• 제목/요약/키워드: Full vehicle model

검색결과 240건 처리시간 0.027초

철도차량 부유상구조의 Floor support 재질이 차량 실내소음에 미치는 영향에 관한 연구 (A Study for Interior Noise Contribution of Support Material used in Railway Vehicle Floor)

  • 손병구;김종년;우관제
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.1776-1781
    • /
    • 2008
  • To reduce interior noise of running vehicles, a floating floor construction has been widely used in recent railway industry. Among the key factors of the floating floor design, dynamic stiffness is of most important in acoustical point of view. Sometimes hard rubber type supports have often been selected due to the other design constraints such as heavy load condition, durability of rubber element and its cost etc., even though it seems like the softer support, the better isolation of noise and vibration. In this paper two representative floor supports have been considered to evaluate their effectiveness in interior noise contribution: one is a soft rubber and another is a relatively hard one. From the measured dynamic stiffness of the specimens, equivalent stiffness of actual floating floor has been derived to use in the analytical models. Calculated air-borne and structure-borne noise insulation properties of the floating floors have been compared with experiments in prototype car. In full car model interior noise levels of running vehicles have been predicted to quantify the effectiveness of the two different floating support materials and verified through the measured inside noise levels of actual train as well. By comparison with difference of running noise levels two materials for floor support can be investigated quantitatively so that it could be applied in floating floor design.

  • PDF

철근 콘크리트 교량의 열화 평가를 위한 지표투과레이더 자료의 완전파형역산 (Full-waveform Inversion of Ground-penetrating Radar Data for Deterioration Assessment of Reinforced Concrete Bridge)

  • 안영돈;최용규;장한누리;이동권;장한길로;신창수
    • 한국지반환경공학회 논문집
    • /
    • 제25권2호
    • /
    • pp.5-14
    • /
    • 2024
  • 철근 콘크리트 교량 바닥판은 차량 하중과 우수침투 등으로 가장 먼저 손상이 발생하며 제설염화물 등으로 인한 철근 및 기타 금속 부재가 부식되면서 콘크리트 열화가 주로 발생한다. 교량 바닥판의 시공 상태 및 포장 내부 바닥판의 열화는 지표투과레이더(ground-penetrating radar, GPR) 탐사 자료를 이용하여 평가하고 있다. 교량의 콘크리트 열화 상태를 평가하기 위해서는 철근의 위치 및 열화 지점을 정확하게 파악하기 위한 GPR 자료 해석 기술 개발이 필요하다. GPR 탐사에서는 지반 매질의 레이더파 전파 속도 차이에 의한 반사 및 회절파 신호를 취득한다. 그러므로 이 연구에서는 GPR 탐사 자료를 이용해서 지반 매질의 레이더파 전파 속도를 추정하고 교량 바닥판의 열화를 평가하기 위한 완전파형역산(full-waveform inversion, FWI) 기술을 개발하였다. 개발된 FWI 기술의 적용성은 콘크리트 박리 및 철근 부식과 같은 교량 바닥판 열화현상을 보여주는 GPR 속도 모델을 만들어서 수치 실험을 수행하여 검증하였다. 합성 GPR 자료로 역산한 결과 교량 바닥판의 철근 위치와 열화 지점을 역산으로 계산된 속도 영상으로 확인할 수 있었다.

맥퍼슨 타입 반 능동 현가장치의 진동제어 성능 고찰 (A Study on Vibration Control Performance of Macpherson Type Semi-Active Suspension System)

  • 사이카 두타;한철희;이태훈;최승복
    • 한국소음진동공학회논문집
    • /
    • 제26권2호
    • /
    • pp.157-164
    • /
    • 2016
  • 이 논문은 MR 댐퍼를 적용한 맥퍼슨 타입의 반 능동 현가장치의 진동제어에 관한 연구를 보여준다. 맥퍼슨 스트럿의 기하학적 분석을 바탕으로 동역학 지배 방정식이 설립되었으며, 제어기 설계를 위해 평형 점 근처의 비선형적 운동이 선형화하였다. 이어서 시스템의 향상된 반응시간을 위해 새로운 적응 움직임 슬라이딩모드 제어기를 제안하였으며, 시뮬레이션을 통해 범프와 랜덤도로에서 차량으로 가해지는 진동에 따른 제어 성능을 기존슬라이딩모드 제어기 및 스카이훅 제어기와의 비교를 통해 우수성을 평가하였다.

상황인식 기반 지능형 최적 경로계획 (Intelligent Optimal Route Planning Based on Context Awareness)

  • 이현정;장용식
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.117-137
    • /
    • 2009
  • Recently, intelligent traffic information systems have enabled people to forecast traffic conditions before hitting the road. These convenient systems operate on the basis of data reflecting current road and traffic conditions as well as distance-based data between locations. Thanks to the rapid development of ubiquitous computing, tremendous context data have become readily available making vehicle route planning easier than ever. Previous research in relation to optimization of vehicle route planning merely focused on finding the optimal distance between locations. Contexts reflecting the road and traffic conditions were then not seriously treated as a way to resolve the optimal routing problems based on distance-based route planning, because this kind of information does not have much significant impact on traffic routing until a a complex traffic situation arises. Further, it was also not easy to take into full account the traffic contexts for resolving optimal routing problems because predicting the dynamic traffic situations was regarded a daunting task. However, with rapid increase in traffic complexity the importance of developing contexts reflecting data related to moving costs has emerged. Hence, this research proposes a framework designed to resolve an optimal route planning problem by taking full account of additional moving cost such as road traffic cost and weather cost, among others. Recent technological development particularly in the ubiquitous computing environment has facilitated the collection of such data. This framework is based on the contexts of time, traffic, and environment, which addresses the following issues. First, we clarify and classify the diverse contexts that affect a vehicle's velocity and estimates the optimization of moving cost based on dynamic programming that accounts for the context cost according to the variance of contexts. Second, the velocity reduction rate is applied to find the optimal route (shortest path) using the context data on the current traffic condition. The velocity reduction rate infers to the degree of possible velocity including moving vehicles' considerable road and traffic contexts, indicating the statistical or experimental data. Knowledge generated in this papercan be referenced by several organizations which deal with road and traffic data. Third, in experimentation, we evaluate the effectiveness of the proposed context-based optimal route (shortest path) between locations by comparing it to the previously used distance-based shortest path. A vehicles' optimal route might change due to its diverse velocity caused by unexpected but potential dynamic situations depending on the road condition. This study includes such context variables as 'road congestion', 'work', 'accident', and 'weather' which can alter the traffic condition. The contexts can affect moving vehicle's velocity on the road. Since these context variables except for 'weather' are related to road conditions, relevant data were provided by the Korea Expressway Corporation. The 'weather'-related data were attained from the Korea Meteorological Administration. The aware contexts are classified contexts causing reduction of vehicles' velocity which determines the velocity reduction rate. To find the optimal route (shortest path), we introduced the velocity reduction rate in the context for calculating a vehicle's velocity reflecting composite contexts when one event synchronizes with another. We then proposed a context-based optimal route (shortest path) algorithm based on the dynamic programming. The algorithm is composed of three steps. In the first initialization step, departure and destination locations are given, and the path step is initialized as 0. In the second step, moving costs including composite contexts into account between locations on path are estimated using the velocity reduction rate by context as increasing path steps. In the third step, the optimal route (shortest path) is retrieved through back-tracking. In the provided research model, we designed a framework to account for context awareness, moving cost estimation (taking both composite and single contexts into account), and optimal route (shortest path) algorithm (based on dynamic programming). Through illustrative experimentation using the Wilcoxon signed rank test, we proved that context-based route planning is much more effective than distance-based route planning., In addition, we found that the optimal solution (shortest paths) through the distance-based route planning might not be optimized in real situation because road condition is very dynamic and unpredictable while affecting most vehicles' moving costs. For further study, while more information is needed for a more accurate estimation of moving vehicles' costs, this study still stands viable in the applications to reduce moving costs by effective route planning. For instance, it could be applied to deliverers' decision making to enhance their decision satisfaction when they meet unpredictable dynamic situations in moving vehicles on the road. Overall, we conclude that taking into account the contexts as a part of costs is a meaningful and sensible approach to in resolving the optimal route problem.

소형탈선시뮬레이터상에서의 1/5 축소대차 주행안정성 해석 (An Analysis of Running Stability of 1/5 Small Scaled Bogie on Small-Scaled Derailment Simulator)

  • 엄범규;강부병;이희성;송문석
    • 대한기계학회논문집A
    • /
    • 제36권11호
    • /
    • pp.1413-1420
    • /
    • 2012
  • 철도차량의 동적 거동 및 안정성 등을 예측하고 물리적인 특성을 이해하기 위하여 철도선진국인 영국, 프랑스, 일본 등에서는 축소모델 제작 및 시험하는 방법과 컴퓨터 시뮬레이션을 통하여 해석적으로 접근하는 방법이 사용되고 있다. 실물 규모의 동특성 시험은 대규모의 시험설비 구축에 따른 많은 비용과 시간의 소요, 그리고 시험 환경 설정의 어려움 등의 문제점이 발생하게 된다. 이러한 단점들을 극복하고자 상사법칙을 적용한 축소대차 모델을 이용하여 동적 시험 및 컴퓨터 시뮬레이션을 통한 해석적 연구를 수행하고 있다. 본 연구에서는 소형탈선시뮬레이터를 이용한 1/5 축소대차의 주행안정성 시험에서 신뢰성이 검증된 해석모델을 이용하여 주행안정성에 미치는 매개변수 중 주행속도, 차체 하중의 2가지 변수에 따른 1/5 축소대차의 주행안정성 해석을 수행하고, 그에 따른 동적특성을 검토하였다.

B-Rep Solid 구조의 3차원 모델을 이용한 토공량 자동 산정에 관한 연구 (A Study on Automatic Calculation of Earth-volume Using 3D Model of B-Rep Solid Structure)

  • 김종남;엄대용
    • 한국측량학회지
    • /
    • 제40권5호
    • /
    • pp.403-412
    • /
    • 2022
  • 최근 4차 산업혁명이 본격화되고 차세대 ICT 융합 기술이 개발됨에 따라 건설분야 역시 기술변화에 대응하기 위해 다양한 스마트 건설기술이 건설 단계별로 빠르게 도입되고 있다. 특히, 건설현장의 경우 부지설계를 위한 토공량 산출 공정이 설계비용에 큰 부분을 차지하고 있어 공정의 효율화와 정확한 토공량 산출을 위한 관련 연구가 활발히 진행되고 있다. 본 연구는 건설현장의 지형을 3차원으로 신속하게 구축하고 이를 이용하여 효율적으로 토공량을 산출할 수 있는 방법을 제시하고자 한 것이다. 이를 위해 무인비행체로부터 획득한 대축척의 항공사진을 이용하여 건설현장을 3차원 실사모델로 구축하였다. 이때, 구축한 3차원 실사모델은 체적 산출이 불가한 surface 모델 구조를 가짐에 따라 체적 산출이 가능하도록 3차원의 solid 모델로 구조 변환을 수행하였다. 그리고 변환된 solid 모델을 이용하여 CAD 기반으로 토공량을 산출할 수 있는 방법론을 구상하였다. 정립한 방법론을 적용한 solid 모델로부터 토공량을 자동 산출한 결과, 기존의 현황측량 결과로부터 산출한 토공량과 1.52%의 상대적 편차를 확인할 수 있었다. 추가적으로 방법별 공정 소요시간을 비교분석한 결과 60%의 소요시간 절감을 확인할 수 있었다. 이로부터 본 연구에서 제시한 기법은 토공량 산출을 위한 비용절감은 물론 건설공사 전 공정에서 주기적인 현장의 모니터링 등 스마트 건설관리를 위한 기술로써 활용이 기대된다.

승객 상해의 감소를 위한 승용차 조향주의 최적설계 (An Optimum Design of a Steering Column to Minimize the Injury of a Passenger)

  • 박영선;이주영;박경진
    • 한국자동차공학회논문집
    • /
    • 제3권1호
    • /
    • pp.33-44
    • /
    • 1995
  • As the occupant safety receives more attention from automobile industries. protection systems have been developed quite well. Developed protection systems must be evaluated through real tests in crash environment Since the real tests are extremely expensive. computer simulations are replaced for some prediction of the real test In the computer simulation. it is very crucial to express the real environment precisely in the modeling precess. The energy absorbing(EA) steering system has a very important rote in vehicle crashes because the occupant can hit the system directly. In this study. the EA steering system is modeled precisely. analyzed for the safely and designed by an optimization technology. First. the EA steering system is disassembled by parts and modeled by segments and joints. The segments are modeled by rigid bodies in motion and they have resistances in contact. Spring-damper elements and force-deflection curves are utilized to represent the joints. The body block test is cal lied out to validate. the modeling. When the test results are not enough for the detailed modeling. the differences between tests and simulations are minimized to calculate unknown parameters using optimization. The established model is applied to a crash simulation of a full-car model and tuned again. After the modeling is finished. components of the steering system are designed by an optimization algorithm. In the optimization process. the compound injury of a driver is defined and minimized to determine the chracteristics of the components. The second. order approximation algorithm has been adopted for the optimization.

  • PDF

축소형 회전익 항공기의 간략화된 동적 모델링 (Simplified Dynamic Modeling of Small-Scaled Rotorcraft)

  • 이환;이상기
    • 한국항공우주학회지
    • /
    • 제33권8호
    • /
    • pp.56-64
    • /
    • 2005
  • 모형헬리콥터를 이용한 무인항공기 설계를 위해 비선형 형태의 수학적 모델이 선행되어야 한다. 모형헬리콥터는 실기 헬리콥터에 비해 회전수가 훨씬 높으며 따라서 동특성도 실물기에 비해 훨씬 빠르다는 차이점이 있다. 본 논문에서는 축소형 헬리콥터의 수학적 모델링에 필요한 정식화과정으로서 복잡성을 최소화하면서도 실제의 동특성에 잘 부합하도록 각 구성요소별로 계산한 후 전체로 합산하는 방법을 제시하였다. 제자리 비행과 전진비행에서 수치계산을 통해 트림 값들을 계산하고 제자리 비행조건에서 선형 시스템을 해석하여 모형헬리콥터의 비행모드를 분석하였다. 계산결과 일반적인 경향은 몇 가지 작은 부분 이외에는 대체로 다른 연구결과와 비슷하였다. 이 과정을 검증하기 위해서 비행시험을 수행하여 시스템식별에 의한 결과와 비교하는 연구가 후속 수행될 예정이다.

Comparative study on the performance of Pod type waterjet by experiment and computation

  • Kim, Moon-Chan;Park, Warn-Gyu;Chun, Ho-Hwan;Jung, Un-Hwa
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제2권1호
    • /
    • pp.1-13
    • /
    • 2010
  • A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.

무인항공기체계의 개념설계에서 SysML 모델의 활용에 관한 연구 (On the Use of SysML Models in the Conceptual Design of Unmanned Aerial Vehicles)

  • 김영민;이재천
    • 한국통신학회논문지
    • /
    • 제37권2C호
    • /
    • pp.206-216
    • /
    • 2012
  • 최근의 전장 상황이 디지털 네트워크 중심의 전장체계를 기반으로 진화하면서, 개발해야 할 국방 전술무기체계가 첨단화, 복잡화, 다기능화 및 고도의 정밀화 등의 특성으로 가속화 되고 있다. 따라서 오늘날 국방 연구개발에서의 복잡도, 비용, 개발기간 및 위험 등을 효율적으로 관리하면서 성공적인 과제수행을 위해서는 시스템공학적인 설계 방법론의 적용이 필수불가결하게 되었다. 본 논문에서는 국방무기체계를 개발하기 위한 전체 수명주기 중 개념설계(conceptual design) 단계의 설계 활동에서 시스템공학 기법을 기반으로 하되 그래픽모델을 활용함으로써 여러 가지 장점을 추구하는 방안에 관해서 기술하고 있다. 특히 설계 대상시스템으로서 무인항공기 체계개발을 선택하였고, 모델링언어로서 표준 언어인 SysML을 적용함으로써 활용성을 증대시키고, 생성 된 모델들이 개념연구단계의 설계 활동에서 활용될 수 있는 방안에 관하여 논의하고 있다. 본 연구의 결과를 기반으로 향 후 추가 연구를 수행하면, 대형복합 국방무기시스템개발에서 전면적인 모델기반 시스템공학 방법론을 적용하기 위한 발전과정에 도움이 될 것으로 기대된다.