• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.45-61
• /
• 2016

The domestic and foreign scholars conducted many studies on mechanical properties of wave web steel beam and high-strength spiral stirrups confined concrete columns. Based on the previous research work, studies were conducted on the anti-seismic property of the end plate bolt connected wave web steel beam and high-strength spiral stirrups confined concrete column nodes applied with pre-tightening force. Four full-size node test models in two groups were designed for low-cycle repeated loading quasi-static test. Through observation of the stress, distortion, failure process and failure mode of node models, analysis was made on its load-carrying capacity, deformation performance and energy dissipation capacity, and the reliability of the new node was verified. The results showed that: under action of the beam-end stiffener, the plastic hinges on the end of wave web steel beam are displaced outward and played its role of energy dissipation capacity. The study results provided reliable theoretical basis for the engineering application of the new types of nodes.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.359-368
• /
• 1996

The performance and exhaust emissions of a diesel engine using light oil, heated, rice-bran oil , heated rice-bran oil treated with ultrasonic wave, used frying oil, use frying oil treated with ultrasonic wave, used frying oil, used frying oil treated with ultrasonic wave, methyl esters of rice-bran oil and used frying oil have been compared. All the fuels performed satisfactorily in a precombustion chamber-type diesel engine without injection pump recalibration or any engine modification at the range of engine speed from 1600 to 2800 rpm at its full load during a sort period , with the rice-bran oil and rice-bran oil treated with ultrasonic wave requiring somewhat preheating when ambient temperature was below 15$^{\circ}C$. General performance and emission characteristics of light oil and bio-oils were comparable , with the bio-oil based fuels giving very low SO$_2$ and lower smoke readings.

• Wind and Structures
• /
• 제10권5호
• /
• pp.401-420
• /
• 2007

Field measurements of the wind-induced response of two residential reinforced concrete buildings, among the tallest in the world, have been performed during two typhoons. Natural periods and damping values have been determined and compared with other field measurements and empirical predictors. Suitable and common empirical predictors of natural period and structural damping have been obtained that describe the trend of tall, reinforced concrete buildings whose structural vibrations have been measured in the collection of studies in Hong Kong compiled by the authors. This data is especially important as the amount of information known about the dynamic parameters of buildings of these heights is limited. Effects of the variation of the natural period and damping values on the alongwind response of a tall building for serviceability-level wind conditions have been profiled using the gust response factor approach. When using this approach on these two buildings, the often overestimated natural periods and structural damping values suggested by empirical predictors tended to offset each other. Gust response factors calculated using the natural periods and structural damping values measured in the field were smaller than if calculated using design-stage values.

• 문화기술의 융합
• /
• 제5권2호
• /
• pp.381-388
• /
• 2019

본 논문에서는 5G 이동통신 무선접속망의 프론트홀(fronthaul), 미드홀(midhaul), 백홀(backhaul) 설치 비용 효율성과 구축 용이성을 증대시키기 위해 제안된 MXN의 구조 및 동작절차를 제시하고, XDU 탐색 및 xhaul 링크 설정방식을 분석하였다. 특히 본 논문에서는 mmWave기반의 xhaul 링크 설정을 위한 여러 형태의 빔탐색 방식을 제시하고 이들 방식에 대한 성능 분석을 수행하였다. 성능 분석의 결과 제안한 임계치 기반의 탐색 혹은 획득 정보기반의 탐색은 모든 빔을 순차적으로 탐색하는 전체 빔 탐색 방식에 비해 50%이하의 짧은 탐색 지연시간을 보장함을 알 수 있었다.

• 지구물리와물리탐사
• /
• 제19권3호
• /
• pp.136-144
• /
• 2016

탄성파 자료의 역산은 파동방정식에 기초하고 있으므로 파동방정식의 해를 정확하게 구하는 것이 가장 중요하다. 특히, 전파형역산은 파동장 전체를 이용하기 때문에 정문제에 해당하는 모델링이 정확하게 이루어져야 신뢰할 수 있는 결과를 얻게 된다. 파동방정식의 수치해를 구하는 대표적인 기법인 유한차분법과 유한요소법은 해의 수렴성을 보장할 수 있어야 하는데, 해의 수렴성은 이론적으로 일반화된 증명이 되어 있으나 실제 문제에 적용할 경우 일관성과 안정성을 분석해야 한다. 모델링 결과의 일관성은 송신원 함수의 구현이 매우 중요한 부분인데, 유한차분법은 디랙 델타 함수(Dirac delta function)를 나타낼 때 격자 간격으로 표준화된 싱크 함수(sinc function)를 사용해야 하는 반면 유한요소법은 격자 간격에 관계없이 기저함수 값을 사용하면 된다. 주파수 영역 파동방정식을 사용할 경우 송신 파형 함수의 스펙트럼을 정확하게 표현하기 위해 샘플링 이론으로 정의되는 시간 간격보다 더 조밀한 샘플링 간격을 사용하고 나이퀴스트(Nyquist) 주파수보다 더 높은 주파수를 최대 주파수로 사용해야 한다. 또한, 복소 각주파수를 사용하는 경우 감쇠 파동방정식을 만족하기 위해서는 송신 파형 함수를 먼저 감쇠한 후 사용해야 한다. 이러한 요건들이 모두 만족되었을 때 신뢰할 수 있는 역산 알고리즘 개발이 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1313-1315
• /
• 2002

This paper proposes an inverter for the grid-connected photovoltaic system based on the transformer-less inverter. This system consists of a high frequency inverter bridge, high frequency transformer, diode bridge rectifiers, a DC filter, a low frequency inverter bridge, and an AD filter. The high frequency inverter bridge switching at 20kHz is used to generate bipolar PWM pulse, which is subsequently rectified by diode bridge rectifiers to result in a full-wave rectified sine wave. Finally, it is unfolded by a low frequency inverter bridge to result in a 60Hz sine wave power output. In this paper, the control algorithm for synchronous current feedback control method and a maximum power point tracking (MPPT) method using DSP are described. And, the simulation and experimental results are shown to verify the validity of the proposed system.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.81-86
• /
• 2003

This paper deals with the performance analysis and design of impulse turbine for OWC type wave energy plant. Numerical analysis was performed using a commercially-available software FLUENT. This parametric study includes the variation of several important parameters such as the number and shape of blades, hub ratio and tip clearance. Since parametric study at various flow coefficients requires considerable amount of computing tim, two-dimensional analysis was employed to find out optimum principal particulars in rather simple manner. Full three-dimensional calculation was also performed for several test cases to confirm the validity of two-dimensional approach. Up to the present stage, tentative result is well demonstrating the usefulness of 2-D analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.117-122
• /
• 2005

This paper proposes an inverter for the grid-connected photovoltaic system based on the transformer-less inverter. This system consists of a high frequency converter bridge, high frequency transformer, diode bridge rectifiers, a DC filter, a low frequency inverter bridge, and an AC filter. The high frequency converter bridge switching at 20kHz is used to generate bipolar PWM pulse, and the high frequency transformer raise its voltage twice, which is subsequently rectified by diode bridge rectifiers to result in a full-wave rectified sine wave. Finally, it is unfolded by a low frequency inverter bridge to result in a 60Hz sine wave power output. Even though the high frequency link system needs more power semiconductors, a reduced size, light weight, and saved parts cost make this system more comparative than the other systems due to elimination of 60Hz transformer.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1738-1745
• /
• 2015

Radiation characteristics of a probe-fed rectangular microstrip patch antenna printed on a finite grounded high permittivity substrate are investigated systematically for various square grounded dielectric substrate sizes with several thicknesses and dielectric constants by experiment and full wave simulation. The effect of the substrate size on the radiation characteristics of a rectangular patch antenna is mainly determined by the effective dielectric constant of surface waves on a grounded dielectric substrate. As the effective dielectric constant of surface waves increases, the substrate sizes for the maximum broadside gain and the required onset for a large magnitude of squint angle decrease, while the variations of the broadside gain, the front-to-back ratio, and the magnitude of squint angle versus the substrate size increase due to the increase of the power of the surface wave.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.