• Restorative Dentistry and Endodontics
• /
• 제28권3호
• /
• pp.209-221
• /
• 2003

The objectiveness of this study was to evaluate whether low-viscosity composite can bond effectively to dentin surface without bonding resin. The low-viscosity composites being 50wt% filler content were made by the inclusion of bonding resin of two self-etching systems(Cleafil SE Bond, Unifil Bond) varied with contents as 0, 10, 20, 30, 40, 50wt%. Exposed dentin surfaces of extracted 3rd molars are used. Dentin bond strengths were measured. The tests were carried out with a micro-shear device placed testing machine at a CHS of 1mm/min after a low-viscosity composite was filled into an iris cut from micro tygon tubing with internal diameter approximately 0.8mm and height of 1.0mm. 1 Flexural strength and modulus was increased with the addition of bonding resin. 2. Micro-shear bond strength to dentin was improved according to content of bonding resin irrespective of applying or not bonding resin in bonding procedure, and that of Clearfil SE Bond groups was higher than Unifil Bond. 3. There were no significant difference whether use of each bonding resin in bonding procedure for S-40, S-50, U-50(p＞0.05). 4. In SEM examination, resin was well infiltrated into dentin after primed with self-etching primer only for S-50 and U-50 in spite of the formation of thinner hybrid layer. Low viscosity composite including some functional monomer may be used as dentin bonding resin without an intermediary bonding agent. It makes a simplified bonding procedure and foresees the possibility of self-adhesive restorative material.

• 대한물리의학회지
• /
• 제6권3호
• /
• pp.293-301
• /
• 2011

Purpose : The purposes of this study were to investigate the age-related difference in balance ability in the elderly over 65 years and to verify the clinical usefulness of the functional reach test (FRT) for balance evaluation of the elderly through the sensory organization test (SOT). Methods : The subjects were forty-six community dwelling elderly people over 65 years old in order to verify the correlation of balance measures and to compare the balance ability. Balance was measured using the FRT and the six sub-equilibrium scores and the composite equilibrium score of the SOT. Pearson's product correlation coefficient was used to evaluate the relationships among these measurements of balance. Results : There was a significant difference in functional reach by age in the elderly (p<.01). There was a significant negative correlation between the FRT and the age of the elderly (r=-.396, p<.01). There was also significant high positive correlation between the FRT and the eye closed sway surface (EC/SS) (r=.789, p<.01), and composite equilibrium score (r=.548, p<.01) of the SOT. Conclusion : Thus, it is possible to use the FRT as a quantitative measure of balance, rather than the SOT, which is more expensive and complicated to evaluate elderly people. According to the results of this study, the use of the FRT is required clinically to objectively measure the balance of elderly people in the future.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.483-489
• /
• 2017

The loss of the sulfur cathode material through dissolution of the polysulfide into electrolyte causes a significant capacity reduction of the lithium-sulfur cell during the charge-discharge reaction, thereby debilitating the electrochemical performance of the cell. We addressed this problem by using a chemical and physical approach called reduction of polysulfide dissolution through direct coating functional inorganic (graphene oxide) or organic layer (polyethylene oxide) on electrode, since the deposition of external functional layer can chemically interact with polysulfide and physically prevent the leakage of lithium polysulfide out of the electrode. Through this approach, we obtained a composite electrode for a lithium-sulfur battery (sulfur: 60%) coated with uniform and thin external functional layers where the thin external layer was coated on the electrode by solution coating and drying by a subsequent heat treatment at low temperature (${\sim}80^{\circ}C$). The external functional layer, such as inorganic or organic layer, not only alleviates the dissolution of the polysulfide electrolyte during the charging/discharging through physical layer formation, but also makes a chemical interaction between the polysulfide and the functional layer. As-formed lithium-sulfur battery exhibits stable cycling electrochemical performance during charging and discharging at a reversible capacity of 700~1187 mAh/g at 0.1 C (1 C = 1675 mA/g) for 30 cycles or more.

• Carbon letters
• /
• 제12권3호
• /
• pp.138-142
• /
• 2011

Poly(vinyl alcohol) (PVA) composites with various graphite oxide (GO) contents (0 to 10 wt%) were prepared by sonicating the mixture of PVA and GO, followed by crosslinking with glutaraldehyde. GO was pre-treated with oxyfluorination ($O_2:F_2$ = 8:2) in order to modify the surface of GO to allow it to carry hydrophilic functional groups. PVA/GO composite hydrogels were characterized by scanning electron microscopy and Fourier-transform infrared spectrometer (FT-IR). The morphology of the PVA/GO composite hydrogels and the variations in soluble gel portion were investigated under various GO contents and UV irradiation doses. The variation in the chemical structure of photo degraded PVA/GO composite hydrogels was studied by FT-IR. The photochemical stability of PVA/GO composite hydrogels under UV irradiation was found to improve noticeably with increasing content of uniformly dispersed GO.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.34-39
• /
• 2015

The feasibility of recycling wasted printed circuit board (PCB) is investigated by preparing PCB added flame retardant composites filled with either unsaturated polyester or polyurethane. In order to improve electroconductive properties, copper powder was added into the composites, which results also in improving their antistatic properties. The prepared composite samples showed a binding between the polymer fillers observed by a scanning microscope. The sample group using unsaturated polyester is elastomeric that led to appreciable elongation and elasticity. In case of polyurethane, the tensile strength increased proportionally as increase of the amount of PCB powder. The composite materials can be utilized as antistatic composite materials, since the surface resistivity result showed increase of the electroconductive properties by adding Cu. The flammability of the samples is not satisfactory according to UL-94 vertical test. However, the flame retardant properties were improved by adding PCB power. This study, therefore, showed that it is feasible to fabricate polymer composite materials and improve the material characteristics by adding PCB powder, which can replace existing additives used for the preparation of polymer composite materials and can reduce the environment contamination by recycling the wasted PCB.

• Composites Research
• /
• 제17권4호
• /
• pp.25-31
• /
• 2004

본 연구에서는 다중세포로 구성된 타원형 단면 복합재료 블레이드의 정밀 1차원 보 해석모델을 개발하였다. 보의 정식화를 위하여 Reissner의 반보족에너지 함수를 이용하였으며, 고전적인 강성도 및 유연도법을 결합한 혼합보 이론 체계를 구축하였다. 타원단면의 특성계수들을 구하기 위해 단면의 외곽선을 유한개의 선분으로 분할하고 여기에 Gauss 적분을 수행하였다. 또한, 단면을 구성하는 각 세포에 대해 4개의 연속방정식이 충족되도록 구성하였다. 개발된 보 이론을 단일 및 이중세포로 구성된 타원형 복합재료 블레이드에 적용하였으며, 다차원 정밀 유한요소 해석 결과와 비교하여 그 타당성을 확보하였다.

• 한국식품영양학회지
• /
• 제9권4호
• /
• pp.496-499
• /
• 1996

기능성 다이어트 식품을 개발을 목적으로, 키토산 과견 피브로인의 복합체를 만들고 성질을 조사하였다. 키토산은 대동새우로부터 추출하였고, 견사 피브로인 섬유는 누에로부터 추출하였다. 견사의 특성을 알아보기 위하여 용해도를 조사한 결과, 용해도는 8M Libr 이상의 농도와 4$0^{\circ}C$ 이상에서 가장 높았다. 견사 피브로인의 아미노산 조성은 천연견사 및 용해시킨 피브로인과 같았다. 키토산, 견사 피브로인 복합체의 아미노산 조성은 glycine, alanine, serine, tyrosine, threonine 및 glutamic acid 순서로 많았다. 또한 IR 스펙트럼 결과, 키토산.견사 피브로인 복합체는 배합비율에 따른 스텍트럼상의 차이는 거의 없었다.

• Structural Engineering and Mechanics
• /
• 제77권6호
• /
• pp.753-763
• /
• 2021

Feasibility studies of a reinforced concrete (RC) deep pile foundation system with the compressed air energy storage (CAES) technology were conducted in previous studies. However, those studies showed some technical limitations in its serviceability and durability performances. To overcome such drawbacks of the conventional RC energy pile system, various steel-concrete composite pile foundations are addressed in this study to be utilized as a dual functional system for an energy storage medium and load-resistant foundation. This study conducts finite element analyses to examine the applicability of various composite energy pile foundation systems considering the combined effects of structural loading, soil boundary forces, and internal air pressures induced by the thermos-dynamic cycle of compressed air. On this basis, it was clearly confirmed that the role of inner and outer tubes is essential in terms of reliable storage tank and better constructability of pile, respectively, and the steel tubes in the composite pile foundation can also ensure improved serviceability and durability performances compared to the conventional RC pile system.

• Archives of Plastic Surgery
• /
• 제35권6호
• /
• pp.716-722
• /
• 2008

Purpose: Split or full thickness skin graft is generally used to reconstruct the palmar skin and soft tissue defect after release of burn scar flexion contracture of hand. As a way to overcome and improve aesthetic and functional problems, the authors used the preserved superficial fat skin(PSFS) composite graft for correction of burn scar contracture of hand. Methods: From December of 2001 to July of 2007, thirty patients with burn scar contracture of hand were corrected. The palmar skin and soft tissue defect after release of burn scar contracture was reconstructed with the PSFS composite graft harvested from medial foot or below lateral and medial malleolus, with a preserved superficial fat layer. To promote take of the PSFS composite graft, a foam and polyurethane film dressing was used to maintain the moisture environment and Kirschner wire was inserted for immobilization. Before and after the surgery, a range of motion was measured by graduator. Using a chromameter, skin color difference between the PSFS composite graft and surrounding normal skin was measured and compared with full thickness skin graft from groin. Results: In all cases, the PSFS composite graft was well taken without necrosis, although the graft was as big as $330mm^2$(mean $150mm^2$). Contracture of hand was completely corrected without recurrence. The PSFS composite graft showed more correlations and harmonies with surrounding normal skin and less pigmentation than full thickness skin graft. Donor site scar was also obscure. Conclusion: The PSFS composite graft should be considered as a useful option for correction of burn scar flexion contracture of hand.

• Steel and Composite Structures
• /
• 제7권3호
• /
• pp.241-251
• /
• 2007

The purpose of this study is to calculate the torsional rigidity of arbitrarily shaped composite sections on the basis of hybrid finite element approach. An analogy is used between the torsion problem and deformation of a plate which exhibits only shear behavior. In the analysis a simple hybrid finite element based on Hellinger-Reissner functional is presented and a set of numerical examples are performed to demonstrate and asses the performance of the developed element in practical applications.