• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.33-34
• /
• 2013

Recently, as the policy of state that it is the low carbon green growth is promoted, the effort for reducing the CO₂ gas generation ejected from the construction industry in the cement production is continued. That is, the method using the mineral admixtures including the silica fume and red mud, silica fume and etc. it is the industrial byproduct with the method solving the exhaustion problem of the environmental contamination settlement and natural resources, the great quantity as the cement substitute material is examined. Accordingly, in this research, the strength characteristic of the curing body differentiating the curing method of the ternary system inorganic binder using the blast furnace slag and red mud, silica fume and etc. as the cement substitute material tried to be examined.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.153-162
• /
• 2001

This paper presents the fundamental study on rational manufacture of Ultra High Strength(VHS) concrete using industrial by-products as like silica fume, slag and fly ash. In this study, we had tested various mixing cases to manufacture the UHS concrete(target compressive strength : over $1,000kgf/cm^2$) which is easily workable (target slump flow : $60{\pm}10cm$). The main variables are studied: 1) to find the optimum replacement ratio of mineral admixture. 2) to find a rational water-binder ratio and a proper binder content. 3) to find the method for reduction of slump loss. From the test results, it is concluded that the rational mix design can be made by using 40% slag, 10% silica fume. We found that compressive strength of UHS concrete increases according to decreasing W/B ratio but in W/B ratio 18~20%, the difference is vague and the compressive strength does not necessarily increase according to increasing binder content over 700kg.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2003년도 추계학술대회
• /
• pp.126-126
• /
• 2003

Welding fume (WF) induces pulmonary disease including pneumoconiosis. To investigate whether reactive oxygen species-induced oxidative DNA damage occurs during welding fume exposure and the upregulation of DNA repair mechanisms is accompanied, SPF SD rats were exposed to welding fumes with the concentrations of 65.6${\pm}$2.9 mg/㎥(low dose) and 116.8${\pm}$3.9 mg/㎥ (high dose) of total suspended particulate for 2 hrs per day in an inhalation chamber for a total of 2hrs, 15 or 30 days.(omitted)

• 한국방재학회 논문집
• /
• 제9권3호
• /
• pp.41-47
• /
• 2009

포스트텐션 콘크리트 포장(post-tensioned concrete pavement ; PTCP)은 초장스팬 콘크리트 포장(l=120 m)을 구현하고 장기공용성(40년 이상)을 확보하기 위해 개발되었다. 본 논문에서는 PTCP공법의 장점을 효율적으로 활용하기 위하여 고내구성 콘크리트 재료개발에 대한 연구를 수행하였다. 첫째로, 알칼리 골재반응을 억제할 수 있도록 플라이 애시를 20% 치환(단위바인더량대비)하고, 둘째로, 조기강도확보 및 투수저항성을 개선하기 위하여 실리카흄을 적용하였다. 삼성분계 콘크리트의 역학적 특성, 투수저항성 및 표면박리저항성을 평가한 결과, 실리카흄 첨가에 따라 조기강도가 현저히 개선되고, 투수저항성이 "Low"에서 "Very Low" 등급으로 개선되는(ASTM C 1202 기준) 것으로 나타났다. 그러나 실리카흄 첨가량이 증가함에 따라 표면박리저항성이 저하되므로, 내구성을 고려한 현장 적용성을 확보하기 위해서는 단위바인더량 대비 5%이하로 첨가되는 것이 바람직한것으로 나타났다. 공극구조 분석결과, 개선배합에서 간격계수(spacing factor)가 $250\pm15\mu m$로 평가되어 내구성 지수가 향상된 것으로 나타났다.

• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.43-52
• /
• 2007

This study was designed to investigate the difference of airborne lead concentration by type of lead industries and type of lead exposure and to evaluate their association with lead biomarkers of lead workers in 11 lead using industries. Total of 182 lead workers (male: 167, female: 15) from 11 lead industries were participated for this study from March, 2004 to August, 2005. Airborne lead concentration were measured by representative personal sampling of workers in each unit workplace and applied same concentration value to the workers in the same unit workplace who did not measure their airborne lead with personal air sampling. Tibia lead, blood lead, zinc protoporphyrin in whole blood, ${\delta}$-aminolevulinic acid in urine, hemoglobin and hematocrit were selected as study variables of indices of lead exposure. Information about type of lead exposure (fume or non-fume other), age, work duration, smoking & drinking habit were also collected. Significant differences were seen in the means of zinc protoporphyrin, blood lead and tibia lead in lead workers by different airborne lead concentration in workplace. While blood lead and tibia lead in lead workers were significantly higher in secondary smelting than other types of lead industries, zinc protoporphyrin, ${\delta}$-aminolevulinic acid in urine and airborne lead concentration were significantly higher in litharge manufacturing. While the mean blood lead was significantly higher in the lead workers working in fume type unit workplace than those of non-fume lead workers, the mean airborne lead concentration of fume workers was significantly lower than non-fume lead workers. In the multiple regression analysis of airborne lead concentration and the type of lead exposure on tibia lead and lead exposure indices after adjustment of related covariates, airborne lead concentration was statistically significantly associated with blood lead and tibia lead, but the type of lead exposure was only associated with blood lead. To verify the causal association of airborne lead concentration on blood lead and tibia lead, further studies are needed.

• 한국도로학회논문집
• /
• 제7권3호
• /
• pp.31-42
• /
• 2005

본 연구는 도로용 포장재로서 포러스콘크리트의 실질적인 현장적용을 위한 자료제시와 성능향상 방안을 도출하기 위하여 실리카퓸과 강섬유 혼입률에 따른 포장용 포러스콘크리트의 물리 역학적 특성, 내구성 및 흡음특성을 평가하였다. 시험결과, 모든 시험조건에서 포장용 포러스콘크리트의 공극률과 투수계수는 국내외 기준치 및 제안값을 만족시키는 것으로 나타났고, 강도특성의 경우 압축강도는 대한주택공사 도로기준의 기준치를 모든 배합요인에서 만족시키는 것으로 나타났으나 휨강도의 경우에는 강섬유 혼입률 0.6vol% 이상에서 일본콘크리트공학협회 제안값을 만족시키는 것으로 나타났으며, 실리카퓸과 강섬유를 동시에 혼입한 경우가 우수한 강도특성을 나타냈다. 또한 내구성은 역학적 특성과 유사한 경향성을 나타내 실리카퓸과 강섬유를 동시에 사용한 경우가 가장 우수한 내구성능을 나타냈으며, 실리카퓸 10wt.%와 각섬유 0.6vol.%를 함께 사용한 경우 Plain의 경우에 비해 골재비산저항성은 27%정도, 동결응해저항성은 약 60%정도 개선되는 것으로 나타났다. 또한 포장용 포러스콘크리트의 흡음특성은 소음저감계수가 0.48로 나타나 50%에 가까운 흡음성능을 발휘하는 것을 확인할 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제22권3호
• /
• pp.328-336
• /
• 1989

27 shipyard welders were diagnosed as pneumoconiosis and suspected pneumoconiosis(1976-1988) by chest radiographs and were observed over three years. 27 welders were divided into three groups by the state of exposure to welding fume i.e. cessation, decresase or continuity of exposure. And we observed the changing pattern of the chest radiographs of 27 welders with the passage of time. The results were as follows; 1. Grour I (ceased exposure to welding fume) were 10 cases(3 cases: suspected pneumoconiosis,7 cases: pneumoconiosis). Chest radiographs of all cases were improved. The shape and size of small opacities was improved in 6 cases(85.7%) and did not changed in 1 case(14.3%) out of 7 pneumoconiosis welders. 2. Group II (decreased exposure to welding fume) were S cases(2 cases: suspected pneumoconiosis, 3 cases: pneumoconiosis). Chest radiographs were progressed in 2 cases(40%), did not changed in 1 case(20%), were improved in 2 cases(40%) out of 5 cases. The shape and size of small opacities was progressed in 1 case(33.3%) and was improved in 2 cases(66.7%) out of 3 pneumoconiosis welders. 3. Group III(continued expoxsure to welding fume) were 12 cases(1 case: suspected pneumoconiosis, 11 cases: pneumoconiosis). Chest radiographs were progressed in 9 cases(75%), did not changed in 3 cases(25%) out of 12 cases. The shape and size of small opacities was progressed in 1 case(9.1%) and did not changed in 10 cases(90.9%) out of 11 pneumoconiosis welders. 4. The average duration for development into suspected pneumoconiosis was 6.6 years and for progression of each one category after that was 2.2 years(p<0.01). The radiological appearance of pneumoconiosis had disappeared or decreased after cessation of exposure to the welding fume. So that, early detection and control e.g., change of department of pneumoconiosis of welders by screening program will be important for medical surveillance of welders.

• 한국건설순환자원학회논문집
• /
• 제7권1호
• /
• pp.66-73
• /
• 2019

광산의 약 80%가 휴광 또는 폐광된 광산으로 대부분 적절한 환경처리시설 없이 방치되어 있다. 폐광산 주변 지역은 산성광산 배수와 침출수 유출 등의 문제가 발생되고 있으며, 이로 인한 지반 침하는 싱크홀 발생으로 안전사고를 유발시킬 수 있다. 본 연구에서는 기존 고로슬래그 미분말 기반 광산 차수재의 나노 실리카 및 실리카흄 대체율 변화에 따른 차수재의 기초 특성을 검토하기 위해 플로우, 압축강도, 흡수율, 기공특성, 수화특성을 실시하였다. 그 결과 나노실리카 및 실리카흄의 대체율이 증가할수록 나노실리카의 시험체는 실리카흄의 시험체보다 플로우, 압축강도가 증가하고 흡수율은 감소하였다. 기공특성의 경우 나노실리카 및 실리카흄 대체율이 증가할수록 기공량이 감소하는 것으로 나타났으며 특히 직경 10~1,000nm의 모세관 기공량이 감소하는 것으로 나타났다. 선 회절분석 및 SEM 측정은 Plain과 실리카흄 5% 대체 시험체와 비교할 경우 수화생성물의 피크 위치가 거의 동일하게 나타났다. 나노실리카 및 실리카흄의 사용은 광산 차수재의 수밀성 향상이 가능할 것으로 판단되며 경제성을 고려하여 적절히 사용한다면 광산 차수재의 재료로서 활용 가능할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.133-136
• /
• 1994

This study is to investigate properties of the ultra high-strength concrete using silica rume and fly ash. For this purpose, the properties of fresh concrete and hardened concrete are examined with varing water-cement ratio, silica fume and fly ash content and so on. From these test results, it is possible to maunfacture the miximum strength of 1, 200kg/$\textrm{cm}^2$ with cement content 800kg/$\textrm{m}^3$, 18% water-cement ratio, 105 silica fume content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.675-680
• /
• 2002

This study was to operate a fitting production specific of concrete product for proper mixing discovery. Testing method was to operate slump, air content, compressive strength test. The standard was water-cement ratio 50% and weight substitution 0%, 10%, 20% by Fly-ash and using Silica-fume and HPMC(Hydroxy propyl methyl cellulos) by additive. The result of this study showed when add Fly-ash to Silica-Fume is better than HPMC.