• 한국융합학회논문지
• /
• 제10권11호
• /
• pp.209-215
• /
• 2019

디지털헬스케어에서 가장 중요한 개인 건강관리는 주로 만성질환자에게 매우 중요한 문제이다. 따라서 실시간 건강관리를 위한 간단한 웨어러블 디바이스 개발이 중요하다. 기존 혈압 추정 웨어러블 디바이스는 PPG 특성을 통해 PTT를 분석하여 혈압 추정 알고리즘을 제안하고 있다. 그러나 PPG의 재현성과 여러 가지 PTT의 적용여부와 측정자의 신체적 차이에서 발생되는 변수 등 알고리즘의 영향인자가 사실 매우 복잡하다. 따라서 본 연구에서는 PTT와 SBP, DBP의 상관관계를 분석하고, 다바이스 소형화를 위해 PPG센서만을 사용하게 설계하였다. 제안된 혈압 추정 알고리즘은 PPG간의 차이와 심박수, 개인적인 변수 등을 고려하였다. 또한 기존 의료기관에서 사용하는 공기가압방식의 결과값과 개발된 알고리즘을 통해 추정된 혈압값과 비교를 통해 확인하였다.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.273-282
• /
• 2023

In this study, the surface of Polyetheretherketone (PEEK) disks was modified to have a hydrophilic surface by applying a coating of Polyethylene glycol (PEG), Hyaluronic acid(HA), and Poly-Dopamine(PDA). The investigation aimed to examine whether the coated surfaces showed enhanced bioactivity for orthopedic applications compared to the pure PEEK. The microstructure, surface characteristics, and wettability of PEEK coated with PEG, HA, and PDA were analyzed using scanning electron microscopy(SEM), FT-IR spectrophotometer, Roughness Measurement System, Micro-Vickers, and Contact angle measurement. The mechanical properties were analyzed using a tensile testing machine, while the MTT assay for cell activity was analyzed using a microplate reader to measure optical density. According to the SEM and FT-IR results, the composition and crystal structure of PEG, HA and PDA coated surface were verified. Also, roughness, hardness, and contact angle were all improved in the coating group compared to the pure PEEK. We checked the HepG2 cell proliferation by using MTT assay on 7th days. In MTT assay results, HepG2 cell proliferation was increased with time, at 7 days, cell viability on discs coated with PDA was significantly higher than pure PEEK, PEG, HA coated group. PDA coated PEEK exhibited the highest surface roughness, hardness, contact angle, and cell activity. The mechanical properties were not affected by the presence of the coating.

• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.435-441
• /
• 2014

V2X 협력통신 시스템은 차량 운전을 쉽고 안전하게 할 수 있도록 도와주는 융합기술로 실제 교통상황에서 이러한 기술을 평가하고 효과를 예상하기 위해서는 실차 기반의 도로 구축과 통신 장비 구축, 검증 전문 인력 투입을 필요로 하며 많은 비용과 시간을 투입해야한다. 위와 같은 이유로 연구소 및 대학에서는 개발한 시스템을 테스트 하는데 어려움을 겪고 있으며, V2X 장비 개발이 가속화됨에 따라 차량 안전 어플리케이션과 V2X 통신기술을 테스트 할 수 있는 신뢰성 있는 테스트베드 구축에 대한 필요성이 증가하고 있다. 본 논문에서는 위와 같은 문제점들을 해결하기 위해 시뮬레이션을 기반으로 하는 테스팅 환경을 구성하기 위하여 External 인터페이스 구현을 통하여 트래픽 시뮬레이터와 네트워크 시뮬레이터를 연동하는 시스템을 구현하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권4호
• /
• pp.243-247
• /
• 2014

The Spinal cage is the cage-shaped implantable medical device used to treat structural abnormalities caused by degenerative intervertebral disks. In order to secure enough space to provide the mechanical stability and the intervertebral fusion, after removing the intervertebral disc, the Spinal cage is transplanted between the intervertebral space. A hammer is used to push the spinal cage into a narrow space during the spinal cage transplant surgery. Due to the impact and pressure, damage occurs frequently on the spinal cage. In this study, a test model is constructed to measure the value of impulse generally applied on the Spinal cage. The figures of internal impulse before and after the improvement of the Spinal cage are then compared to suggest direction to improve the reliability of the spinal cage.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.898-904
• /
• 2010

Unmanned autonomous forklifts have a great potential to enhance the productivity of material handling in various applications because these forklifts can pick up and deliver loads without an operator and any fixed guide. There are, however, many technical difficulties in developing such forklifts including localization, map building, sensor fusion, control and so on. Implementation, which is often neglected, is one of practical issues in developing such an autonomous device. This is because the system requires numerous sensors, actuators, and controllers that need to be connected with each other, and the number of connections grows very rapidly as the number of devices grows. Another requirement on the integration is that the system should allow changes in the system design so that modification and addition of system components can be accommodated without too much effort. This paper presents a network-based distributed approach where system components are connected to a shared CAN network, and control functions are divided into small tasks that are distributed over a number of microcontrollers with a limited computing capacity. This approach is successfully applied to develop an unmanned forklift.

• 센서학회지
• /
• 제20권5호
• /
• pp.311-316
• /
• 2011

Monitoring the carbon dioxide concentration in arterial blood is vital for the evaluation and prevention of pulmonary disease. Yet, domestic pure arterial blood carbon dioxide sensor technologies are not being developed, instead all sensors are imported. In this paper, we develop a real time monitoring system for arterial blood partial pressure of carbon dioxide($pCO_2$) gas from the wrist by using a carbon micro-heater. The micro-heater was fabricated with a thickness of 0.3 ${\mu}m$ in order to collect the carbon dioxide under the skin. The micro-heater has been designed to perform temperature compensation in order to prevent damage to the skin. Two clinical trials of the system were undertaken. As a result, we demonstrated that a portable, transcutaneous carbon dioxide analysis($TcpCO_2$) device produced domestically is possible. In addition, this system reduced the analysis time significantly. Carbon films could reduce the unit price of these sensors by replacing the gold film used in foreign models. Also, we developed a real time monitoring system which can be used with optical biosensors for medical diagnostics as well as gas sensors for environmental monitoring.

• 한국인공지능학회지
• /
• 제6권1호
• /
• pp.1-10
• /
• 2018

Compressed Air is an important energy source used in most factories nowadays. The automation trend using air compressor has been gradually increasing with the interest of the 4th industry in recent years. With the air compressor system, it is possible to construct the device at low cost and easily achieve automation and energy saving. In addition, With trend of FA, miniaturation and light weight manufacturing trend expand their use in the electronics, medical, and food sectors. Research method is to design the technology for the remote control of the following information as USN base. Development of flexible sensing module from real time observation module for fusion of IT technology in compressed air systems, design and manufacture of flexible sensing module, and realiability assessment. Design of real-time integrated management system for observation data of compressed air system - Ability to process observation data measured in real time into pre-processing and analysis data. This study expects unconventionally decreasing effect of energy cost that takes up 60~70% of air compressor layout and operation and maintenance management cost through USN(Ubiquitous Sensor Network) technology by using optimum operational condition from real time observation module. In addition, by preventing maintenance cost from malfunction of air compressor beforehand, maintenance cost is anticipated to cut back.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.23-28
• /
• 2010

최근 스마트폰을 가지고 있는 사람이 증가하고 있는 추세이며 이에 대한 다양한 연구가 활발히 진행 중이다. 이러한 상황에서 센서기술과 스마트폰의 융합으로 다양한 기능을 제공한다. 본 논문에서 제안한 시스템은 컨트롤러에서 3축가속도센서를 통한 사용자의 움직임에 대한 가속도정보를 추출하며 이 가속도 정보를 블루투스를 통하여 스마트폰에 전송한다. 기존의 스마트폰에서 사용되던 터치입력이나 버튼입력방식이 아닌 동작에 따른 3축 가속도센서를 이용한 입력방식이므로 언제 어디서든 스마트폰을 직접 만지지 않아도 컨트롤이 가능하다. 또한 다양한 기능성 애플리케이션의 개발로 인하여 활용도가 매우 높다.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.11-18
• /
• 2016

Today, wearable technology products are used in a wide range of consumer, healthcare, bio-medical, and industrial applications. The market for wearable technology products is expected to increase dramatically over the next several years. In addition, concerns for safety, performance and reliability of wearable products keep increasing and will be essential for widespread acceptance in the marketplace. Wearable smart devices, which are generally in contact with the human body and skin, are exposed to the risk of the electric shock, burn, and explosion. Therefore, the standardization of wearable devices in terms of human safety and reliability should be very important. Furthermore, the development of test method and test certification of the wearable products will be one of the key technology for mass production. Such standardization and certification will help consumers to choose the safest and best quality wearable devices and allow manufacturers to prove the safety and quality of their products, thereby helping them to gain a competitive technology. This paper discusses the current status of the wearable smart devices as well as the standardization and test certification applicable to wearable technology products.

• 센서학회지
• /
• 제25권2호
• /
• pp.116-123
• /
• 2016

This paper presents the fabrication and evaluation of the novel drag force type air flowmeter using MEMS technologies for the vehicle applications. To obtain the air drag force, the flowmeter utilized the curved beam structure, which was realized by the difference of residual stress between the silicon oxide layer and the silicon nitride layer. The paddle structure was applied for the maximum air drag force, and the dual-beam was adapted to prevent distortion. The basic experiments were performed in the wind tunnel, and the stable outputs were obtained. The device was applied to the internal combustion engine, and the results were compared with the HI-DS output where the convection thermal flowmeter was used as the reference sensor. The results indicated that the comparable resolutions and response times were obtained under the various engine speeds.