• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.216-226
• /
• 2015

The neutral beam injection generate ultra-high temperature energy in the tokamak of nuclear fusion. The neutral beam injection make up arc power supply, filament power supply and acceleration & deceleration power supply. The arc power supply has characteristics of low voltage and high current. Arc power supply generate arc through constant output of voltage and current. So this paper proposed suitable buck converter for low voltage and high current. The proposed buck converter used parallel switch because it can be increased capacity and decrease conduction loss. When an arc generated, the neutral beam injection chamber occur high voltage. And it will break output capacitor of buck converter. Therefore the output capacitor was removed in the proposed converter. Thus the proposed converter should be designed for the characteristics of low voltage and high current. Also, the arc power supply should be guaranteed for system stability. The proposed parallel buck converter enables the system stability of the divided low output voltage and high current. The proposed converter with constant output be the most important design of the output inductor. In this paper, designed arc power supply verified operation of system and stability through simulation and prototype. After it is applied to the 288[kW] arc power supply for neutral beam injection.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1470-1478
• /
• 2015

Adjuvant is an immune enhancer commonly used during vaccination to enhance the host immune response. In the present study, we produced the several recombinant protein from immune related gene of olive flounder (Paralichthys olivaceus). Especially, to produce the soluble type of recombinant protein, we constructed the MBP (Maltose binding protein) fusion G-CSF (Granulocyte colony stimulating factor) recombinant protein among the flounder immune related genes. To verify the immune stimulatory effect and safety of this recombinant protein (rPoGCSF), expression changes of several immune genes were tested using quantitative real-time PCR method with gene specific primer from flounder head kidney leukocytes. As a result, we confirmed that the rPoGCSF has an ability of immune stimulatory effect, also it has broad range of pH and temperature.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.771-776
• /
• 1997

The various shape of calcium carbonate were prepared. For the preparation of the PP/$CaCO_3$ composite, these synthetic calcium carbonate(cubic, spheric and neddle type) and PP were mixed on a two roll mill and the mixture were pressed into plate. The effect of particle shape in the prepared composite on the crystallization temperature, heat of fusion, size of spherulite and mechanical properities were investigated. It was found that the former four were strongly influenced by that. When, especially, vaterite was mixed with PP, the size of spherulite was smaller and the degree of crystallinity was higher than others. Therefore, the tensile strength and Young's modulus were higher.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.5
• /
• pp.235-243
• /
• 2008

Ni-C composite films were prepared using a combination of microwave plasma CVD and ion beam sputtering deposition working in a codeposition way. The structure of these films was characterized by energy-dispersive X-ray diffraction (EDXRD), transmission electron microscopy (TEM) and Raman spectroscopy. It was found that a nickel carbide phase, $Ni_3C$ (hcp), formed as very fine crystallites over a wide temperature range when Ni-C films were deposited at low $CH_4$ flow rates. The thermal stability of this nonequilibrium carbide $Ni_3C$ was also studied. As a result, the $Ni_3C$ carbide was found to decompose into nickel and graphite at around $400^{\circ}C$. With high $CH_4$ flow rates (> 0.2 sccm), the structure of the Ni-C films became amorphous. The formation behavior of the carbide and amorphous Ni-C phases are discussed in relation to the electrical resistivity of the films.

• Journal of Welding and Joining
• /
• v.22 no.5
• /
• pp.65-72
• /
• 2004

The tendency and degree of hot cracking of high strength 5083, 6N01 and 7N01 Al alloy welds by using DCSP-GTAW through modified Varestraint test and autogenous butt welding were investigated. In hot cracking test, 6N01 alloy showed the highest susceptibility to hot cracking in the weld metal and HAZ. Cracking susceptibilities generally increased with increase of solidification temperature range of the base metal and bead penetration-to-width ratio of the weld metal. The cracks in welds of the alloys vertically formed to solid-liquid interface and propagated along with columnar grain boundaries. The fracture facets of cracks showed the typical morphology of solidification crack observed as dendritic structures. Especially, in 6N01 alloy, liquation cracks which were due to elements of Si, Fe and Mg also observed in HAZ near fusion boundary. In butt welding of different Al alloys, the bead crack was mainly occurred in the welds of 6N01, 7N01 and other Al alloys together with 6N01 or 7N01. In the butt welds of 7N01, it was found that the component of Cu had an effect on the higher susceptibility to the hot cracking.

• Journal of Sensor Science and Technology
• /
• v.20 no.5
• /
• pp.311-316
• /
• 2011

Monitoring the carbon dioxide concentration in arterial blood is vital for the evaluation and prevention of pulmonary disease. Yet, domestic pure arterial blood carbon dioxide sensor technologies are not being developed, instead all sensors are imported. In this paper, we develop a real time monitoring system for arterial blood partial pressure of carbon dioxide($pCO_2$) gas from the wrist by using a carbon micro-heater. The micro-heater was fabricated with a thickness of 0.3 ${\mu}m$ in order to collect the carbon dioxide under the skin. The micro-heater has been designed to perform temperature compensation in order to prevent damage to the skin. Two clinical trials of the system were undertaken. As a result, we demonstrated that a portable, transcutaneous carbon dioxide analysis($TcpCO_2$) device produced domestically is possible. In addition, this system reduced the analysis time significantly. Carbon films could reduce the unit price of these sensors by replacing the gold film used in foreign models. Also, we developed a real time monitoring system which can be used with optical biosensors for medical diagnostics as well as gas sensors for environmental monitoring.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.4
• /
• pp.727-731
• /
• 2010

The gene APE0743 encoding the superoxide dismutase (ApSOD) of a hyperthermophilic archaeon Aeropyrum pernix K1 was cloned and overexpressed as a GST fusion protein at a high level in Escherichia coli. The expressed protein was simply purified by the process of glutathione affinity chromatography and thrombin treatment. The ApSOD was a homodimer of 25 kDa subunits and a cambialistic SOD, which was active with either Fe(II) or Mn(II) as a cofactor. The ApSOD was highly stable against high temperature. This thermostable ApSOD is expected to be applicable as a useful biocatalyst for medicine and bioindustrial processes.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.378-384
• /
• 1998

We investigated the possibility of systemizing data for the colour gradation of classical ceramics by build-ing program and D-basing each data information in pottery field that has been fall behind in forming data be-cause of many variable and lacking of data system. In this study we manufactured $CoAl_2O_4$ stain that has stable spinel structure at high temperature and then mixed base glaze with stain for the additive per-centage of 0.5 , 1, 5, 10, 15 wt% In thie colouring of Lime base glaze with the wide ranged melting tem-perature the colour development of cobalt-blue sintered at $1250^{\circ}C$ is better than that of $1150^{\circ}C$ $1350^{\circ}C$ The experimental conditions and data are D-based simulated programming of computer. The result of -based data appeared to be more smoothed fusion-adherence in the Matt glaze range of Lime base glaze, The variation of colouring is not found when additive content of glaze is more than 5 wt% and the stable colour development of stain was shown at the content that RO, $R_2O$ percentage is high (the content that R2O3 per-centage is low)

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1533_1534
• /
• 2009

This paper presents an atmospheric micro glow plasma-jet device. The device consists of four components; a thin Ni anode, a porous alumina insulater, a stainless steel cathode and an aluminum case. The Ni anode is fabricated using micromachining technology. The anode has 10 holes, of which the hole diameter and the depth are $250{\mu}m$ and $60{\mu}m$, respectively. The discharge test is performed in nitrogen gas at atmospheric pressure for 20 kHz AC bias. The breakdown voltage is 3.5 kV at gas flow rate of 4 L/min and the the plasma-jet is blown out to ambient at 5.5 kV. In order to verify the characteristics of plasma, the current and the voltage of device are measured. The maximum temperature of plasma is $37^{\circ}C$. The plasma is well generated and stable at high voltage.

• Korean Institute of Interior Design Journal
• /
• v.26 no.5
• /
• pp.34-41
• /
• 2017

It is necessary to conduct a basic research on fusion of ighting design or lighting environment to improve the health and quality of life of elderly people. The purpose of this study is to analyze the lighting situation of elderly people 's residential facilities in terms of space environment design plan and to analyze the trends in smart home, design and technology. It is to provide basic data for the prototype of lighting fixtures for elderly people living facilities considering functional, physiological and emotional characteristics. For the study, the target sites were selected and the results of the illumination survey of the target facilities were divided into two types of spaces, residential and other public spaces, and their location, lighting fixtures' type, color temperature, illuminance. The results of the survey showed that the overall physical illumination compared to the recommended illuminance for the elderly satisfied the recommended range and provided the appropriate brightness for the elderly. However, in the application layout of the lighting fixtures, a monotonous arrangement and a lighting fixtures type consisting entirely of simple square type fixtures and downlight types were applied. It would be desirable to use different types of lighting fixtures in the design for various functions, such as making the environment more comfortable. Future research will propose a prototype for the design direction of the subdivided lighting fixtures that classify the space according to functions and understand the vision problem of the elderly while aesthetically.