• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.4
• /
• pp.529-536
• /
• 2018

Objective: Fresh sugarcane has been a new roughage source for ruminant's in semiarid regions, a function of the decline of sugar and alcohol industry in recent years. However, there is little data published regarding lambs fed sugarcane associated with spineless cactus. This study evaluated the effect of sugarcane replacement with spineless cactus (0%, 33%, 66%, and 100%) in the diet of Santa $In\hat{e}s$ lambs on carcass characteristics. Methods: Thirty-six non-castrated Santa Ines lambs at four months of age and an initial body weight of $22{\pm}2.3kg$ were assigned in a randomized block design and slaughtered after 70 days of confinement. The effects of spineless cactus as a replacement for sugarcane in the diet of the lambs on the carcass characteristics, commercial cut weight and yield, leg tissue composition, and carcass measurements were studied. Results: The study revealed quadratic behavior in slaughter body weight, and hot and cold carcass weight, with maximum values of 38.60, 18.60, and 18.11 kg and replacement levels of 40.18%, 44.42%, and 43.14%, respectively. The cold carcass yield presented an increasing linear behavior. The compactness index of carcass and leg presented a quadratic effect, with estimated maximal values of 0.28 and 0.57 kg/cm and replacement levels of 43.37% and 45.5%, respectively. The weights of commercial cuts of leg, loin, shoulder, and breast showed quadratic behavior, with maximum values of 2.79, 0.852, 1.46, and 1.30 kg and replacement levels of 49.5, 45.32, 39.0, and 40.7, respectively. For tissue composition, quadratic behavior was verified for leg weight, subcutaneous fat, and total fat. Conclusion: The replacement of sugarcane by spineless cactus at level 44% is recommended for finishing lambs considering that this level improved most of the carcass characteristics, weights, and yields of commercial cuts and leg tissue composition.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5867-5872
• /
• 2014

Background: Cervical cancer is listed as one of high-incidence endemic diseases in Xinjiang. Our study aimed to evaluate the expression of TLR9 in uterine cervical tissues of Uyghur women and examine associations with clinicopathological variables. We further characterized the direct effects of TLR9 upon the selective silencing of human papillomavirus (HPV) E6 and E7 oncoprotein expression in HPV 16-positive human cervical carcinoma cells treated with siRNA in vitro. Materials and Methods: Immunohistochemistry was applied to evaluate TLR9 expression in 97 formalin-fixed paraffin-embedded cervical samples from Uyghur women; 32 diagnosed with cervical squamous cell carcinomas (CSCC), 14 with low-grade cervical intraepithelial neoplasias (CINI), 10 medium-grade (CINII), 24 high-grade (CINIII), and 17 chronic cervicitis. $BLOCK-iT^{TM}$ U6 RNAi Entry Vector $pENTR^{TM}$/U6-E6 and E7 was constructed and transfected the entry clone directly into the mammalian cell line 293FT. Then the HPV 16-positive SiHa human cervical carcinoma cell line was infected with RNAi recombinant lentivirus. RT-PCR and Western blotting were used to determine the expression of TLR9 in both SiHa and HPV 16 E6 and E7 silenced SiHa cells. Results: Immunohistochemical staining showed that TLR9 expression was undetectable (88.2%) or weak (11.8%) in chronic cervicitis tissues. However, variable staining was observed in the basal layer of all normal endocervical glands. TLR9 expression, which was mainly observed as cytoplasmic staining, gradually increased in accordance with the histopathological grade in the following order: chronic cervicitis (2/17, 11.8%)

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.503-510
• /
• 2006

Readout circuit is to convert signal occurred in a defector into suitable signal for image signal processing. In general, it has to possess functions of impedance matching with perception element, amplification, noise reduction and cell selection. It also should satisfies conditions of low-power, low-noise, linearity, uniformity, dynamic range, excellent frequency-response characteristic, and so on. The technical issues in developing image processing equipment for focal plane way (FPA) can be categorized as follow: First, ultraviolet (UV) my detector material and fine processing technology. Second, ReadOut IC (ROIC) design technology to process electric signal from detector. Last, package technology for hybrid bonding between detector and ROIC. ROIC enables intelligence and multi-function of image equipment. It is a core component for high value added commercialization ultimately. Especially, in development of high-resolution image equipment ROIC, it is necessary that high-integrated and low-power circuit design technology satisfied with design specifications such as detector characteristic, signal dynamic range, readout rate, noise characteristic, ceil pitch, power consumption and so on. In this paper, we implemented a $8\times8$ FPA prototype ROIC for reduction of period and cost. We tested unit block and overall functions of designed $8\times8$ FPA ROIC. Also, we manufactured ROIC control and image boards, and then were able to verify operation of ROIC by confirming detected image from PC's monitor through UART(Universal Asynchronous Receiver Transmitter) communication.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.427-439
• /
• 2008

This paper proposes a novel method to convert monoscopic soccer videos to stereoscopic videos. Through the soccer video analysis process, we detect shot boundaries and classify soccer frames into long shot or non-long shot. In the long shot case, the depth mapis generated relying on the size of the extracted ground region. For the non-long shot case, the shot is further partitioned into three types by considering the number of ground blocks and skin blocks which is obtained by a simple skin-color detection method. Then three different depth assignment methods are applied to each non-long shot types: 1) Depth estimation by object region extraction, 2) Foreground estimation by using the skin block and depth value computation by Gaussian function, and 3)the depth map generation for shots not containing the skin blocks. This depth assignment is followed by stereoscopic image generation. Subjective evaluation comparing generated depth maps and corresponding stereoscopic images indicate that the proposed algorithm can yield the sense of depth from a single view images.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.271-282
• /
• 2013

Recently, ITU-T/VCEG and ISO/IEC MPEG have started a new joint standardization activity on video coding, called High Efficiency Video Coding (HEVC). This new standard gives significant improvement in terms of picture quality for high resolution video. The main challenge in this upcoming standard is the time complexity. In this paper we have focused on CU splitting algorithm. We have proposed a novel algorithm which can terminate the CU splitting process early based on the RD cost of the parent and current level and the motion vector value of the current CU. Experimental result shows that our proposed algorithm gives on average more than about 10% decrement in time over ECU [8] with on average 1.78% of BD loss on the original.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.913-916
• /
• 2020

In this paper, we propose the development of nitrogen cooling equipment for personalized local area. The proposed equipment consists of a cold air supply module, a body, and nitrogen injection with the following characteristics. First, it automatically controls the amount and time of cold air supply by utilizing information measuring skin temperature with volumetric temperature sensors, so it can have a competitive edge in function by ensuring complete safety. Second, if the distance measuring sensor is applied to the skin for more than a certain distance, it can block the cold air or control the discharge of nitrogen in conjunction with the control GUI to improve the efficiency of higher cooling therapy while providing safe management. Third, by installing a control module that can control the supply of nitrogen, the cost of maintenance can be minimized by minimizing the loss of nitrogen. Experiments at an external testing agency to evaluate the performance of the proposed equipment showed that the accuracy of the temperature sensor was measured in the range of ±3.8%, which is lower than the world's highest level(±5%), with a range of 110℃ to -160℃ similar to the world's highest level. Distance accuracy was measured in the range of ±3.0%, lower than the world's highest level(±5%), and weight accuracy in the range of ±0.1%, lower than the world's highest level(±5%). In addition, emission control was measured in four stages, higher than the world's highest level(stage 1) and nitrogen use was measured at 0.8L/min below the world's highest(6L/min). Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• Journal of KIISE:Databases
• /
• v.34 no.2
• /
• pp.133-140
• /
• 2007

Flash memory has penetrated our life in various forms. For example, flash memory is important storage component of ubiquitous computing or mobile products such as cell phone, MP3 player, PDA, and portable storage kits. Behind of the wide acceptance as memory is many advantages of flash memory: for instances, low power consumption, nonvolatile, stability and portability. In addition to mentioned strengths, the recent development of gigabyte range capacity flash memory makes a careful prediction that the flash memory might replace some of storage area dominated by hard disks. In order to have overwriting function, one block must be erased before overwriting is performed. This difference results in the cost of reading, writing and erasing in flash memory[1][5][6]. Since this difference has not been considered in traditional buffer replacement technologies adopted in system software such as OS and DBMS, a new buffer replacement strategy becomes necessary. In this paper, a new buffer replacement strategy, reflecting difference I/O cost and applicable to flash memory, suggest and compares with other buffer replacement strategies using workloads as Zipfian distribution and real data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.118-125
• /
• 2017

In this study, we examined the bond performance of FRP Hybrid Bars. FRP Hybrid Bars are developed by wrapping glass fibers on the outside of deformed steel rebars to solve the corrosion problem. The surface of the FRP Hybrid Bars was coated with resin and silica sand to enhance its adhesion bonding performance with concrete. Various parameters, such as the resin type, viscosity, and size of the silica sand, were selected in order to find the optimal surface condition of the FRP Hybrid Bars. For the bonding test, FRP Hybrid Bars were embedded in a concrete block with a size of 200 mm3 and the maximum load and slip were measured at the interface between the FRP Hybrid Bar and concrete through the pull-out test. From the experimental results, the maximum load and bond strength were calculated as a function of each experimental variable and the resin type, viscosity and size of the silica sand giving rise to the optimal bond performance were evaluated. The maximum bond strength of the specimen using epoxy resin and No. 5 silica sand was about 35% higher than that of the deformed rebar.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.4
• /
• pp.722-729
• /
• 2004

Leptin is an adipocyte-secreted hormone and its plasma levels correlate with total body fat mass, however, it also plays a regulatory role in immunity, inflammation, and hematopoiesis. Chemokine is known as a chemoattractant cytokine in inflammatory reaction, but its role in leptin reaction has not been well studied. In this study, the direct effect of leptin on the expression of chemokine mRNAs and lipopolysaccharide (LPS)-induced chemokine KC mRNA in mouse peritoneal macrophages was investigated. Leptin did not induce the expression of lymphotactin, RANTES, eotaxin, MIP-1$\beta$, MIP-1$\alpha$, MIP-2, MCP-1, IP-10, TCA-3, and KC mRNA in mouse peritoneal macrophages, and had no direct effect on the expression of these LPS-induced chemokine mRNAs except KC mRNA. The synergistic effect of leptin on the expression of LPS-induced KC mRNA occurred late in the time course of response to LPS. The increased expressions of Ob-Rb mRNA and leptin receptor protein were detected during the LPS treatment. Leptin produced a substantial increase in the stability of the LPS-induced KC mRNA, and the synergistic effect of leptin on LPS-induced KC mRNA expression was further augmented by cycloheximide (CHX). Pyrrolidine dithiocarbamate (PDTC) did not block the synergistic effect of leptin on LPS-induced KC mRNA expression in mouse peritoneal macrophages. These data suggest that although leptin has no direct effect on the expression of lymphotactin, RANTES, eotaxin, MIP-1$\beta$, MIP-1$\alpha$, MIP-2, MCP-1, IP-10, TCA-3, and KC mRNA in mouse peritoneal macrophages, the synergistic effect of leptin on the expression of LPS-induced KC mRNA has the possibility that LPS might induce the expression of the Ob-Rb receptor or an unknown gene(s) that sensitizes macrophages to the synergistic function of leptin. Therefore, further studies are necessary to examine leptin as a regulatory factor of chemokine production.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.1
• /
• pp.62-70
• /
• 1985

The purpose of this study is to investigate the basic data such the total, the daily maximum, and the peak stage of consumptive use of water and also the soil moisture extraction pattern for irrigation plan of tobacco during the growing period. The plots at which this study was conducted are divided into three fertilization levels of 30g, 60g, and 90g. Each block for three levels is divided as vinyl mulching and irrigation plot, vinyl mulching and nonirrigation plot, and nonmulching and irrigation plot. The results obtained are summarized as follows: 1. The evapotranspiration amount of mulching-irrigation plots are similar to that of mulching-nonirrigation plots. While, the evapotranspiration amount of mulching plots are different obviousely from that of nonmulching plots. Therefore, a significance was recognized between the mulching plots and the nonmulching plots. 2. The amount of evapotranspiration in case of 60g and 90g fertilization level was larger than that of 30g. But the 60g plots and the 90g plots showed little differences. 3. In the total amount of evapotranspiration for each of the experimental plots during the growing period, nonmulching-irrigation plot showed the largest value of 332.9mm, second the mulching-irrigation plot, 284. 9mm, and the mulching-nonirrigation plot, the smallest as 255. 9mm. 4. In the monthly average amount of evapotranspiration for each of the treatment plots, the mulching-irrigation the mulching-nonirrigation, and the nonmulching-irrigation plot showed 3. 6mm, 3. 2mm and 4. 2mm respectively. The daily maximum amount of evapotranspiration showed 5. 1mm, 4. 5mm, and 6.4mm for the mulching-irrigation, the mulching-nonirrigationl, and the nonmulching-irrigation plot respectively. 5. It was confirmed that the higher correlationship exists between the weight of dried leaves and the amount of evapotranspiration, and between the weight of dried leaves and the coefficient of evapotranspiration with the function of logarithms. The coefficient of evapotranspiration have a tendency to increase in proportion to the leaf area index. 6. The maximum coefficient of evapotranspration and the largest leaf area index showed 1. 45 and 5.5 respectively. The stage appeared maximum values was assumed to be before and after flowering. 7. The soil moisture extraction pattern has changed by the depth of root zone for the tobacco's growing. The soil moisture extraction influenced on the 20cm depth of soil after 15 days passed, the 30cm depth after 25 days passed and the whole root zone after 45 days passed from planting. It was shown in the only mulching-irrigation plot after S5days passed from planting that the rate of soil moisture extraction of 20cm layer was larger than that of 10cm layer.