• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.585-598
• /
• 2017

Sports climbing requires more maximum body motion range than any other sport. This study examined what element affects the actions of sports climbers and suggest an ideal pattern archetype to maximize function based on motion. The theoretical background included abstracted elements influencing clothing design by researching the body type of sports climbers and the motion of sports climbing. Along with the characteristic of climbing wear, this study also conducted a comparative analysis of sleeve patterns for sports climbing wear and general sports jackets, abstracting comparative parts that influence sports climbing wear design. To develop the final research archetype, research was done on 107 sports climbers in their 20s-30s that selected the top 3 brands and collected patterns as well. A research archetype was selected based on 3-D virtual clothing and developed into 4 different patterns with different sleeve cap heights. Appearance evaluation and a motion functionality evaluation were then conducted in order to select a final research archetype adequate for sports climbing based on evaluation findings. In addition, this study identified aesthetical problems of the final research archetype produced based on functionality that could suggest an archetype for a climbing jacket that could be visually satisfying through appearance evaluations and motion functionality evaluations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.2
• /
• pp.254-266
• /
• 2005

The purpose of this study were to develop snow-board upper wear with improved functionality. The study consisted of figure out appropriate ease amount of snow-board upper wear and make products by applying it to pattern design. The results of this study were as follows : First, The results of examined the difference between naked body measurements of and basic wear. According to motion, chest circumference(4.7cm, 5.1%), back width(8.9cm, 20.7%), and waist back length(8.0cm, 18.3%) increased. Around the elbow the length increased by 4.4cm(21.9%) when it was bent 90 degrees, while it increased by 6.0cm(29.8%) when it was bent to the full(145 degree). Second, 3 snow-board upper wear were selected and evaluated their appearance, comforts, and functionality, and that of the biggest margin proved to be the best. Eases necessary for motion proved to be insufficient especially in neck, arm and wrist parts of upper clothing. Third, on the basis of the analysis of snow-board upper wear on market, 2 pieces of experimental snowboard upper wear were designed, produced, and evaluated the patterns of with different ease, and snowboard upper wear B for experiment was proved to be better, Fourth, Snowboard upper wear was produced and evaluated for experiment 2 by giving additional ease to specific parts. Therefore experiment 2 was presented pattern, ease, and size of snowboard upper wear for with snowboard upper wear with improved functionality.

• Journal of Fashion Business
• /
• v.24 no.4
• /
• pp.48-62
• /
• 2020

Originating in South Korea, Taekwondo has been globally popular among individuals who desire to improve their health in a unique fashion. The Taekwondo uniform, one of the essential factors within the sport, needs to possess both functionality and size suitability to support dynamic movements within Taekwondo. This study investigated the development of patterns in Taekwondo uniforms by suggesting patterns that reflect physical suitability derived from appearance tests and movement functionality tests of the uniforms. More specifically, we selected a sample uniform and conducted a dressing test, which considered both the aesthetics and the functionality of the garment. Then, we considered size suitability, which allowed us to design practical Taekwondo uniform patterns that encompassed more variation in body sizes of both men and women. The result of the dressing test was that women's uniforms typically required more factors compared to men's uniforms due to women's relatively smaller physiques. Based on this result, we revised the pattern to also encompass the minor differences in uniforms between men and women. In the end, the Taekwondo uniforms for women required more modifications than those for men.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.4 s.152
• /
• pp.582-594
• /
• 2006

The purpose of this study were to develop snow-board lower wear with improved functionality. The study consisted of figure out appropriate ease amount of snow-board lower wear and make products by applying it to pattern design. The results of this study were as follows: On the basis of the analysis of snow-board lower wear on market, 2 pieces of experimental snowboard lower wear were designed, produced, and evaluated the patterns of with different ease, and snowboard lower B for experiment was proved to be better. Snowboard lower wear was produced and evaluated for experiment 2 by giving additional ease to specific parts. Therefore experiment 2 was presented pattern, ease, and size of snowboard lower wear with improved functionality. Sizes and ease of snow-board lower wear for presentation. waist circumference - 96.0cm(l6.4cm, 17.1%); hip circumference - 127.0cm(31.3cm, 24.4%); pants length - 112.0cm(9.6cm, 8.6%); crotch length - 90.0cm(26.8cm, 36.4%); thigh circumference - 78.0cm(23.4cm, 30.0%); knee circumference - 62.0cm(24.7cm, 39.8%); turnup circumference - 62.0cm(36.0cm, 58.1%). Above mentioned sizes and ease of lower wear are medium size(M) for male.

• The Korean Journal of Pain
• /
• v.35 no.3
• /
• pp.280-290
• /
• 2022

Background: This study aimed to determine the impact of complex decongestive therapy applications on upper extremity function in breast cancer patients who developed adhesive capsulitis after lymphedema. Methods: Thirty patients who developed adhesive capsulitis due to lymphedema were divided into two groups as study (n = 15) and control (n = 15) groups. Both groups received 20 minutes of exercise five days a week for three weeks using a Biodex isokinetic dynamometer, as well as a hot pack and TENS (Transcutaneous Electrical Nerve Stimulation) treatment to the shoulder joint. The study group received 45 minutes of intensive decongestive therapy along with the adhesive capsulitis treatment. The visual analogue scale was used to assess pain, circumference, and volumetric measurements were used to assess edema, and the Arm, Shoulder, and Hand Problems Questionnaire (DASH: Disabilities of the Arm, Shoulder, and Hand) was used to assess upper extremity functionality. The shoulder range of motion was evaluated. Results: Both groups had improvements in pain (P < 0.001), shoulder joint range of motion (P < 0.001), and upper extremity functionality (P < 0.001) after the treatment. There was a significant decrease in circumference and volumetric measurements in the study group (P < 0.001). However, no differences were seen in measurements in the control group. Conclusions: The results showed that complex decongestive therapy was beneficial in reducing lymphedema in breast cancer patients who acquired adhesive capsulitis due to lymphedema. Consequently, the authors believe that supplementing conventional physiotherapy with complex decongestive therapy will benefit patients.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.694-706
• /
• 2022

This study focusses on the development of a motion-sensing smart leggings prototype with the help of a module that monitors motion using a fiber-type stretch sensor. Additionally, it acquires data on Electrocardiogram (ECG), respiration, and body temperature signals, for the development of smart clothing used in online exercise coaching and customized healthcare systems. The research process was conducted in the following order: 1) Fabrication of a fiber-type elastic strain sensor for motion monitoring, 2) Positioning and attaching the sensor, 3) Pattern development and three-dimensional (3D) design, 4) Prototyping 5) Wearability test, and 6) Expert evaluation. The 3D design method was used to develop an aesthetic design, and for sensing accurate signal acquisition functions, wearability tests, and expert evaluation. As a result, first, the selection or manufacturing of an appropriate sensor for the function is of utmost importance. Second, the selection and attachment method of a location that can maximize the function of the sensor without interfering with any activity should be studied. Third, the signal line selection and connection method should be considered, and fourth, the aesthetic design should be reflected along with functional verification. In addition, the selection of an appropriate material is important, and tests for washability and durability must be made. This study presented a manufacturing method to improve the functionality and design of smart clothing, through the process of developing a prototype of motion-sensing smart leggings.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1313-1320
• /
• 2023

This paper presents the development of a smart mirror that allows control of its display through glove gestures and integrates voice recognition functionality. The hardware configuration of the smart mirror consists of an LCD monitor combined with an acrylic panel, onto which a semi-mirror film with a reflectance of 37% and transmittance of 36% is attached, enabling it to function as both a mirror and a display. The proposed smart mirror eliminates the need for users to physically touch the mirror or operate a keyboard, as it implements gesture control through glove gesture sensors. Additionally, it incorporates voice recognition capabilities and integrates Google Assistant to display results on the screen corresponding to voice commands issued by the user.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.171-179
• /
• 2002

It is well known that the geometry of the articular surface plays a major role in the kinematic and kinetic analysis to understand human knee joint function during motion. The functionality of the knee joint cannot be accurately modeled without considering the effects of sliding and lolling motions. We Present a 3-D human knee joint model considering sliding and rotting motion and major ligaments. We employ more realistic articular geometry using two cam profiles obtained from the extrusion of the sagittal Plain view of the representative Computerized Tomography image of the knee joint compared to the previously reported model. Our model shows good agreement with the already reported experimental results on Prediction of the lines of force through the human joint during gait. The contact point between femur and tibia moves toward the Posterior direction as the knee undergoes flexion, reflecting the coupling of anterior and Posterior motion with flexion/extension. The anterior/posterior displacement of the contact Point on the tibia plateau during one gait cycle is about 16 mm. for the lateral condyle and 25 mm. for the medial condyle using the employed model Also. the femur motion on the tibia undergoes lateral/medial movement about 7 mm. and 10 mm. during one gait cycle for the lateral condyle and medial condyle. respectively. The developed computational model maybe Potentially employed to identify the joint degeneration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.2
• /
• pp.143-153
• /
• 2006

Temporomandibular joint(TMJ) ankylosis is characterized by the formation of bony or fibrous mass, which replaces the normal articulation. Ankylotic block formation causes reduction of mandibular mobility, particularly hindering mouth opening, due to a mechanical block of the condylar head in its roto-transfatory motion. Surgery in TMJ ankylosis treatment entails complete ankylotic block removal and subsequent arthroplasty, possibly with autologous tissue between articular surfaces or heterologous material to restore the anatomic structure and normal function. Temporalis myofascial flap holds great promise for the reconstruction of various maxillofacial defects. In more recent years, a pedicled temporalis myofascial flap has been advocated in TMJ ankylosis surgery. Advantages of the temporalis myofascial flap in TMJ reconstruction include close proximity to the TMJ, adequate blood supply from the internal maxillary artery, and its attachment to the coronoid process, which provides movement of the flap during function, simulating physiologic action of the disc. This study evaluated 8 patients(11 TMJs) affected by TMJ ankylosis. All patients underwent surgical treatment of the removal of the ankylotic block and subsequent interpositional arthroplasty with temporalis myofascial flap. Bilateral TMJ ankylosis was observed in 3 patients(6 TMJs), right-sides in 3 patients, left-sided in 2 patients. Epipathogenesis was traumatic in 6 patients(8 TMJs), ankylosing spondylitis in 2 patients(3 TMJs). In 3 patients coronoidotomy was underwent. Average follow-up was 16.8 months after surgery, with a range of 7 to 28 months. No patients underwent additional TMJ procedures after the temporalis myofascial flap. All patients showed a distinctive improvement both in articular functionality and symptoms. We found that temporalis myofascial flap is very valuable in reconstruction of TMJ ankylosis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.395-407
• /
• 2008

As global interest in clothing spreads over the smart clothing which arouses high added-value in the apparel industry, this study is to develop a smart jacket with an electrically-vibrating device maintaining excellent appearance and comfort. The vibrating device has a massage function that could relieve muscle pain near shoulders and neck. The purposes of this research are to develop jacket pattern for men in their thirties considering body shapes and fashion trend, to develop a wearable device that is composed of motor and controller and integrate it into a jacket, and to assess the external appearance and functional satisfaction of the smart jacket through the wearing test. The results are as follows: 1. In order to develope an appropriate jacket pattern for men in their thirties, several patterns were assessed for their fitting comfort. The final pattern was completed after making alterations some parts, and showed high satisfaction as 3.6(on a five-point scale) in all categories. 2. A vibrating device was developed by connecting motor, controller, battery and switch. Developing this device, focus was maximizing the strength of motor and minimizing the heat generated from motor and controller. Snaps were placed between inner and outer cloth of jacket so that the vibrating device could be easily attachable and detachable. The motor was located around Trapezius where muscles often get stiff. A switch was designed to be used in selecting the modes of Strong, Weak, and Cross Tapping. 3. The wearing test was conducted to examine outer appearance, comfort for motion, and functionality of the smart jacket. The results of assessing outer appearance showed that the location for attaching the vibrating device was not noticeable but looked natural, and there is almost no change in outer appearance when the vibrating device operates. The result of assessing comfort of action revealed that wearer's satisfaction was high in all categories about activity, wearer's comfort, etc. The result also showed that wear's satisfaction for effects of vibrating massage, easiness in using the device, heat generation was not less than 3.5 in all categories except a category about noise.