• Elastomers and Composites
• /
• 제37권2호
• /
• pp.99-106
• /
• 2002

본 연구에서는 산소 플라즈마 처리에 의한 카본블랙의 표면특성과 카본블랙/고무 복합재료의 기계적 계면물성에 대하여 고찰하였다. 산소플라즈마의 산화반응에 의한 카본블랙 표면특성은 표면산도-염기도와 제타전위, 그리고 X-ray photo-electron spectroscopy (XPS)를 통하여 알아보았으며 카본블랙/고무 복합재료의 기계적 물성은 인열에너지 ($G_{III}c$)를 측정하여 관찰하였다. 본 실험결과로부터 플라즈마 처리에 의해 카본블랙 표면에 카르복시기, 하이드록시기, 락톤, 카르보닐기와 같은 산소를 함유하는 극성관능기들이 플라즈마 처리시간이 증가함에 따라 증가하는 경향을 나타내었으며, 카본블랙 표면에 산소를 함유한 관능기와 극성고무인 NBR과 높은 상호작용으로 인해 카본블랙과 고무사이의 계면 결합력이 증가하여 카본블랙/고무 복합재료의 기계적 계면물성인 tearing energy가 증가한 것을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제36권2호
• /
• pp.94-101
• /
• 2001

본 연구에서는 RF-plasma를 사용하여 카본블랙을 $N_2$ 분위기에서 표면처리 하였을 때 카본블랙의 표면 산도 및 염기도와 이온 흡착 특성, 그리고 표면 자유에너지를 통한 물리-화학적변화를 관찰하였다. 그 결과 카본블랙을 플라즈마 표면처리 하였을 경우 표면 자유에너지의 비극성 요소 (${\gamma}s^L$)가 크게 증가함을 고찰하였다. 또한 표면 산도 및 표면 염기도와 이온 교환특성, 제타 전위, 그리고 이온 이동도의 향상 등에 의한 표면 관능기의 발달로 표면처리 시간이 증가됨에 따라 극성요소 (${\gamma}s^{sp}$)인 전자 받게 (${\gamma}s^+$)와 전자 주게 (${\gamma}s^-$) 인자도 증가하는 것을 볼 수 있었다.

• Elastomers and Composites
• /
• 제40권1호
• /
• pp.22-28
• /
• 2005

본 연구에서는 실리카/고무 복합재료의 기계적 계면 물성과 열안정성에 대한 산소플라즈마의 영향에 대하여 살펴보았다. 실리카의 표면특성은 XPS와 접촉각 측정을 통하여 살펴보았다. 실리카/고무 복합재료의 기계적 물성과 열안정성은 각각 인열에너지 ($G_{IIIC}$)와 열중량분석(TGA)를 통하여 관찰하였다. 실험결과, 플라즈마 처리시간이 증가함에 따라 실리카 표면에 산소가 함유된 극성 관능기의 도입량이 증가하였으며, 이에 따라 고무 복합재료의 인열에너지와 열안정성이 향상되었다. 이러한 결과는 NBR과 같은 극성고무가 산소가 함유된 관능기가 도입된 실리카와 상대적으로 높은 상호작용을 하기 때문으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.35-40
• /
• 2007

The new PEI(poly(epoxy-imide))-nano Silica film has been synthesized via in situ CS sol process, and the chemical bonding and microstructure of nano silica dispersed in resin were examined by FT-IR, TAG and SEM. The dielectric properties of these hybrid films over a given temperature and frequency ranges have been studied in a point of view of stable chemical bonding of nano Silica filler. The results from IR spectra and SEM photograph indicated that PEI-Silica hybrid film prepared with nano CS sol process has been synthesized in uniform and chemical bonding. The decrease property of dielectric constant with CS content, tangent loss consistent of given frequency and temperature has been explained in terms of the chain movement of polymer through chemical bonging and size effect of nano silica. The new PEI-CS sol hybrid film with such stable chemical and dielectric properties was expected to be used as a high functional coating application in ET, IT and electric power products.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.338-350
• /
• 2010

As existing materials for ground reinforcement, chemical grout material using cementitous materials and waterglass was used. But many problems in terms of ground reinforcement effects were implicated. In this study, for development and applicability verification of new materials, viscosity, fluidity, permeability, Self-Leveling, keeping of drilled hole, antiwashout underwater, resistance of water (groundwater dilution and minimize material eluting) and the early strength and long-term strength characteristics of developed materials was confirmed, and material standards, and establishing construction standards for the various model tests were conducted. As a result, high viscosity, flowability, permeability and keeping of drilled hole characteristics are excellent, in addition to the early strength properties, dilution does nat occur to groundwater, including groundwater is available for dealing with environmental issues. Application of basic and reinforcement method by Filler function in addition to structure can also or development of a new concept can be expected. In addition, middle and large-diameter drilled shaft, micropile, ground anchors, soil-nailing, steel pipes multi-grouting reinforcement for cement injection process could be used enough to even be considered.

• Carbon letters
• /
• 제9권4호
• /
• pp.298-302
• /
• 2008

Carbon blacks could be used as the filler for the electromagnetic interference (EMI) shielding. The poly vinyl alcohol (PVA) and polyvinylidene fluoride (PVDF) were used as the matrix for the carbon black fillers. Porous carbon blacks were prepared by $CO_2$ activation. The activation was performed by treating the carbon blacks in $CO_2$ to different degrees of burnoff. During the activation, the enlargement of pore diameters, and development of microporous and mesoporous structures were introduced in the carbon blacks, resulting in an increase of extremely large specific surface areas. The porosity of carbon blacks was an increasing function of the degree of burn-off. The surface area increased from $80\;m^2/g$ to $1142\;m^2/g$ and the total pore volume increased from $0.14073\;cc{\cdot}g^{-1}$ to $0.9343\;cc{\cdot}g^{-1}$. Also, the C=O functional group characterized by aldehydes, ketones, carboxylic acids and esters was enhanced during the activation process. The EMI shielding effectiveness (SE) of raw N330 carbon blacks filled with PVA was about 1 dB and those of the activated carbon blacks increased to the values between 6 and 9 dB. The EMI SE of raw N330 carbon blacks filled with PVDF was about 7 dB and the EMI SE increased to the range from 11 to 15 dB by the activation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.157-158
• /
• 2006

A novel nanofabrication process has been developed using two-photon crosslinking (TPC) for the fabrication of three-dimensional (3D) SiCN ceramic microstructures applicable to high functional 3D devices, which can be used in harsh working environments requiring a high temperature, a resistance to chemical corrosion, as well as tribological properties. After sequential processes: TPC and pyrolysis, 3D ceramic microstructures are obtained. However, large shrinkage due to low-ceramic yield during the pyrolysis is a serious problem to be solved in the precise fabrication of 3D ceramic microstructures. In this work, silica nanoparticles were employed as a filler to reduce the amount of shrinkage. In particular, the ceramic microstructures containing 40 wt% silica nanoparticles exhibited relatively isotropic shrinkage owing to its sliding free from the substrate during pyrolysis.

• 농업과학연구
• /
• 제37권2호
• /
• pp.277-283
• /
• 2010

Research on permeable pavement like asphalt and concrete pavement with porous structure has been increasing due to environmental and functional need such as reduction of run off and flood. This study was performed to evaluate void ratio, permeability coefficient, and compressive strength of permeable polymer concrete (PPC) using crushed and recycled coarse aggregate that is obtained from waste concrete. Also, 6 mm length of polypropylene fiber was used to increase toughness and interlocking between aggregate and aggregate surrounded by binder. Binder and filler used were unsaturated polyester resin and CaCO3, respectively. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate sizes 5~10 mm. In the test results, regardless of kinds of aggregates and fiber contents, the void ratio, permeability coefficient and compressive strength of all types of PPC showed the higher than the criterion of porous concrete that is used in permeable pavement in Korea. Also, strengths of PPC with increase polypropylene fiber volume fraction showed slightly increased tendency due to increase binder with increase of fiber volume fraction. Accordingly, polypropylene fiber and recycled coarse aggregate can be used for permeable pavement.

• Membrane and Water Treatment
• /
• 제9권2호
• /
• pp.105-113
• /
• 2018

Maillard reaction products like melanoidins present in industrial fermentation wastewaters are complex compounds with various functional properties. In this work, novel ultrafiltration (UF) mixed matrix membrane (MMM) composed of polysulfone (PSF) and nanocomposites was prepared through a phase inversion process for the recovery of melanoidins. Nanocomposites were prepared with acid functionalized multiwalled carbon nanotubes (MWCNTs) as the reinforcing filler for chitosan-thermoplastic starch blend. Higher nanocomposites content in the PSF matrix reduced the membrane permeability and melanoidins retention indicating tighter membrane with surface defects. The membrane surface defects could be sealed with dilute polyvinyl alcohol (PVA) solution. The best performing membrane (1% nanocomposites in 18% PSF membrane sealed with 0.25% PVA coating) resulted in uniform melanoidins retention of 98% and permeability of 3.6 L/m2 h bar over a period of 8h. This demonstrates a low fouling PSF membrane for high melanoidins recovery.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.387-392
• /
• 2018

Various technical approaches and concepts have been proposed to develop conductive super-hydrophobic (SH) surfaces. However, most of these approaches are not usable in practical applications because of insufficient adhesion and cost issues. Additionally, durability and uniformity issues are still in need of improvement. The goal of this research is to produce a large-area conductive SH surface with improved adhesion performance and uniformity. To this end, carbon nanotubes (CNT) with a high aspect ratio and elastomeric polymer were utilized as a conductive filler and matrix, respectively, to form a coating layer. Additionally, nanoscale silica particles were utilized for stable implementation of the conductive SH surface. To improve the adhesion properties between the SH coating layer and substrate, pretreatment of the substrate was conducted by utilizing both wet and dry etching processes to create specific organic functional groups on the substrate. Following pretreatment of the surface, a zirco-aluminate coupling agent was utilized to enhance adhesion properties between the substrate and the SH coating layer. Raman spectroscopy revealed that adhesion was greatly improved by the formation of a chemical bond between the substrate and the SH coating layer at an optimal coupling agent concentration. The developed conductive SH coating attained a high electromagnetic interference (EMI) shielding effectiveness, which is advantageous in self-cleaning EMI shielding applications.