• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.2
• /
• pp.7-11
• /
• 2011

A high-speed railway system represents a typical example of large-scale multi-disciplinary system, consisting of subsystems such as rolling-stock, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Systems engineering technology development project for Korea next generation High-speed Electric Multiple Unit (HEMU) system in progress is a national large system development project that is not only a large-size and complex but also multi-disciplinary in nature. Therefore, all stakeholders must understand and share the functional and performance requirements of HEMU throughout its life-cycle phases. Also in the test and evaluation phase, all systems requirements must be verified. In 2011, the prototype train manufacturing will be completed. It will do test run on the commercial line and all systems requirements are verified until 2012. For the system verification, the test and evaluation process have to be established before the test trial run. Using a systems engineering tool, the system design database(SDD) with requirements traceability and development process management in the course of the development have to be established. This paper represents the test and evaluation process development based on the SEMP(Systems Engineering Management Plan) developed in the design stage. The test and evaluation process is refined and updated in comparison to the design stage one. The test and evaluation process consists of procedure, test and evaluation method and schedule. So through this process, it is defined that each systems requirements is verified on which test and about what time.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.590-596
• /
• 2017

We demonstrated a CNT synaptic transistor by integrating 6,6-phenyl-C61 butyric acid methyl ester(PCBM) molecules as charge storage molecules in a polyimide(PI) dielectric layer with carbon nanotubes(CNTs) for the transistor channel. Specifically, we fabricated and compared three different kinds of CNT-based synaptic transistors: a control device with $Al_2O_3/PI$, a single PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%), and a double PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%)/PI:PCBM(0.05 wt%). Statistically, essential device parameters such as Off and On currents, On/Off ratio, device yield, and long-term retention stability for the three kinds of transistor devices were extracted and compared. Notably, the double PCBM device exhibited the most excellent memory transistor behavior. Pulse response properties with postsynaptic dynamic current were also evaluated. Among all of the testing devices, double PCBM device consumed such low power for stand-by and its peak current ratio was so large that the postsynaptic current was also reliably and repeatedly generated. Postsynaptic hole currents through the CNT channel can be generated by electrons trapped in the PCBM molecules and last for a relatively short time(~ hundreds of msec). Under one certain testing configuration, the electrons trapped in the PCBM can also be preserved in a nonvolatile manner for a long-term period. Its integrated platform with extremely low stand-by power should pave a promising road toward next-generation neuromorphic systems, which would emulate the brain power of 20 W.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.37-46
• /
• 2014

This paper describes the conceptual design and development test procedure of a unmanned scaled-down personal air vehicle(PAV) with drive and flight dual mode capability. Trade studies on operational requirements led to the suggestion of a quad tilt prop platform which has nacelle tilt capability with multi rotor configuration. Motors for propeller propulsion and driving mechanism were integrated into a single nacelle, then they were implemented by nacelle tilt mechanism for conversion between the drive and the flight modes. Primary design parameters and initial specifications were confirmed through conceptual design, then functional tests were performed with the test platforms for the drive and the flight modes.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.46-51
• /
• 2004

Talon cusp is cusp-like structure that develops additionally in crown of anterior tooth. And it is one of dental anomalies. Talon cusp can cause various diagnostic, functional, aesthetic problems depending on the size and configuration of cusp. there is a tendency for caries to occur in the developmental grooves, and advanced attrition, periodontal problems, irritation the tongue and temporomandibular pain, occlusal interference and displacement of affected tooth may result. Therefore, early diagnosis and appropriate treatment of each case is important so that it minimize local problems, such as caries, periodontal diseases, and malocclusion. These cases which are in permanent and primary anterior teeth are about gradual reduction forming reparative dentine and complete reduction of talon cusp and root canal therapy which is an alternative and effective form of treatment when gradual reduction of talon cusp may not be possible.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.815-821
• /
• 2013

In this paper, application layer protocol of C12.22 node, defined by ANSI C12.22 is implemented. ANSI C12.22 defines application layer only among the OSI 7 layers and recommends using the existing protocols for the 1~4 layer to transmit the information. TCP/IP which is one of the generally used protocols has been applied for the transport and network layer protocol in this paper. ANSI C12.19 defines the parameters for the watt-hour meter, and C12.22 application layer defines the network services and data structures networking the watt-hour meter parameters at a minimum. This kind of services and data structures are used for the configuration, programming, monitoring of the networked watt-hour meter or collecting information of the watt-hour meter. A embedded board has been used to implement the C12.22 application layer and a test program for the AMI application server has been developed for the functional test.

• The Journal of Korean Physical Therapy
• /
• v.31 no.6
• /
• pp.358-362
• /
• 2019

Purpose: We investigated the difference in injury of the corticospinal tract (CST) and the spinothalamic tract (STT) in patients with putaminal hemorrhage, using diffusion tensor tractography (DTT). Methods: Thirty one consecutive patients with PH and 34 control subjects were recruited for this study. DTT scanning was performed at early stage of PH (7-63 days), and the CST and STT were reconstructed using the Functional Magnetic Resonance Imaging of Brain (FMRIB) Software Library program. Injury of the CST and STT was defined in terms of the configuration or abnormal DTT parameters was more than 2 standard deviations lower than that of normal control subjects. Results: Among 31 patients, all 31 patients (100%) had injury of the CTS, whereas 25 patients (80.6%) had injury of the STT: the incidence of CST injury was significantly higher than that of STT (p<0.05). In detail, 20 (64.5%) of 31 patients showed a discontinuation of the CST in the affected hemisphere; in contrast, 14 patients (45.2%) of 31 patients showed a discontinuation of the STT in the affected hemisphere. Regarding the FA value, 6 (19.4%) of 31 patients and 2 (6.4%) of 31 patients were found to have injury in the CST and STT, respectively. In terms of the fiber number, the same injury incidence was observed in 11 patients (35.5%) in both the CST and STT. Conclusion: The greater vulnerability of the CST appears to be ascribed to the anatomical characteristics; the CST is located anteriorly to the center of the putamen compared with the STT.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.104-112
• /
• 2005

This paper presents the technique to develop an operational flight program(OFP) of avionic system computer(ASC) which integrates the avionics control, navigation and fire control and provides informations for flight, navigation and weapon aiming missions. For the development of the OFP of ASC, two i960KB chips are used as central processing units board and standard computer interface library(SCIL) which is built in house is used. The Irvine compiler corporation(ICC) integrated development environment(IDE) and the programming language Ada95 are used for the OFP development. We designed the OFP to a computer software configuration item(CSCI) which consists of to three parts for independency of software modules. The OFP has been verified through a series of flight tests. The relevant tests also have been rigorously conducted on the OFP such as software integrated test, and ground functional test.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.1
• /
• pp.1-6
• /
• 2020

Fast service access involves keeping track of the location of mobile users, while they are moving around the mobile network for a satisfactory level of QoS (Quality of Service) in a cost-effective manner. The location databases are used to keep track of Mobile Terminals (MT) so that incoming calls can be directed to requested mobile terminals at all times. MT reporting cell system used in location management is to designate each cell in the network as a reporting cell or a non-reporting cell. Determination of an optimal number of reporting cells (or reporting cell configuration) for a given network is reporting cell planning (RCP) problem. This is a difficult combinatorial optimization problem which has an exponential complexity. We can see that a cell in a network is either a reporting cell or a non-reporting cell. Hence, for a given network with N cells, the number of possible solutions is 2^N. We propose a biogeography based optimization (BBO) for design of mobile station location management system in wireless communication network. The number and locations of reporting cells should be determined to balance the registration for location update and paging operations for search the mobile stations to minimize the cost of system. Experimental results show that our proposed BBO is a fairly effective and competitive approach with respect to solution quality for optimally designing location management system because BBO is suitable for combinatorial optimization and multi-functional problems.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.481-488
• /
• 2016

This study is about comparing the mobile user experience of Facebook and Instagram which are most often used among the recent SNSs by the people in their 30s and under. This study analyzed the user experience level after dividing the user experience factors through the Creating Pleasurable Interfaces model, and suggested the mean analysis as well as the result of Wilcoxon rank test which is a nonparametric statistics method. As a result of study, the Display information visually factor in functional factor and the configuration of the main page in convenient factor were a statistically significant difference in the mobile user experience of Facebook and Instagram. It is expected that this study may help seeking the user experience factors to be promoted preferentially in a competitive situation through the statistical comparative evaluation of the experience of two SNS users.