• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.250-257
• /
• 1999

Driving simulators are used effectively for human factor study, vehicle system development and other purposes by enabling to reproduce actural driving conditions in a safe and tightly controlled enviornment. Interactive simulation requries appropriate sensory and stimulus cuing to the driver . Sensory and stimulus feedback can include visual , auditory, motion, and proprioceptive cues. A fixed-base driving simulator has been developed in this study for vehicle system developmnet and human factor study . The simulator consists of improved and synergistic subsystems (a real-time vehicle simulation system, a visual/audio system and a control force loading system) based on the motion -base simulator, KMU DS-Ⅰ developed for design and evaluation of a full-scale driving simulator and for driver-vehicle interaction.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.107-112
• /
• 1998

A great deal of time and effort are required to evaluate the safety and durability of a vehicle structure in the vehicle development stage. It is difficult to find the reasons for cracks which occur in the body and frame of a vehicle during tests. Recently computer aided engineering techniques have been utilized to solve the problems of safety and durability of vehicles. In this study, a dynamic stress analysis is performed on the frame of the vehicle by rigid and flexible multibody dynamics techniques. The result of the analysis is compared to that of the actual test. The full vehicle dynamic models for the rigid and flexible bodies are developed by DADS package. The modal coordinate system is used to save time for the dynamic stress analysis. The flexible multibody dynamic models have 12 normal modes considering the flexibility of the frame. Dynamic stresses arc calculated by relating the stress influence coefficients and the applied forces.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1125-1134
• /
• 2004

This paper presents a mathematical model which is about the dynamics of not only a two wheel steering vehicle but a four wheel steering vehicle. A sliding mode ABS control strategy and PID rear wheel control logic are developed to improve the brake and cornering performances, and enhance the stability during emergency maneuvers. The performances of the controllers are evaluated under the various driving road conditions and driving situations. The numerical study shows that the proposed full car model is sufficient to accurately predict the vehicle response. The proposed ABS controller reduces the stopping distance and increases the vehicle stability. The results also prove that the ABS controller can be employed to a four wheel steering vehicle and improves its performance. The four wheel steering vehicle with PID rear wheel controller shows increase of stability when a vehicle speed is high and sharp cornering maneuver when a vehicle speed is low compared to that of a two wheel steer vehicle.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1231-1237
• /
• 2014

군용 차량의 경우 야지 주행에 대한 성능 시험이 필수적인데 실차 시험의 경우 비용과 시간에 의한 제약을 받게 되므로, 시뮬레이션을 통한 성능 분석이 효율적이다. 본 연구에서는 상용 다물체 해석프로그램인 MSC.ADAMS 를 이용하여 차량 모델을 개발한다. 타이어 수직 강성 시험을 수행하고 FTire 모델에 반영하여 타이어 모델을 생성한다. 댐퍼의 경우 비선형 특성 시험을 통해 얻은 결과를 반영하여 댐퍼를 모델링 하였으며, 겹판 스프링은 빔 요소 모델로 차량 모델을 구성한다. 단순 장애물 통과 시험 및 파형로 통과 시험을 수행하고 가속도 응답 및 휠 하중 응답 분석을 통해 차량 모델의 신뢰성을 검증하였다.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.66-78
• /
• 1995

In this paper, we address vehicle modeling and dynamic analysis of four wheel steering systems (4WS). 4WS is one of the devices used for the improvement of vehicle maneuverability and stability. All research done here is based on a production vehicle from a manufacturer. To study actual system response, a three dimensional, full vehicle model was created. In past research of this type, simple, two dimensional, bicycle vehicle models were typically used. First, we modelled and performed a dynamic analysis on a conventional two wheel steering(2WS) vehicle. The modeling and analysis for this model and subsequent 4WS vehicles were performed using ADAMS(Automatic Dynamic Analysis of Mechanical Systems) software. After the original vehicle model was verified with actual experiment results, the rear steering mechanism for the 4WS vehicle was modelled and the rear suspension was changed to McPherson-type forming a four wheel independent suspension system. Three different 4WS systems were analyzed. The first system applied a mechanical linkage between the front and rear steering mechanisms. The second and third systems used, simple control logic based on the speed and yaw rate of the vehicle. 4WS vehicle proved dynamic results through double lane change test.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.316-323
• /
• 2014

This paper proposes the 3D modeling and simulation technique for predicting the integrated performance of combat vehicle. To consider the practical driving and firing condition of a combat vehicle, the full vehicle model, which can define the six degrees-of-freedom of vehicle motion and various firing angles, is developed. The critical design parameters such as the stiffness and damping coefficient of suspension system are applied to construct the analysis model of vehicle. A simple ballistic model, which incorporates the empirical interior ballistic model and the point mass trajectory model, is built to estimate the firing range and the firing recoil force. To predict the integrated performance and analyze the effect of system parameters, MATLAB/SIM-ULINK model of a combat vehicle for performing the real time simulation is also developed. Several simulation tests incorporating the road bump and the firing recoil force are presented to confirm the effectiveness of the proposed vehicle model.

• Journal of Platform Technology
• /
• 제11권2호
• /
• pp.54-65
• /
• 2023

전기자동차에 사용되는 배터리는 전기자동차의 특성상 정격용량이 매우 커다란 배터리이다. 전기자동차를 장기간 운행하거나 교통사고로 전기자동차가 폐차되게 되면 전기자동차용 배터리는 폐배터리가 된다. 폐차되는 차량이더라도 전기자동차용 폐배터리에 남아 있는 용량은 다른 용도로 사용하기에 충분하다. 자동차용 폐배터리는 매우 고가이기때문에 재활용 및 재사용이 필요하지만 재활용 및 재사용을 위한 폐배터리 성능등급 측정기준이 부족한 문제가 있었다. 폐배터리의 잔존용량을 측정하는 방법으로 가장 안정적이고 신뢰할 수 있는 방법은 완전 충·방전을 이용하여 배터리의 잔존용량을 측정하는 것이다. 하지만 이러한 완전 충·방전에 방식에 의한 검사 방법은 배터리의 용량에 따라 다르지만 검사하는데 하루 이상이 걸리는 단점을 가지고 있으며 많은 사람들이 이러한 문제를 해결하기 위하여 많은 노력을 하고 있다. 본 논문에서는 전기자동차 배터리에 대한 검사 시간을 줄일 수 있는 방법으로 셀간 전압 편차를 활용한 전기자동차 배터리 잔존용량 분석 기법을 연구 분석하였다. 이를 위하여 완전 충·방전 기반의 용량 측정시스템을 구성하고 코나 폐배터리를 이용하여 실험데이터를 수집하였고 배터리 팩을 구성하고 있는 배터리 셀간 전압 편차와 잔존용량과의 상관관계를 분석하여 배터리 검사에 활용할 수 있는지를 검증하였다.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.25-31
• /
• 2011

The purpose of the study is to enhance the vehicle handling stability of the PACE formula vehicle. Required data for the dynamic analysis of the vehicle are as follows: Mass, moment of inertia, and tire's dynamic properties. Mass and moment of inertia data were calculated using Siemens NX 5.0 which results were verified with VIMF measurements of GMDAT. Dynamic data for the tire were supplied by Kumho Tire. Aerodynamic forces play an important role in the formula vehicle which forces were calculated by using Fluent. Full vehicle dynamic analysis using Carsim software has been carried out to find out the improvement of the vehicle stability by changing the shapes of the rear wing.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.31-37
• /
• 2010

In proportion to increasing interest in vehicle safety, many country have regulated vehicle safety and performed NCAP(New Car Assessment Program). However vehicles which had good results in these compliance and NCAP frontal crash test have caused problems such as the fork effect and over-riding in real car-to-car accidents. To complement these issues, new frontal crash test modes using new barrier like FWDB and PDB have been developed by EEVC WG15. In this paper, FWDB frontal crash test was performed and the result was compared with the full frontal crash test using the rigid wall in order to comprehend the characteristic of FWDB. The results of FWDB test were compared with one of USNCAP and KNCAP. Using USNCAP data, vehicle performance like deformation and wall force were studied. A comparative study of dummy injuries was made by using KNCAP result. The results showed that vehicle performance of FWDB test like displacement and effective acceleration was similar in spite of absorbing energy of FWDB due to the greater vehicle deformation of rigid wall test. In FWDB test, driver dummy head bottomed out but most of injuries were superior to the injury of rigid wall test.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.469-475
• /
• 2006

In this paper, an optimal suspension system with preview of the road input is synthesized for a half tracked vehicle. The main goal of this research is to improve the ride comfort characteristics of a fast moving tracked vehicle in order to maintain the driver's driving capability. Several different kinds of preview control algorithms are evaluated with active or semi-active suspension systems. The road information estimated from the motion of the 1st road-wheel is adequate to make the best use of the preview control algorithm for tracked vehicles. The ride-comfort characteristics of the tracked vehicle are more dependent on pitching angular acceleration than heaving acceleration. The pitching motion is reduced by the suspension system with hard outer suspensions and soft inner suspensions. Simulation results show that the performance of sky-hook algorithms for ride comfort nearly follow that of full state feedback algorithms.