• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.130-135
• /
• 2017

In this paper, we propose an interface for interactive sound experience in the virtual concert hall. The proposed interface consists of two systems, called 'virtual acoustic position' and 'virtual active listening'. To provide these systems, we applied an artificial reverberation algorithm, multi-channel source separation and head-related transfer function. The proposed interface was implemented by using Unity. The interface provides the virtual concert hall to user through Oculus Rift, one of the virtual reality headsets. Moreover, we used Leap Motion as a control device to allow a user experience the system with free-hand. And user can experience the sound of the system through headphones.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.3
• /
• pp.250-257
• /
• 2017

It is desirable to have a way to predict the pressure drag due to various appendages attached to stern. As a mathematical model for these, a sphere and a singularity behind it, both in the uniform flow can be considered. We may use the Butler's sphere theorem to find the Stokes' stream function when the resulting flow is axisymmetric, and then the extended Lagally's theorem to get the force upon the sphere due to the singularity. Assuming the separation distance between the sphere and the singularity is small, the leading order approximation for the force is obtained and it is found out that if the separation distance and the square root of the strength of the dipole are of the same order, the effect of the image of the dipole with respect to the sphere is the most important.

• YAKHAK HOEJI
• /
• v.59 no.3
• /
• pp.113-119
• /
• 2015

Protein phosphorylation is one of most important post-translational modifications (PTMs) and plays an important role in regulation of protein function. Here we develop a method for a global identification of phosphopeptides and phosphorylation sites using nano-LC MS/MS. We compared two separation methods, C4 and strong cation ion exchange (SCX). Before phosphopeptides enrichment with $TiO_2$, total proteins from Rat 1 cells have been separated using C4 column or tryptic peptides of proteins from the cells have been separated using SCX column. Finally, we have detected 52 phosphorylation sites on 41 proteins from SCX method and 375 phosphorylation sites on 252 proteins from C4 method, and determined the function and localization of identified phosphoproteins using DAVID software. In particular, we showed new phosphorylation sites from membrane proteins related to various cell signaling mechanisms. This method may contribute to study global signal networks induced by various signals including ligands and drugs.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.93-101
• /
• 2020

Recently, as a BIM-based construction simulation system, 4D CAD tools using virtual reality (VR) objects are being applied in construction project. In such a system, since the expression of the object is based on VR image, it has a sense of separation from the real environment, thus limiting the use of field engineers. For this reason, there are increasing cases of applying augmented reality (AR) technology to reduce the sense of separation from the field and express realistic VR objects. This study attempts to develop a methodology and BIM module for the pre-construction verification system using AR technology to increase the practical utility of VR-based BIM objects. To this end, authors develop an AR-based drawing verification function and drawing object-based 4D model augmentation function that can increase the practical utility of 2D drawings, and verify the applicability of the system by performing case analysis. Since VR object-based image has a problem of low realism to field engineers, the linking technology between AR object and 4D model is expected to contribute to the expansion of the use of 4D CADsystem in the construction project.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.8
• /
• pp.456-461
• /
• 2017

In this study, nano fibers with various physical properties were materialized by using a variety of polymers [PAN (Polyacrylonitrile), PU (Polyuretane), PSU (Polysulfone)] which are raw materials of dope solution manufactured for electrospinning and solvents [NMP (N-methyl-2 pyrrolidone), DMF (Dimethylformamide)] and evaluated characteristics of their flux and SS (Suspended Solids) separation and then ascertained application of manufactured fibers as separation membrane for water treatment. In this study, analysis of surface of manufactured material was carried out through SEM analysis to ascertain the cause of flux and SS separation performance by checking diameter, uniformity and straightness of fiber. If additive is used in manufacturing nano fiber water treatment separation membrane, it is expected to solve problems such as membrane fouling and mechanical strength and to be used as basic factor for manufacturing separation membrane with catalyst function added.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.80-85
• /
• 2014

Side jet thruster using nozzle closure separation device provides a solid rocket with a trajectory shift function. Side jet thruster consists of low combustion temperature propellant, neutral type propellant grain and nozzle closure separation device. If a trajectory shift is required, side jet thrust is generated on the rocket by separating some nozzle closures located in the opposite direction to thrust. After completing trajectory shift, the other nozzle closures located in the thrust direction are separated to cease side jet thrust. The operation process is verified through ground static test. The result in this study can be applied to changing rocket trajectory by controlling side jet thrust through nozzle closure separation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.824-831
• /
• 2008

We present a continuous size-dependent particle separator using a negative dielectrophoretic (DEP) virtual pillar array. Two major problems in the previous size-dependent particle separators include the particle clogging in the mechanical sieving structures and the fixed range of separable particle sizes. The present particle separator uses the virtual pillar array generated by negative DEP force instead of the mechanical pillar array, thus eliminating the clogging problems. It is also possible to adjust the size of separable particles since the size of virtual pillars is a function of a particle diameter and applied voltage. At an applied voltage of 500 kHz $10\;V_{rms}$ (root mean sqaure voltage) sinusidal wave and a flow rate of $0.40\;{\mu}l\;min^{-1}$, we separate $5.7\;{\mu}m$-, $8.0\;{\mu}m$-, $10.5\;{\mu}m$-, and $11.9\;{\mu}m$-diameter polystyrene (PS) beads with separation purity of 95%, 92%, 50%, and 63%, respectively. The $10.5\;{\mu}m$- and $11.9\;{\mu}m$-diameter PS beads have relatively low separation purity of 50% and 63%. However, at an applied voltage of $8\;V_{rms}$, we separate $11.9\;{\mu}m$-diameter PS beads with separation purity over 99%. Therefore, the present particle separator achieves clog-free size-dependent particle separation, which is capable of size tuning of separable particles.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.54-61
• /
• 2005

In 2006, the coal usage that is used as energy source of power plant will meet 16,000 MW which is 30% of the whole energy usage. A Coal deposits among the fossil fuels is very plentiful in natural resources and has high economical efficiency but application technique is very inconvenient. Also when burned for utilization, it generate various toxic and untoxic air pollution materials; fly ash, bottom ash, sulfurous acid gas etc. In this study, we could establish a preparation of clean coal by triboelectrostatic separation. In this study, we made a bench-scale's triboelectrostatic separation equipment using electrostatic technology, and got an optimum conditions of various factors for increasing recovery rate and purification in separation. A test result, we got a clean coal that recovery rate is 68.10%, rejection rate of ash and sulfur content is 31.23% and 28.33%.

• Journal of Technologic Dentistry
• /
• v.20 no.1
• /
• pp.61-89
• /
• 1998

Having taken as cause of dental technicians separation from their service a variety of individual idiosyncrasies, function-related factors, external environment factors, functional satisfaction, organizational commitment, and intention to remain, the present study conducted a mail questionnaire poll and interviews on those dental technicians who are mow in the service with private dental technical workshops and dental technical workshops in general hospitals and private dental clinics. The resultant findings from analysis of the repondent's general characteristics of cause of separation form service were revealed, as follows : 1) It was shown that the higher the academic career, the considerably higher cause of position commitment among causes of individual idio-syncrasies, reflecting a statistically significant result(P<0.05) 2) The less the number of working hours as viewed from the average number of working hours per day, the higher the positive emotion, reflecting a significant relation(P<0.01) 3) Causes from performing duties among function-related causes diclosed a statistically significant relation among marital status, career, monthly income, and positions(P<0.01) 4) Causes from wages showed a statistically significant relation in the average number of working hours per day(P<0.01), monthly income(P,0.05), and positions(P<0.05) 5) Causes from supervision exposed a significant relation in workplaces(P<0.01) 6) Causes from promotion represented a significant relation in positions(P<0.001) 7) Causes from opportunnities for taking a job as seen from external environment causes also disclosed a statistically significant relation in workplaces(P<0.05) 8) Reponsibility for family sustenace reflected a statistically significant relation in sex, age, marital status, career, monthly income, work fields, term of employment, positions, and experience of separation(P<0.001) 9) Functional satisfaction showed a statistically significant relation in marital status, career, monthly income, and the average number of hours a day(P<0.05) 10) Oraganizational commitment disclosed a statistically significant relation in work experience, monthly income, term of employment, positions(P<0.05) and the average number of working hours a day(P<0.001) 11) The intention to remain indicated a statistically significant relation in age, marital status, work experience, monthly income, positions(P<0.001) and term of employment. the average number of working hours a day(P<0.01), and in the performing work field(P<0.05)

• Journal of The Korean Astronomical Society
• /
• v.29 no.2
• /
• pp.119-136
• /
• 1996

To examine the effect of neighboring galaxies on the gravitational lensing statistics, we performed numerical simulations of lensing by many galaxies. The models consist of a galaxy in the rich cluster like Coma, or a galaxy surrounded by field galaxies in $\Omega_0 = 1$ universe with $\Omega_{gal} = 0.1,\;\Omega_{gal} = 0.3\;or\;\Omega_{gal}=1.0\;,\;where\;\Omega_{gal}$ is the total mass in galaxies. Field galaxies either have the same mass or follow Schechter luminosity function and luminosity-velocity relation. Each lensing galaxy is assumed to be singular isothermal sphere (SIS) with finite cutoff radius. In most simulations, the lensing is mainly due to the single galaxy. But in $\Omega_{gal} = 3$ universe, one out of five simulations have 'collective lensing' event in which more than two galaxies collectively produce multiple images. These cases cannot be incorporated into the simple 'standard' lensing statistics calculations. In cases where 'collective lensing' does not occur, distribution of image separation changes from delta function to bimodal distribution due to shear induced by the surrounding galaxies. The amount of spread in the distribution is from a few $\%\;up\;to\;50\%$ of the mean image separation in case when the galaxy is in the Coma-like cluster or when the galaxy is in the field with $\Omega_{gal} = 0.1\;or\;\Omega_{gal}=0.3.$ The mean of the image separation changes less than $5\%$ compared with a single lens case. Cross section for multiple image lensing turns out to be relatively insensitive to the presence of the neighboring galaxies, changing less than $5\%$ for Coma-like cluster and $\Omega_{gal}=0.1,\;0.3$ universe cases. So we conclude that Coma-like cluster or field galaxies whose total mass density $\Omega_{gal}<0.3$ do not significantly affect the probability of multiple image lensing if we exclude the 'collective lensing' cases. However, the distribution of the image separations can be significantly affected especially if the 'collective lensing' cases are included. Therefore, the effects of surrounding galaxies may not be negligible when statistics of lensing is used to deduce the cosmological informations.