• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2014년도 추계 종합학술대회 논문집
• /
• pp.367-368
• /
• 2014

본 연구는 전통적 하이힐과 수정보완된 하이힐 착용 시 간에 서있는 자세에서 족부압력과 정적균형을 비교하여 수정보완된 하이힐이 서 있는 자세에 미치는 영향을 알아보고자 하였다. 여대생 15명을 대상으로 하루 간격을 두고 동일한 대상에게 전통적 하이힐과 수정보완된 하이힐을 각각 착용하게 한 후 족부압력과 정적균형을 측정하여 비교 분석하였다. 그 결과, 수정보완된 하이힐의 족부압력은 전통적 하이힐보다 전족부는 유의하게 감소하고 후족부는 유의하게 증가하였다. 그리고 정적균형 능력은 전통적 하이힐보다 개선되었으나 유의하지 않았다. 따라서 수정보완된 하이힐이 전통적 하이힐보다 좀 더 정상적인 족부 압력을 가지게하고 그에 따라 균형능력에도 긍정적인 영향을 보일 것으로 생각된다.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.153-168
• /
• 2005

The purposes of this study were to determine the influence of midsole hardness and sole thickness of sports shoes on ball flex angle and position with increment of running velocity. The subjects employed for this study were 10 college students who did not have lower extremity injuries for the last one year and whose running pattern was rearfoot striker of normal foot. The shoes used in this study had 3 different midsole hardness of shore A 40, shore A 50, shore A 60 and 3 different sole thickness of 17cm, 19cm, 21cm. The subjects were asked to run at 3 different speed of 2.0m/sec, 3.5m/sec, 5.0m/sec and their motions were videotaped with 4 S-VHS video cameras and 2 high speed video cameras and simultaneously measured with a force platform. The following results were obtained after analysing and comparing the variables. Minimum angle of each ball flex position were increased with the increment of running velocity and shoe sole thickness(P<0.05), but mid-sole hardness did not affect minimum ball flex angle. The position which minimum angle was shown as smallest was 'D'. Midsole hardness and sole thickness did not affect time to each ball flex minimum angle, total angular displacement of ball flex angle, and total angular displacement of torsion angle(P<0.05). The position which minimum angle was appeared to be earliest was similar at walking velocity, and E and F of midfoot region at running velocity. Total angular displacement of ball flex position tended to increase as shifted to heel. It was found that running velocity had effects on ball flex angle variables, but shoe sole thickness partially affected. It would be considered that running velocity made differences between analysis variables at walking and running when designing shoes. Also, it was regarded that shoes would be developed at separated region, because ball flex angle and position was shown to be different at toe and heel region. It is necessary that midsole hardness and thickness required to functional shoes be analyzed in the further study.

• 복식문화연구
• /
• 제8권4호
• /
• pp.517-536
• /
• 2000

The purpose of this study is to investigate the internal and external line beauty of men's dress of the Chosun period from the views of dress design and dress aesthetics. 1) External Line Beauty of Men's Dress of the Chosun Period ① Functional Beauty : Having the beauty of functional line in terms of convenience, action, effectiveness, practivce and sanitation. ② Structural Beauty : Having the beauty harmonizing between lines of internal and external structures. ③ Ornamental Beauty : Having the beauty of simple line by matching accessories (gat, fan, sejodae, shoes) with a simple dress. ④ Wearing Beauty : Making tall-looking or expressing a mature masculine beauty by a visual mistake caused by a combination of internal and external structural beauty lines. 2) Internal Line Beauty of Men's Dress of the Chosun Period Including a simple but natural beauty based on natural philosophy, the beauty of courtesy emphasizing official hat and dress and the beauty of dress having aesthetic consciousness with which people enjoy an idyllic life.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.509-515
• /
• 2011

Objective: The study was performed to suggest factors to consider when making or selecting protective clothing to enhance farmers' health. The purpose of this study was to review and summarize the agricultural safety technology on clothing including hat, gloves, and shoes. Background: The farmers' work clothing has to meet a multitude of requirement. Risk factors in farm-work were identified by previous researches. Agricultural safety clothing needs to be introduced. Method: We reviewed previous papers regarding the agricultural workers' health, safety clothing to protect body from excessive heat and humid environment, ultraviolet(UV) protection, and hazardous body working postures. Also the UV cut effect, pesticideproof clothing, and preventable farm work related musculoskeletal disorders were discussed. Results: The agricultural safety clothing needs to be developed to provide comfort and to be resistant against heat. The UV protection function on skin and eyes has not been fully researched in safety clothing studies yet. Conclusions and Application: The farmers' work-related body posture needs to be studied in order to make and design agricultural safety clothing. The safety issues on agricultural work shoes are also needed to be included in future studies.

• 패션비즈니스
• /
• 제28권1호
• /
• pp.113-130
• /
• 2024

A questionnaire survey of farmers engaged in actual farming was conducted to investigate the farmers' actual wearing conditions and preferences for agricultural workwear to develop workwear that is suitable for improved agricultural work efficiency. We extracted basic data necessary for the development of agricultural workwear. Analysis of the photographs taken showed differences in the shoes and gloves worn depending on the type of work. The percentages of men and women were equal among the agricultural workers. The age of the agricultural workers was analyzed and the results showed a higher percentage of those over 50 years old, indicating that the age of the agricultural workers was higher than in other industries. It was found that the waist, knees, and elbows of the workers were pulled during work, and analysis showed that the symptoms resulting from clothing pulling were more severe when the wearing dimensions were larger. It was recognized that the important aspects of workwear are those related to work, such as functionality, activity, and work efficiency. In addition to workwear, the most commonly worn auxiliary equipment was gloves, and other items included hats, armbands, work shoes, boots, seat chairs, and masks. When developing rural workwear, it is necessary to consider the fit, type of work, and materials of the workwear. Future research should focus on materials that can improve the functionality of workwear and pattern development that reflects physical and movement characteristics.

• Physical Therapy Rehabilitation Science
• /
• 제6권4호
• /
• pp.182-188
• /
• 2017

Objective: The purpose of this study was to compare ankle function between adults with and without Down syndrome (DS). Design: Cross-sectional study. Methods: Ten adults with DS and 18 without participated in this study and underwent manual muscle test (MMT), range of motion (ROM) assessment, star excursion balance test (SEBT), and functional movement screen (FMS). The tests were demonstrated to increase their accuracy and the actual measurements were assessed after one or two demonstrations. To minimize the standby time and fatigue, the travelled distance and measuring order were adjusted. To remove the influence of shoes on the measurements, the shoes were taken off and only socks were worn. Results: Dorsal and plantar flexion MMTs of both ankles were significantly weaker and plantar flexion ROM of both ankles were significantly lower in adults with DS compared with those without (p<0.05). However, dorsal flexion ROM of both ankles were not significantly different between them. There were significant differences in distances measured in all the directions (anterior, anterolateral, lateral, posterolateral, posterior, posteromedial, medial, and anteromedial directions) of SEBT (p<0.05). Significant differences were also demonstrated in the scores of hurdle step, inline lunge, shoulder mobility, and rotary stability among the seven items of FMS (p<0.05). Conclusions: To enhance the dynamic stability of adults with DS, it is necessary to improve ankle stability by strengthening the ankle dorsal and plantar flexors.

• PNF and Movement
• /
• 제20권3호
• /
• pp.431-441
• /
• 2022

Purpose: The purpose of this study was to compare the changes in the contact area, maximum pressure, maximum mean pressure, and maximum force of functional insoles and general insoles when walking. Methods: Foot pressure was measured by the ignition of functional insoles and general insoles on Company N shoes. The foot pressure was measured using a precision pressure distribution meter (Pedar - X mobile system, Novel, Germany). Each insole sensor contained 99 independent cells and was inserted between the foot and the shoe. A wireless Bluetooth-type program was used to measure the pressure detected by the measuring insoles. In order to eliminate adaptation and fatigue caused by wearing the guide during the experiment, sufficient rest was taken between each experiment, and the wearing order was randomly selected. Results: Functional insole significantly increased the forefoot and midfoot (medial, lateral) (p<0.05), while total foot, forefoot, and rearfoot peak pressure significantly decreased (p < 0.05) compared to the general insole. Conclusion: In the functional insole, a high contact area was measured inside, even in the middle of the foot, leading to a proper change in foot pressure. It was confirmed that the contact area was reduced and dispersion occurred well. In addition, it was found that the maximum pressure in the front and back of the entire foot was reduced, so the weight pressure dispersion in the functional insole was evenly distributed, and the maximum average pressure change was similar.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.613-619
• /
• 2013

This study compares the gait characteristics of elderly women during barefoot walking and walking with sneakers. We measured foot angles, max foot pressure, peak plantar pressure of each plantar region, velocity of Center of Pressure(COP), and axis shifting of COP with an RS-scan system. Elderly women's foot angles were narrower when walking with sneakers than when barefoot walking. We found that the subtalar joint angle (representing ankle joint flexibility) affected walking stability. Regarding the peak plantar pressure of each foot region, pressures were high in the medial regions and the pressures greatly varied depending on the region measured during barefoot walking. The COP moved significantly faster when walking with sneakers than barefoot walking and suggests that elderly women walked faster in sneakers. Axis shifting of the COP decreased during walking with sneakers and indicated that gait balance improved when walking with sneakers. The findings of the present study can be utilized as foundational data for elderly women's gait characteristics as well as data for the production of functional footwear. Future research that focuses on various types of shoes, age groups, and gender are recommended for the development of more functional footwear for stable gaits.

• 국제물리치료학회지
• /
• 제6권2호
• /
• pp.840-845
• /
• 2015

Improvement in functional gait is one of treatment goals in treatment of cerebral palsy children. This study intended to examine the effects of insoles for postural correction on gait in spastic cerebral palsy patients by investigating changes in gait temporal spatial parameters. As the subjects, 15 spastic bilateral cerebral palsy patients participated in this study. Temporal spatial parameters of gait were measured using GAITRite system under three gait conditions. Bare foot gait, gait in shoes, and gait in insoles for postural correction were conducted. In order to look at differences in temporal spatial parameters according to three gait conditions, repeated one way analysis of variance was conducted. As post hoc test, Bonferroni was conducted. A significant level was set at ${\alpha}=.05$. According to the result of this study, gait velocity, cadence, step length, stride length of the left lower extremity significantly changed. When the subjects put on customized insoles for postural correction, the effect was greatest. There were no significant changes in stance time, single support time, double support time, swing % of gait, and stance % of cycle. Therefore, gait with insoles for postural correction positively influenced functional gait improvement and will be able to be usefully employed for spastic cerebral palsy children as one of gait assistance devices.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 춘계학술대회 논문집
• /
• pp.55-64
• /
• 2003

본 연구에서는 노인의 신체 특성에 적합한 고기능성 구두를 개발하기 위하여 한국인에 적합한 리스트를 근간으로 하여 발에 편안한 착화감을 줄 수 있는 노인화를 개발하였다. 본 연구의 핵심 연구분야인 제화 족형 설계·제작은 제화공정에서 가장 중요한 부분으로 본 연구진에 의해 수년간에 걸친 인체 족 측정 및 체계적인 족형설계 과정을 거쳐 제작된 족형을 통한 수차례의 착화시험에 의해 마련된 표준 족형을 근간으로 최종 제작되었다. 이러한 결과를 바탕으로 새로 개발된 노인용 구두는 소비자의 요구에 조금 더 부합하게 하였고, 향후 보다 편리하고 기능성이 향상된 노인용 구두를 제시하기 위한 최적의 라스트를 제작하고 건강기능성 부자재를 선정할 수 있는 기반을 마련하였다.