• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.54-61
• /
• 2003

$SnO_2$ gas sensor for the detection DMMP, simulant of nerve gas was fabricated and its characteristics were examined. Sensing materials were $SnO_2$ added by TEX>$\alpha$-$Al_{2}O_{3}$ with 0∼20wt.% and $In_{2}O_{3}$ with 0∼3wt.% and were physically mixed each material. They were deposited by screen printing method on alumina substrate. The sensor was consisted of sensing electrode with interdigit(IDT) type in front and a heater in back side. Its dimension was 7$\times$10$\times$0.6$\textrm{mm}^2$. Crystallite size 8t phase identification, specific surface area and morphology of fabricated $SnO_2$ powders were analyzed by X-ray diffraction(XRD), surface area analyzer(BET) and by a scanning electron microscope(SEM), respectively. Sensor was measured as flow type and sensor resistance change was monitored as real time using LabVIEW program. The best sensitivities were 75% at adding 4wt.% TEX>$\alpha$-$Al_{2}O_{3}$, operating temperature $300^{\circ}C$ and 87% at adding 2wt.% $In_{2}O_{3}$, operating temperature $350^{\circ}C$ to DMMP 0.5ppm. Response and recovery times were about 1 and 3 min., respectively. Repetition measurement was very good with $\pm$3% in full scale. As a result, operating temperature was lower TEX>$\alpha$-$Al_{2}O_{3}$ than $In_{2}O_{3}$, but sensitivity was higher $In_{2}O_{3}$ than $\alpha$-$Al_{2}O_{3}$.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.911-918
• /
• 2006

This study was conducted to evaluate the effect of the launder type on settling performance and hydrodynamic behavior within the two certain full-scale sedimentation basins (each flow rate/one basin; $10,000m^3/d$); one is the transverse typed launder(existing basin) and the other is building the finger type launder in combination with the longitudinal baffle. Comparative experimental investigations have been carried out through residual turbidity and particle concentration measurements in each effluent from two basins with the transverse and the finger type launders, respectively. From the experimental results, we could observe that turbidity removal rate in the finger type launder basin (modified basin) is about 30% higher than that in the transverse type launder basin (existing basin). Also, from the measurement of total particle concentration in each effluent, the removal efficiency was improved about 27% within modified basin compared to the existing basin. In order to explain the comparative experimental results and investigate the hydridynamic behavior within each basin in more detail, we conducted computational fluid dynamics (CFD) simulation and verified simulation results with acoustic Doppler velocimetry (ADV) technique. From the CFD simulation, it was investigated that extreme upward flow occurs underneath of the transverse launder. On the other hand, in the case of modified basin, the upward flow, which occurred in the beneath of launder, was much less than that in the existing basins.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.503-506
• /
• 2005

The PWR Nuclear Fuel assembly consists of more than 250 fuel rods that are supported by leaf springs in the cells of more than 10 Spacer Grids (SG) along the rod length. Since it is not easy to conduct mechanical tests on a full-scale model basis, the small-scaled rod bundle (5$\times$5) is generally used for various performance tests during the development stage. As one of the small-scaled tests, a flow test should be carried out in order to verify the performance of the spacer grid like the coolant mixing performance and to obtain the Flow-Induced Vibration (FIV) characteristics of the rod bundle over the specified flow range. A vibration test should be also performed to obtain the modal parameters of the bundle prior to the flow test. In this study, we want to develop the estimation procedure of the damping ratio for the small scaled test bundle. For the damping factor of the rod bundle and the grid case at the first vibration mode, as one of the vibration tests, a so-called pluck testing has been performed in air as a preliminary test prior to in-flow damping measurement test. Logarithmic decrement method is used for calculation of the damping ratio. Estimated damping ratio of the rod bundle is about 0.7% with reasonable error of 2% for the previous results. Nonlinear behavior of the rod bundle might be stem mainly Iron the rod-grid support configuration.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.88-92
• /
• 2013

The icebreaking research vessel (IBRV) ARAON had her second ice trial in the Arctic Ocean in the summer season of 2010. During the voyage, the local ice loads acting on the bow of the port side were measured using 14 strain gauges. These measurements were carried out in three icebreaking performance tests. To convert the measured strains into the local ice pressures, a finite element model of the instrumented area was developed. The influence coefficient method (ICM), which uses the influence coefficient from the finite element model, and the direct method, which uses the measured strain, were selected as the conversion methods. As a result, the maximum measured pressure was 1.236MPa, and the average difference between ICM and the direct method was about 5% for an area of $0.2m^2$. The pressure-area relationship of the measurement falls below the range of the existing pressure-area curve, which is due to the low ice strength of melted ice in the summer.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.621-642
• /
• 2021

In this paper, the subjective video quality assessment of the content quality was to examine by the assessors about the three content quality of HD, Up-scaling UHD, 4K UHD Native that is currently broadcasted. The comparative assessment was conducted using three types of TV sets, 55, 65, 75 inches, at a distance of 2.5 meters which is the distance of watching TV in general households. Among the participants who took part in the video quality evaluating experiment and the questionnaire survey, the answering data of the final 169 persons were adopted after removing the data of 4 persons who answered inadequately in the evaluation of the video quality. The effects of gender, preference of program genre, size of TV sets were analyzed statistically using SPSS 25.0 analysis package. In addition to these, the objective video quality assessment through the measuring instrument was performed, and compared with the results of subjective video quality assessment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.185-192
• /
• 2021

In this study, Full-scale hollow slab Mock-up with VPS(Void Plywood Slab System) was produced. Through Mock-up, the safety of the flat plate hollow slab against short-term sagging and long-term sagging is to be evaluated. The hollow rate of the mock-up specimen to which the hollow core slab was applied was designed to be 24%. When loading through concrete blocks, the most central part of the slab was deflection 8.88mm when loading. However, it shows a safe value compared to the reference value (l_n/240=17.93mm) for short-term deflection. As a result of 3 months of measurement of the mock-up experiment, the deflection at the center of the slab increased by 6.792mm from the initial deflection. In addition, it was found that the reference value by the load used suggested by KBC2016 was satisfied.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.4
• /
• pp.52-59
• /
• 2023

Flatness inspection of PC elements is normally conducted manually by inspectors at manufacturing sites. However, the manual inspection is error-prone and subjective, so it is necessary to develop a robust and efficient flatness measurement method. Recently, a few studies of laser scanner-based flatness inspection have been conducted. However, little attention on field applicability in terms of accuracy, time and cost has been paid. To tackle the limitation, this study aims to compare three sensing method including floor profiler, terrestrial laser scanner and total station for flatness inspection of PC elements. A series of experiments on two full-scale PC slabs were conducted and the results show that the laser scanning method is the most suitable for the PC elements flatness inspection in the aspects of accuracy, time and cost.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.9731-9737
• /
• 2014

Large scale secular registry or surveillance systems have been accumulating vast data that allow mathematical modeling of cancer incidence and mortality rates. Most contemporary models in this regard use time series and APC (age-period-cohort) methods and focus primarily on predicting or analyzing cancer epidemiology with little attention being paid to implications for designing cancer registry, surveillance or evaluation initiatives. This research models age-specific cancer incidence rates using logistic growth equations and explores their performance under different scenarios of data completeness in the hope of deriving clues for reshaping relevant data collection. The study used China Cancer Registry Report 2012 as the data source. It employed 3-parameter logistic growth equations and modeled the age-specific incidence rates of all and the top 10 cancers presented in the registry report. The study performed 3 types of modeling, namely full age-span by fitting, multiple 5-year-segment fitting and single-segment fitting. Measurement of model performance adopted adjusted goodness of fit that combines sum of squred residuals and relative errors. Both model simulation and performance evalation utilized self-developed algorithms programed using C# languade and MS Visual Studio 2008. For models built upon full age-span data, predicted age-specific cancer incidence rates fitted very well with observed values for most (except cervical and breast) cancers with estimated goodness of fit (Rs) being over 0.96. When a given cancer is concerned, the R valuae of the logistic growth model derived using observed data from urban residents was greater than or at least equal to that of the same model built on data from rural people. For models based on multiple-5-year-segment data, the Rs remained fairly high (over 0.89) until 3-fourths of the data segments were excluded. For models using a fixed length single-segment of observed data, the older the age covered by the corresponding data segment, the higher the resulting Rs. Logistic growth models describe age-specific incidence rates perfectly for most cancers and may be used to inform data collection for purposes of monitoring and analyzing cancer epidemic. Helped by appropriate logistic growth equations, the work vomume of contemporary data collection, e.g., cancer registry and surveilance systems, may be reduced substantially.

• The Journal of Korean Academy of Sensory Integration
• /
• v.16 no.3
• /
• pp.50-65
• /
• 2018

Objective : The purpose of this study is to analyze researches about sex education for children and adolescents with developmental disabilities in order to provide a basic data and a direction about sex education. Methods : For the systemic review, domestic and international research articles published from August 2008 to September 2018 were searched using the electronic databases PubMed, EBSCO host (CINAHL Plus with full text), Medline (ProQuest), RISS, and KISS. Keyword used for the search was 'Disability Disorder OR Autism (AND) AND (Effect OR Effectiveness)' for international papers and 'Disability AND Sex Education' for domestic papers. Total 15 articles were collected and analyzed in terms of participant, duration, type, contents, and teaching methods with PICO format. Results : In terms of level of evidence, majority was Level III evidence(60%). Most common contents of sex education were 'physical and growth' and 'relational skills'. Special education and occupational therapy were the field that sex education is provided most frequently. Effects of sex education identified were 'sex knowledge', 'sex attitudes', and 'inappropriate sexual behavior'. Conclusion : This study intend aimed to identify content, trends, and effects of sex education for children and adolescents with developmental disabilities in order to provide a basic data for clinical trial of sex education in occupational therapy practice. This study recommend further researches on the effects of sex education on occupational participation, occupational therapists' awareness of sexual activity of clients, and development of related measurement such as sexual development scale.

• Korean Journal of Psychosomatic Medicine
• /
• v.20 no.1
• /
• pp.50-58
• /
• 2012

Objectives : This study examined the selective deficits of executive function in patients with mild traumatic brain injury that in normal range of general intelligence level and aimed to analysis of the correlation between K-WAIS result and executive function. Methods : 59 subjects were included in this study, who were diagnosed as mild traumatic brain injury(MTBI) and they have visited in neuropsychiatric department of Wonkwang University Hospital during from March, 2005 to September, 2010. For measurement of general intelligence quotient, the Korean-Wechsler Adults Intelligence Scale(K-WAIS) was administered and for measurement of executive intelligence quotient(EIQ), Executive Intelligence Test(EXIT) was administered. Results : Of patients, 50.8% included at abnormal EIQ group. The patients of abnormal EIQ showed poorer full scale IQ(FIQ), performance IQ(PIQ) and in subscale that picture arrangement, digit symbol, digit span, block design, object assembly and comprehension were significantly different. In terms of relationships between K-WAIS and EIQ, FIQ and PIQ have positive correlation with EIQ. And in subscale, picture arrangement, digit symbol, digit span, block design, object assembly and comprehension show positive correlation with EIQ. Conclusion : This study suggest that MTBI patients with have normal range of general intelligence level may have deficit of executive function is common. The decline of FIQ, PIQ and some subscales of K-WAIS may suggest executive dysfunction in MTBI patients.