• 제목/요약/키워드: Furrow Depth

검색결과 24건 처리시간 0.026초

토양의 제자리 반전을 위한 몰드보드 플라우의 개발 (Development of a Moldboard Plow to Invert Furrow Slice at the Same Position)

  • 이규승;박원엽;권병기
    • Journal of Biosystems Engineering
    • /
    • 제29권1호
    • /
    • pp.9-20
    • /
    • 2004
  • On the basis of design theory of soil inversion, two types of moldboard plow with secondary soil mover was designed and constructed to invert furrow slice at same position with furrow bottom. A series of soil bin experiment was carried to investigate the performance of prototypes. First prototype of new concept plow showed two kinds of problems during the preliminary experiment. For the plowing depth of 6cut the prototype did not invert the furrow slice, instead it just cut furrow bottom and the furrow slice returned to the original position. For the plowing depth of 8cm, there was soil clogging problem at the rear part of plow. From the above results it was concluded that the first prototype can not be used for the inversion of furrow slice at same position with furrow bottom. Second prototype could invert furrow slice at the same position with furrow bottom, but the performance was affected by soil moisture content soil hardness and plowing speed very much. For the higher soil moisture content, for the higher soil hardness and higher plowing speed, the prototype showed higher soil inversion performance. For the second prototype the inversion ratio was almost 100%, inversion angle was in the range of 90 to 100 degree and side displacement was less than 4 cm. But the furrow slice was not continuous, it was cut in the length of 30 to 40 cm. The reason why the furrow slice was cut in that length is blamed for the design of moldboard surface. The specific draft of prototype was in the range of 37.24 kN/㎡ to 42.14 kN/㎡ this value is a little higher than that of the conventional plow, or from 30.38 kN/㎡ to 33.32 kN/㎡. But the difference was not so big. The inversion performance of the second prototype for the field experiment was much better than that of soil bin experiment due to the better soil and operational conditions. Sticky and compacted soil conditions, and higher plowing speed was suitable for the plowing operation of the second prototype

벼 무논골뿌림 재배에서 파종전 논 굳힘 일수 및 골깊이가 입모 및 생육에 미치는 영향 (Effect of Drainage Duration before Seeding and Furrow Depth on Seedling Establishment and Growth in Direct Drill Seeding Culture of Rice on Puddled Soil)

  • 김상수;백남현;석순종;이선용;김종호;조동삼
    • 한국작물학회지
    • /
    • 제39권6호
    • /
    • pp.531-536
    • /
    • 1994
  • 벼 무논골뿌림재배에 알맞는 파종 전 논 굳힘정도와 파종골깊이를 구명하기 위하여 1993년에 전 북통(미사질토양)에서 동진벼를 공시하고 논 굳힘 일수와 파종골깊이를 달리하여 시험한 결과를 요약하면 다음과 같다. 1. 입모율은 논 굳힘 일수가 길수록 골깊이가 얕을수록 높았으며, 원추 관입심은 논 굳힘일수가 길수록 낮아졌는데 무논골뿌림재배에 알맞는 굳힘 일수는 4일로 이때 토양의 경도는 원추 관입심으로 6∼7cm 정도이었다. 2. 줄기 매몰심도는 논 굳힘일수가 짧을수록, 골이 깊을수록 깊어졌는데 줄기 매몰정도가 낮았던 4일 또는 6일 굳히고 골깊이를 2cm로 한 처리에서는 도복이 발생하였다. 3. 출수기는 입모수가 적었던 골깊이 6cm처리에서 4cm처리보다 1∼2일이 지연되었다. 4. 쌀 수량은 2일 굳힘에서는 골깊이 2cm에서, 4일 굳힘에서는 골깊이 4cm에서, 6일 굳힘에서는 골깊이 6cm에서 가장 많았다. 5. 이상에서와 같이 미사질토양에서 벼 무논골뿌림 재배시 입모율, 도복, 및 수량을 고려한 파종 전 논 굳힘 일수는 4일로써 토양경도는 원추 관입심으로 6∼7cm이며 이때 파종골의 깊이는 4cm로 하는 것이 좋을 것으로 생각된다.

  • PDF

이랑폭과 고랑깊이 및 재배년수에 따른 도라지뿌리썩음병 발생양상 (Characteristics of Rhizome Rot incidence of Platycodon grandiflorus by Ridge width and Depth and Cultivation Period in the Seeding Place)

  • 김호정;조영손
    • 한국약용작물학회지
    • /
    • 제19권4호
    • /
    • pp.246-250
    • /
    • 2011
  • This study was carried out to investigate the characteristics of Rhizome rot incidence of Platycodon grandiflorus by cultivation period and ridge width and furrow depth. The three types of ridge width 0.8, 1.0, and 1.2 m and several levels of furrow depth and 6 levels cultivation period. This experiment was done in farmer's farm and the treatments were also classified in the same spot. In this investigation, ridge width, soil water content, soil hardness, and cultivation period were positively related with Rhizome rot incidence, however, furrow depth was negatively related with that. So this experiment could draw a conclusion : excess water damage and soil hardness could directly or indirectly effect on the Rhizome rot incidence, so cultivation method should be developed such as making underground ditch or cultivation in well draining soil for escaping excess waster damage.

벼 무논 골 뿌림재배 파종방법 및 담수시기 (Sowing Method and Flooding Time at Furrow Sowing Culture of Rice in Paddy Field)

  • 송영주;권석주;황창주
    • 한국작물학회지
    • /
    • 제39권3호
    • /
    • pp.205-210
    • /
    • 1994
  • 최근 담수직파 재배양식중 승용형 골뿌림 파종기를 이용하여 파종골을 작성, 이와 동시에 종자를 파종하고, 생육기간동안 골이 자연적으로 매몰됨으로서 도체가 지지력을 가져 직파재배시 단점중의 하나인 도복을 경감시킬 수 있다는데 근거를 두고 시험연구가 급속히 진행되고 있는 무논 골 뿌림 재배법 확립의 일환으로, 먼저 초기 입묘와 밀접한 관계가 있는 파종전 토양굳힘정도, 파종 골 깊이, 그리고 파종후 담수시기 구명을 위하여 시험한 결과는 아래와 같다. 1. 파종전 토양의 굳힘정도는 파종시 종자의 매몰정도, 파종후 담수시 종자 부유상태 및 생육기간동안 골 매몰로 인한 줄기매몰심도등을 고려할때 경운정지후 낙수하여 3일정도 굳힌상태 즉, 115g의 원추관입심이 6~7cm정도인 상태가 적절하였다. 2. 파종골 깊이별 최고 분얼기에 조사한 토양매몰정도는 4~6cm심도의 경우 3~4cm정도의 토양매몰이 이루어졌으며, 입묘율은 골 깊이가 깊을수록 떨어지는 경향이었다. 표면조파(0cm)의 경우 부묘가 발생되었으며, 골 깊이별 뿌리 분포비율은 파종심도가 낮을수록 표층의 뿌리 분포 비율이 높고, 도복정도 역시 8 정도로 매우 높아서, 줄기 매몰심도 및 도복정도 그리고 수량성으로 볼때 파종골 깊이는 4cm정도가 적당하였다. 3. 파종후 담수시기가 늦어질수록 입묘율이 떨어졌으며, $m^2$ 당수수의 확보 역시 적어서 담수시기는 파종직후 담수가 바람직 하였다.

  • PDF

보행형 관리기 부착형 2조식 부분 중경제초기의 개발 (Development of a 2-row Type Band Furrow Tiller for a Walking Cultivator)

  • 김찬수;김기대
    • Journal of Biosystems Engineering
    • /
    • 제32권4호
    • /
    • pp.223-229
    • /
    • 2007
  • This study was conducted to develop a 2 row type band furrow tiller for a walking cultivator. The tillage and weeding operations in the furrow of dry fields has been done manually or chemical herbicide has been applied. The application of herbicide induces soil pollution and manual operation requires heavy labor. This 2-row type implement was developed to substitute this manual operation and to minimize soil pollution. The developed implement was composed of power transmitting device, tilling device, frame and tail wheel. The max. plowing width and depth were 300mm and 180mm, respectively. The revolutions of the hexagonal shaft and the tillage shaft were $227{\sim}376rpm$ and $355{\sim}590rpm$, respectively. The adequate working speed was $0.50{\sim}0.83m/s$ and the field capacity was $0.17{\sim}0.28hr/10a$.

미소안면침 시술 후 안면 주름 측정값 변화에 대한 임상적 고찰 (Clinical Study on Facial Skin Furrow Measurement Changes after Miso Facial Rejuvenation Acupuncture)

  • 권나현;김찬영;신예지;서산;송정화;백용현;우현수;박동석
    • Journal of Acupuncture Research
    • /
    • 제26권6호
    • /
    • pp.133-140
    • /
    • 2009
  • Objectives : Miso facial rejuvenation acupuncture is a Korean medical treatment technique for face lifting. The authors aimed to evaluate the effects of Miso facial rejuvenation acupuncture on facial skin furrows. Methods : 11 patients who made first visits to Hyo-Jun Korean Medical Clinic from October 1, 2009 to October 25, 2009 were each given one-time treatment of Miso facial rejuvenation acupuncture treatment. A portable fluorescent dermal diagnostic equipment, ECOSKIN, was used to measure extraocular skin furrows and perioral skin furrows width and depth before and after treatment. Results : Mean width and depth of both the extraocular and perioral skin furrows decreased after one-time Miso facial rejuvenation acupuncture treatment. Extraocular skin furrow width, depth, and perioral skin furrow width showed statistically significant decreases(p=0.003, 0.017, 0.041 respectively). Conclusions : Mean depth and width of both the extraocular and perioral skin furrows decreased after receiving Miso facial rejuvenation acupuncture treatment. Miso facial rejuvenation acupuncture may be an effective treatment for improving wrinkles in clinic.

  • PDF

솔잎혹파리의 약제방제에 관한 연구 VI. 입제형 침투성 살충제의 근계주변 토중처리효과 (Chemical Control of the Pine Gall Midges(Thecodiplosis japonensis Uchida et Inouye) VI. Effect of the Root-Zone Treatments of Some Granular Systemic Insecticides)

  • 최승윤;박형만;정부근
    • 한국응용곤충학회지
    • /
    • 제21권3호
    • /
    • pp.138-141
    • /
    • 1982
  • 본 시험은 침투성 살충제의 적송 근계주변 토중처리에 의한 솔잎혹파리의 방제효과를 검토하여 유교 살충제의 선발, 나아가 현행 근계주변 토중처리 방법을 성력적인 처리방법으로 개선하기 위하여 실시하였다. Aldicarb$(Temik^{(R)}\;15G)$, Carbofuran$(Curaterr^{(R)}\;3G)$, Disulfoton$(Disyston^{(R)}\;5G)$를 고시, 흉고직후 cm 당 5g(유효성분량)을 근계주변원형처리(6월 25일)하여 솔잎 혹파리의 방제효과를 검토하였다. $Curaterre^{(R)},\;Temik^{(R)}$ 처리는 솥잎혹파리의 방제효과가 우수하였으나 Disyston 처리의 방제효과는 낮은 편이었다. 난, 무처리에서 건전엽률, 피해흔적엽율은 각각 $49.9\%,\;16.4\%,\;33.7\%$인데 비하여 $(Temik^{(R)}$ 처리에서는 그들이 각각 $27.9\%,\;65.4\%,\;6.7\%$이었고 $Curaterr^{(R)}$ 처리에서는 각각 $64.8\%,\;23.7\%,\;1.5\%$이었으며 $Disystone^{(R)}$ 처리에서는 각각 $49.6\%,6.3\%,\;24.1\%$ 이었다. 처리방법 개선을 위한 시험에서는 $Temik^{(R)}$ 공시, 균고직경 cm 당 5g(유교성분량)을 6월 2일에 점식구 처리 (Pit treatment), 방사상식고랑처리(Radical furrow treatment), 근계주변 원형식고랑처리(Circle furrow treatment)로 나누어 실시하였다. 점식구멍처리에서는 구멍수의 증가에 따라 충영엽율이 낮었으며 방사상식고랑처리는 고랑수에 따른 충영엽율에 현저한 차이를 보이지 않았다. 그리고 현행 근계주변 원형식고랑처리는 점식 3구멍처리와 대등한 솔잎혹파리의 방제효과가 있었다. 결론으로 $Temik^{(R)}$$Curaterr^{(R)}$의 토중처리효과는 대등하여 $Temik^{(R)}$의 대체 가능하다고 보며 $Temik^{(R)}$의 점식 3구멍 처리방법을 도입함으로서 토중처리에 소요되는 노동력을 크게 절감할 수 있을 것으로 사료된다.

  • PDF

건강한 한국인 청년에서 성별에 따른 피부표면 미세지형 분석 (Analysis of Skin Micro-relief on Healthy Korean Youth According to Sex)

  • 김현욱;오승학;김남숙;나지은;이상훈;박인성;권순욱;류임주
    • Applied Microscopy
    • /
    • 제42권1호
    • /
    • pp.35-42
    • /
    • 2012
  • 피부는 인체에서 가장 큰 조직으로 가장 바깥쪽에 존재하며 다양한 기능을 수행한다. 항상성 유지를 위한 체온조절, 외부 이물질 등에 대한 보호작용, 그리고 촉각이나 통각 및 온도를 느끼는 역할을 수행한다. 이러한 피부는 손톱, 발톱, 털, 땀샘 등의 다양한 부속기관을 가지고 있으며 나이, 성별, 생활환경 등에 의해 다양한 특징을 보이게 된다. 특히 손발의 주름과 같은 미세지형은 피부의 부위에 따라 다양한 형태를 지니며 성별에 따른 차이도 보이는 것으로 알려져 있다. 그러나 한국인 건강한 청년의 피부미세지형에 관한 연구는 아직 진행되지 않았다. 따라서 본 연구에서는 한국인 청년을 대상으로 아래팔 앞쪽, 손등 그리고 가운데 손가락 첫째 마디 등쪽의 피부미세지형을 분석하고 성별 및 위치에 따른 차이를 분석하고자 한다. 실리콘을 이용하여 측정하고자 하는 피부 위치의 모사판을 획득하였으며 획득된 시료는 주름의 빈도, 폭, 깊이 등을 측정하기 위하여 얇게 세절하여 실체현미경으로 촬영 하였으며 성별간 차이와 성별 내 위치간 차이에 대해 측정 및 분석하였다. 남성과 여성에서 주름 빈도의 경우 손등과 아래팔 앞쪽은 여성이, 손가락은 남성이 통계적으로 유의하게 높았으며 동일 성별의 경우 남녀 모두 손가락의 경우에 주름의 빈도가 높게 나타남을 알 수 있었다. 상기 연구에 의한 결과는 건강한 젊은 남녀 한국인 피부 미세지형 자료로 추후 진행될 피부와 관련된 다양한 연구에 기초자료로 활용될 수 있으리라 생각된다.

역토내(壢土內)의 응력분포(應力分布)에 관(關)한 연구(硏究) (A Study on the Soil Stress Distribution in Furrow Slice)

  • 이기명;이석건;김태한
    • Journal of Biosystems Engineering
    • /
    • 제7권2호
    • /
    • pp.1-7
    • /
    • 1983
  • 경운시(耕耘時) 토양조건(土壤條件) 및 절삭조건(切削條件)에 따른 역토내의 응력분포(應力分布)를 파악(把握)한 목적(目的)으로 토양응력계(土壤應力計)를 시작(詩作)하여 소형토양조(小型土壤槽)을 사용(使用)한 실험(實驗)에서 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 가. 절삭조건(切削條件) 및 토양조건(土壤條件)은 주응력(主應力)의 방향(方向)에 영향(影響)을 미치지 않는다. 나. 절삭조건(切削條件)에 따른 주응력(主應力)의 크기는 경심(耕深)이 클수록 최대(最大) 주응력(主應力)이 증대(增大)하는 경향(傾向)이 있으나 절삭각(切削角)의 변화(變化)에는 그 영향(影響)이 나타나지 않았다. 다. 토양조건(土壤條件)에 따른 주응력(主應力)의 크기는 토양수분(土壤水分) 함량(含量)이 많아질수록, 점토분(粘土分)이 많을수록 최대(最大) 주응력(主應力)이 증대(增大)하는 경향(傾向)이 있다. 라. 전단면상(剪斷面上)에서의 응력분포(應力分布)는 모래 성분(成分)이 많은 토양(土壤)일수록 상층(上層)의 응력(應力)이 0에 접근(接近)하고 점토성분(粘土成分)이 많은 토양(土壤)일수록 상층(上層)의 응력(應力)이 증가(增加)하여 상하층(上下層)의 응력(應力)이 같아진다.

  • PDF

인제군 내린천의 포트홀 지형 분석 (Analysis on pothole landforms at Naerin River in Inje-gun)

  • 이광률;김대식;김창환
    • 한국지형학회지
    • /
    • 제19권2호
    • /
    • pp.113-122
    • /
    • 2012
  • 본 연구는 강원도 DMZ 지오파크의 지오사이트를 발굴하기 위하여, 인제군 내린천의 포트홀을 대상으로 지형 특성을 분석하였다. 내린천의 P1, P2 지역은 유수의 방향을 따라 고랑형 와지인 퍼로우형 포트홀이 주로 나타나고, P3 지역은 퍼로우형 포트홀이 밀집된 구역과 여러 유형의 포트홀이 산재된 구역이 구분되며, P4 지역은 여러 유형의 소규모 포트홀이 산재되어 있다. 총 44개 포트홀을 계측한 결과, 단면이 U자형인 포트홀, 유향과 일치하는 방향성을 가진 포트홀, 내부에 자갈이 퇴적되어 있는 포트홀 등이 길이, 폭, 깊이, 경사도에서 모두 큰 값을 보이는 것으로 나타났다. 내린천의 P1, P2 지역은 포트홀의 규모와 형태가 매우 특징적이며 경관이 아름답기 때문에 지오사이트로 개발하기 양호한 곳으로 판단된다.