• Informatization Policy
• /
• v.27 no.3
• /
• pp.19-38
• /
• 2020

The purpose of this study is to explore the digital divide that appears in the mobile Internet use by farmers and fishers. To this end, we first analyzed the impact of farmers and fishers' attitudes toward technology, material access, and skills on the use of mobile social media. In addition, the digital divide was identified according to the population, socioeconomic factors among farmers and fishers, and the divide and the cause of the mobile Internet use among both part- and full-time farmers and fishers were analyzed. As a result of empirical analysis using the <2018 Report on the Digital Divide>, attitudes, material access, and content-related skills had a significant effect on the use of mobile social media. Also, the digital divide was found in different age groups and residential regions. There was also a significant difference in the use of mobile social media between part- and full-time farmers and fishers, and this divide was caused by attitudes toward new technologies. Based on these results, this study presented policy implications such as the need for education on informatization for farmers and fishers, support for underdeveloped rural communities, and technical support for full-time farmers and fishers in order to bridge the digital divide.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.324-329
• /
• 2012

Excessive tooth wear causes loss of tooth structure, disharmony of occlusal plane, functional and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by growth of alveolar bone, if the length of tooth is not enough for the retention of restoration, minimum increase of occlusal vertical dimension is required without discomfort of the patient. In this case, 33-year-old woman drinks more than 1 liter of soft drinks a day and has bruxism in night time, visited in Seoul National University Dental Hospital with chief complaint of generalized tooth wear and related esthetic and functional problems. It was considered as a loss of occlusal vertical dimension based on the accelerated tooth wear caused by erosion and bruxism and facial appearance, phonetic, esthetic, functional evaluations. It was planned to raise occlusal vertical dimension by provisional restoration two times for patient's adaptation, 3 mm and 2 mm each, total 5 mm. Confirming no discomfort and clinical symptom during total 16 weeks after restoration with provisional fixed restoration, it was restored with porcelain fused to gold crown and bridge. Because the patient was young woman, anterior teeth were restored with collarless porcelain fused to gold crown. This case presents that satisfactory esthetic and functional result by full mouth rehabilitation with increase of occlusal vertical dimension.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.439-447
• /
• 2019

The distance between the natural teeth and the implants is an important factor in preserving the periodontal tissues and esthetics. And abnormal positional displacement and tilting of the teeth during restorative procedure may require intentional root canal treatment and may affect masticatory function. This report is to present a successful full mouth rehabilitation of a patient with uneven dentition and collapsed occlusion using orthodontic and implant treatment. The patient had no symptoms or discomfort of temporomandibular joint disorder such as pain or sound. The orthodontic treatment was continued until implant provisional prosthesis delivery. And the vertical height of occlusion was elevated 2mm on anterior basis for anterior teeth protection and esthetics. After the orthodontic treatment, the implant abutments and natural teeth were finally restored with porcelain-fused-to-metal crowns and bridges. Satisfactory function and esthetic outcomes are observed after 6months of follow up.

• Journal of Digestive Cancer Research
• /
• v.5 no.1
• /
• pp.44-49
• /
• 2017

Background: Recently, endoscopic submucosal dissection (ESD) with laparoscopic sentinel lymph node dissection, named ESN or endoscopic full-thickness gastric resection with laparoscopic sentinel lymph node dissection, named Hybrid-natural orifice transluminal endoscopic surgery (NOTES) was suggested the possibility of minimally invasive treatment for patients with early gastric cancer (EGC) who were beyond the indication of ESD. This study aimed to evaluate the outcomes of ESN or Hybrid-NOTES. Methods: We retrospectively analyzed patients treated with these therapies from January 2009 to May 2013 in terms of short- and long-term outcomes. Each patient was diagnosed with EGC but was not included in ESD indications and had the high risk of lymph node metastasis (LNM). Results: A total of 42 patients with EGC treated by ESN or Hybrid-NOTES. Of the 21 patients who underwent ESN, a total of 4 patients underwent additional gastrectomy, 1 with LNM, 1 with surgical complication, and 2 with noncurative resection. Of the 21 patients who underwent Hybrid-NOTES, a total of 5 patients underwent additional surgery, 1 with LNM, 2 with surgical complication, and 2 with noncurative resection. Overall survival was 100% over a mean follow-up of 75 months, but 3 patients underwent ESD or gastrectomy with metachronous lesion. And 1 patient who had received ESN was found to have a metastatic lymph node and undergo palliative chemotherapy. Conclusion: ESN or Hybrid-NOTES showed favorable short-and long-term outcomes. These methods may be utilized as a bridge between ESD and gastrectomy in the case of EGC which is more likely to have LNM beyond the ESD indications.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.329-338
• /
• 2024

Purpose: This study verified the safety of the improved box-type girder behavior by comparing and evaluating the bending behavior results of a full-scale specimen based on the analytical behavior of the splice element PSC U-shaped girder with integrated tensioning systems. Method: Based on the results of the service and strength limit state design using the bridge design standard(limit state design method), the applied load of a 40m full-scale specimen was calculated and a static loading experiment using the four-point loading method was performed. Result: When the design load, crack load, and ultimate load were applied, the specimen deflection occurred at 97.1%, 98.5%, and 79.0% of the analytical deflection value. When the design load, crack load, and ultimate load were applied, the crack gauge was measured at 0.009~0.035mm, 0.014~0.050mm, and 6.383~5.522mm at each connection. Conclusion: The specimen behaved linear-elastically until the crack load was applied, and after cracks occurred, it showed strainhardening up to the ultimate load, and it was confirmed that the resistance of bending behavior was clearly displayed against the applied load. The cracks in the dry joints were less than 25% of grade B based on the evaluation of facility condition standard. The final residual deformation after removing the ultimate load was 0.114mm, confirming the stable behavior of the segment connection.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.19-32
• /
• 2020

The purpose of this study was to investigate the influence factors of the university level centering on the entrepreneurial performance of the university students and full-time faculties in the situation of increasing interest in entrepreneurial university. In order to achieve the purpose of the study, a panel data was established from 2015 to 2018 on the basis of the university notification data. The panel data included universities with data on the number of university students and full-time faculty founders for at least two years. Through this, four year data from 154 universities were used for analysis. As an analysis method, frequency analysis and descriptive statistics were conducted to understand the characteristics of the university. Since then, panel negative binomial regression analysis has been conducted in consideration of the longitudinal features and distribution of the data. Also, based on the Hausman test results, the results were interpreted based on random effect model. The results of this study are as follows. First, as a result of the analysis of the entrepreneurial performance and the change trend of the domestic university from 2015 to 2018, the entrepreneurial performance of the university has been steadily increasing in the last four years, and the increase in the number of university student entrepreneurs was relatively higher than the full-time faculties. Second, economic and educational approaches need to be combined to promote university students' start-ups. The university factors that promote the start-up of university students were found to be scholarships, start-up grants, startup lectures, and startup clubs. Third, the openness and regional characteristics of the univeristy can promote the establishment of university students. Fourth, the establishment of a research environment and support for start-ups for full-time faculty members can enhance their start-up performance. The university factors that promote the start-up of full-time faculty were research funds and staffes who support start-up. The conclusions drawn from these findings are as follows. First, overall efforts are needed to develop into an entrepreneurial university. Second, in order to change into an entrepreneurial university, direct support for entrepreneurship is needed. Third, as an entrepreneurial university, it is necessary to find a way to bridge the gap by university according to region and size. Fourth, it is necessary to reinforce the support for linking the research results of universities to start-ups. Fifth, it is necessary to improve the atmosphere for full-time faculty members to be entrepreneur.

• (The) Research of the performance art and culture
• /
• no.43
• /
• pp.145-172
• /
• 2021

Shin Myung-soon's is based on the taboo 'bombing of the Han River Bridge'. The reality of the bombing of the Han River Bridge in 1950 and the shooting of Colonel Choi Chang-sik was known only as a word of mouth. At that time, the ruling class did not want to reveal the painful mistakes of the unfavorable war situation in the early days of the war and the false broadcasting of the president. The truth of the case, which was kept completely secret even to the bereaved family, could only be revealed after the regime change. After that, the bereaved family of Colonel Choi Chang-sik confirmed the innocence of the deceased through a request for retrial, and then the was born. However, the fate of was not so smooth. At the time, the performance officials vividly remember the difficulties they had with the text. Despite passing the pre-screening of the script, the performance was canceled just before the performance. The fact that the National Theater, officials from the Ministry of Culture and Education, and even military generals visited the practice room to stop the performance, on the contrary, was a testimony to the dangers of . It can be summarized as a crack in official history and a move to stop it. was later adapted into a special TV drama in 1981 and was first released to the public. This was a very meaningful step in terms of dealing with politically sensitive subjects on television, but the inconsistency of in the first place has largely disappeared. After that, in 1988, only after democracy entered the phase of appeasement, could be performed in its full form. In short, can be said to be an example of a process in which the history of the Korean War recorded from the standpoint of an established order and the counter-memory that crack it up are transformed according to the changes of the times and media.

• Steel and Composite Structures
• /
• v.36 no.5
• /
• pp.553-568
• /
• 2020

Steel-concrete composite structures have been extensively used in building, bridges, and other civil engineering infrastructure. Shear stud connectors between steel and concrete are essential in composite members to guarantee the effectiveness of their behavior in terms of strength and deformability. This study focuses on investigating the shear stiffness of headed studs embedded in several types of concrete with wide range of compressive strength, and their effects on the elastic behavior of steel-concrete composite girders were evaluated. Firstly, totally 206 monotonic push-out tests from the literature were reviewed to investigate the shear stiffness of headed studs embedded in various types of concrete (NC, HPC, UHPC etc.). Shear stiffness of studs is defined as the secant stiffness of the load-slip curve at 0.5V_u, and a formulation for predicting defined shear stiffness in elastic state was proposed, indicating that the stud diameter and the elastic modulus of steel and concrete are the main factors. And the shear stiffness predicted by the new formula agree well with test results for studs with a diameter ranging from 10 to 30 mm in the concrete with compressive strength ranging from 22.0 to 200.0MPa. Then, the effects of shear stiffness on the elastic behaviors of composite girders with different sizes and under different loading conditions were analyzed, the equations for calculating the stress and deformation of simply supported composite girders considering the influence of connection's shear stiffness were derived under different loading conditions using classical linear partial-interaction theory. As the increasing of shear stiffness, the stress and deflection at the most unfavorable section under partial connected condition tend to be those under full connected condition, but the approaching speed decreases gradually. Finally, the connector's shear stiffness was recommended for fully connection in composite girders with different dimensions under different loading conditions. The findings from present study may provide a reference for the prediction of shear stiffness for headed studs and the elastic design of steel-concrete composite girder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.17-23
• /
• 2020

This paper proposes a simulation model using an equivalent circuit for the development of an MMC system. The MMC has been chosen as the most suitable topology for high voltage power transmission, such as a voltage-type HVDC, and it has dozens to hundreds of sub-modules in the form of a half-bridge or full-bridge connected in series. A simulation study is essential for the development of an MMC algorithm. On the other hand, it is virtually impossible to construct and implement MMC simulation models, including hundreds or thousands of switching devices. Therefore, this paper presents an MMC equivalent model, which is easily expandable and implemented by modeling the dynamic characteristics. The voltage and current equation of the equivalent circuit was calculated using the direction of the arm current and switching signal. The model was implemented on Matlab/Simulink. In this paper, to show the validity of the model developed using Matlab/Simulink, the simulation results of a five-level MMC using the real switching element and the proposed equivalent model are shown. The validity of the proposed model was verified by showing that the current and voltage waveform in the two models match each other.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.123-129
• /
• 2017

This study investigated the dental prosthesis condition from the sixth primitive data of Korea National Health and Nutrition Examination Survey to analyze and compare the necessity of existent dental prosthesis condition, dental bridge and dentures in order to determine the real oral health condition by educational level targeting adults aged over 20 years old. From the results, based on demographic-sociologic features, 32.2% of females were under elementary school graduation level, which was lower than males, and the educational level decreased with increasing age, and these trends were statistically significant. As for income level, 45.3% of university graduates had the highest income level and 77.4% of this age group were professionals, which was the highest percentage and was statistically significant. In terms of dental prosthesis condition according to educational level, the under elementary school graduation group had the most dental prosthesis and the greatest need for partial dentures and full dentures. As for the necessary number of fixed implants, the upper jaw had the most number of fixed implants and in the lower jaw, the under middle school graduation needed the most fixed implants.