Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2015.30.1.034

Preparation and Characterization of the Multi-functional Complex Utilizing PCB Powder  

Park, Byoung Ki (Industry Academic Cooperation Foundation, Hoseo University)
Publication Information
Journal of the Korean Society of Safety / v.30, no.1, 2015 , pp. 34-39 More about this Journal
Abstract
The feasibility of recycling wasted printed circuit board (PCB) is investigated by preparing PCB added flame retardant composites filled with either unsaturated polyester or polyurethane. In order to improve electroconductive properties, copper powder was added into the composites, which results also in improving their antistatic properties. The prepared composite samples showed a binding between the polymer fillers observed by a scanning microscope. The sample group using unsaturated polyester is elastomeric that led to appreciable elongation and elasticity. In case of polyurethane, the tensile strength increased proportionally as increase of the amount of PCB powder. The composite materials can be utilized as antistatic composite materials, since the surface resistivity result showed increase of the electroconductive properties by adding Cu. The flammability of the samples is not satisfactory according to UL-94 vertical test. However, the flame retardant properties were improved by adding PCB power. This study, therefore, showed that it is feasible to fabricate polymer composite materials and improve the material characteristics by adding PCB powder, which can replace existing additives used for the preparation of polymer composite materials and can reduce the environment contamination by recycling the wasted PCB.
Keywords
PCB; PCB powder; unsaturated polyester; polyurethane; flame retardant;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 J. E. Hoffmann, "Recovering Precious Metals from Electronic Scrap", JOM, Vol. 44, pp. 43-48, 1992.
2 Y. L. Elaine, "The Recovery of Metals from Electronic Scrap", JOM, Vol. 43, pp. 53-61, 1991.
3 G. Edson, "The Recovery of Metals from Electronic Scrap", Recovering and Refining of Precious Metals, Skytop, PA, Paper 10, 1980.
4 S. Koyanaka and S. Endoh, "The Recycling of Printed Wiring Board Scraps Using a shape Sorting Technique", Vol. 32, No. 6, pp. 385-391, 1995.   DOI
5 R. P. Kusy and D. T. Tunner, "Electrical Conductivity of a Polyurethane Elastomer Containing Segregated Particles of Nickel", J. Appl. Polym. Sci., Vol. 17, pp. 1631, 1973.   DOI
6 P. K. Mallick, "Fiber-reinforced Composites", Marcel Dekker, pp. 22-24, 1988.
7 J. W. Cho and D. R. Paul, "Nylon 6 nanocomposites by melt compounding", Polymer, Vol. 42, pp. 1083, 2001.   DOI
8 J. S. Jang, "The Adhesion Promotion of Glass Fiber Reinforced Composite Using Methacrylate Functional Silanes", J. Korean Ind. Eng. Chem., Vol. 1, pp. 133, 1990.
9 S. J. Park, J. S. Jun, and J. R. Lee, "Enhancement of Interfacial Adhesion of Glass Fibers-reinforced Unsaturated Polyester Matrix Composites : Effect of -methacryloxypropyltrimethoxy Silane Treatment Containing -aminopropyltriethoxy Silane", J. Korean Ind. Eng. Chem., Vo. 12, pp. 143, 2001.
10 K. Na, H. S. Park and H. Y. Won, "SALS Study on Transcrystallization and Fiber Orientation in Glass Fiber/Polypropylene Composites", Macromol. Res., Vol. 14, pp. 499, 2006.   DOI
11 I. H. Tavman and M. T. Coban, "Thermal Conductivity of Particle Filled Polyethylene Composite Materials", Compos. Sci. Technol., Vol. 63, pp. 113, 2003.   DOI
12 E. Jackson, "Hydrometallurgical Extraction and Reclamation", Ellis Horwood Series in Industrial Metals, pp. 204, 1986.
13 V. A. Ettel and B. V. Tilak, "Comprehensive Treatise of Electrochemistry, vol. 2, Plenum Press", pp. 328, 1981.
14 C. L. Mantell, "Electrochemical Engineering(4th, ed)", McGraw-Hill, pp. 198, 1960.
15 S.V. Muzumdar and L. J. Lee, "Polycarbonate-Polystyrene Block Copolymers and Their Application as Compatibilizing Agents in Polymer Blends", Polym. Eng. and Sci., Vol. 31, pp. 1547, 1991.
16 N. Dharmarajan, "Fracture toughness of Particle Filled Fiber Reinforced Polyester Composites", J. Appl. Polym. Sci., Vol. 42, pp. 601, 1991.   DOI
17 C. D. Han and D. Lee, "Analysis of the Curing Behavior of Unsaturated Polyester Resins using the Approach of Free Radical Polymerization", J. Appl. Polym.. Sci., Vol. 33, pp. 2859, 1987.   DOI