• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1232-1240
• /
• 2001

In this study. a computer simulation of the Korean High Speed Prototype Test Train was performed to investigate the dynamic behavior(running stability. safety and comfort) in detail design process. The simulation model which was prepared by ADAMS/Rail V10.l consists of power car and middle car assembly (2 motorized cars ＋ 3 trailer cars). The nonlinear analysis takes into account the full vehicle model including wheel/rail contact and the influence of disturbed track. Throughout the dynamic calculation of KHST on the straight and the curved track. accelerations in car body. ride comforts and wheel rail forces were investigated.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.3013-3022
• /
• 2013

SMART Highway 종방향 배리어 상위등급 SB5-B 대형차 충돌조건을 만족하면서 120km/h의 소형차충돌속도를 130km/h로 상향시킬 수 있는 가능성이 조사되었다. 실물 충돌시험의 결과에 Calibrate된 입력 변수를 적용한 컴퓨터 시뮬레이션을 통하여 120km/h 소형차 충돌속도에 대한 차량의 종방향(longitudinal)과 횡방향(transverse) 속도변화가 THIV 한계를 만족시킬 수 있도록 다양한 배리어 모델이 개선되었고 이 과정을 통해 결정된 배리어 모델이 SB5-B 실물충돌시험을 통과하였다. 통과된 배리어 모델 slip block-out 날개의 각도를 변화시키면서 120km/h 소형차 충돌속도의 상향가능성을 유한요소해석(FEA)을 통하여 조사하고 실물차량 충돌시험을 수행하였다. 소형차충돌속도 130km/h에 대한 표준시험 여건이 갖추어 진다면 소형차 충돌속도 130km/h로 상향시킬 수 있는 가능성이 높은 것으로 조사되었다.

• 문화기술의 융합
• /
• 제3권2호
• /
• pp.49-54
• /
• 2017

한국의 제네시스G80, 티볼리2017등이 부분적 자율주행차 시연을 진행 중이며 상용화에도 박차를 가하고 있다. 세계에서는 테슬라 'X'가 완전자율주행차를 구현하면서 테스트 과정을 완료하였다. 자율주행차가 점차적으로 상용화가 되면서 운전 취약자에 대한 해결책이 제시되고 편의성도 증가하면서 교통사고 비율도 감소할 것으로 예측된다. 반면에 자율주행차 사고 시, 윤리적 책임 문제 등 준비되어야 할 관련 법률은 매우 부족한 실정이며 자율주행차의 보안문제와 개인사생활의 침해도 매우 우려되는 실정이다. 본 논문에서는 현재 자율주행차에 대한 국내외 관련연구와 분석현황을 제시하고, 문제점에 대한 해결책과 활성화 모델을 제안한다.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.49-57
• /
• 2007

This paper proposes a traction control system (TCS) that uses a sliding mode wheel slip controller and a PID throttle valve controller. In addition, a yaw motion controller (YMC) is also developed to improve lateral stability using a PID rear wheel steering angle controller. The dynamics of a vehicle and characteristics of the controllers are validated using a proposed full-car model. A driver model is also designed to steer the vehicle during maneuvers on a split ${\mu}$ road and double lane change maneuver. The simulation results show that the proposed full-car model is sufficient to predict vehicle responses accurately. The developed TCS provides improved acceleration performances on uniform slippery roads and split ${\mu}$ roads. When the vehicle is cornering and accelerating with the brake or engine TCS, understeer occurs. An integrated TCS eliminates these problems. The YMC with the integrated TCS improved the lateral stability and controllability of the vehicle.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.116-126
• /
• 2010

The Korean rolling stock safety regulation stipulates that the collision deceleration of a car body should be maintained under average 5g and maximum 7.5g during train collisions. One-dimensional dynamic model of a full rake train, which is made up of nonlinear springs/bars-dampers-masses, is often used to estimate the collision decelerations of car bodies in a basic design stage. By the way, the previous studies have often used some average force-deformation curve for energy absorbing structures in rolling stock. Through this study, we intended to analyse how much the collision deceleration levels are influenced by the initial peak force modeling in the one-dimensional force-deformation curve. The numerical results of the one-dimensional dynamic model for the Korean High-Speed Train show that the initial peak force modeling gives significant effect on the collision deceleration levels. Therefore the peak force modeling of the force-deformation curve should be considered in one-dimensional dynamic model of a full rake train to evaluate the article 16 of the domestic rolling stock safety regulations.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 2부
• /
• pp.785-787
• /
• 2010

It is well known that most power steering systems obtain the power by a hydraulic mechanism. Therefore, it consumes more energy because the oil power should be sustained all the times. Recently, to solve this problem the Electric Power System(EPS) or Motor Driven Power System(MDPS) has widely equipped in passenger vehicles. In this research the concurrent simulation technique for an EPS system with MATLAB/SIMULINK and a full vehicle model has been developed. The dynamic responses of vehicle chassis and steering system are evaluated. Then, a full vehicle model interacted with EPS control is concurrently simulated with an impulsive steering wheel torque input to analyze the stability of 'free control' or hands free motion for SUV. This integrated method allows engineers to reduce the prototype testing cost and to shorten the developing period.

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1555-1560
• /
• 2013

칼럼 타입의 전동조향장치(MDPS) 시스템은 차량 안전성과 연료 효율 향상을 보장하기에 승용차에 보편적으로 장착하고 있다. 시스템 해석과 제어기 개발을 위해서는 보통 Mechanical Simulation사에서 제작한 CarSim 프로그램과 매트랩 시뮬링크의 두 프로그램을 이용하여 제어 알고리즘과 차량 모델이 결합되어 하나의 시스템처럼 동시에 동작하도록 시뮬레이션을 수행한다. 매트랩 시뮬링크의 MDPS 제어 시스템과 완전 차량 모델의 동시시뮬레이션 기술개발에 대한 구체적이 방법이 소개된 적이 없기에 본 연구에서 상세히 소개하기로 한다. 본 연구에서는 사인 파형의 조향핸들입력을 이용한 시뮬레이션 결과가 보여 지고 실험결과와 잘 비교되었다. 이러한 동시시뮬레이션 기술은 차량의 핸들링 성능 평가나 CMDPS 평가 수행 및 로직 튜닝을 위해 효과적으로 사용될 수 있다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.214-221
• /
• 1999

In this research, a power-assisted steering system is modeled as a part of a full vehicle dynamic model. The dynamic model of the steering system incorporates hydraulic and dynamic relations between major parts of a steering system, such as steering column, control valve, rack and pinion gear. Through an experimental setup of the steering system, the steering system model is validated. The steering model is included in a full vehicle dynamic model of a car, where kinematic relations between steering and suspension system are defined, and various simulations are performed to evaluate the performance of steering system in conjunction with overall dynamic performance of the vehicle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1003-1008
• /
• 2007

Compliance effect consideration method for real-time multibody vehicle dynamics is proposed using quasi-static analysis. The multibody vehicle model without bush elements is used based on the subsystem synthesis method which provides real-time computation on the multibody vehicle model. Reaction forces are computed in the suspension subsystem. According to deformation from the quasi-static analysis using reaction forces and bush stiffness, suspension hardpoint locations and suspension linkage orientation are changed. To validate the proposed method, quarter car simulations of McPherson strut and multilink suspension subsystems. Full car bump run simulations are also carried out comparing with the ADAMS vehicle model with bush elements. CPU times are also measured to see the real-time capabilities of the proposed method.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.170-176
• /
• 2008

Anti roll bar model for real time multibody vehicle dynamics model has been proposed using kinematic constraint. Anti roll bar have been modeled by kinematic relationship, and mass properties are neglected. Relative angle of torsion bar spring is computed by constraint about drop-link using Newton-Raphson iteration, and then the torque of torsion bar spring can be computed with the angle and torsion spring stiffness. Finally anti roll bar force acting on both knuckle can be calculated. To validate the proposed method, half car simulations of McPherson strut suspension and full car simulations are also carried out comparing with the ADAMS vehicle model with anti roll bar. CPU times are also measured to see the real-time capabilities of the proposed method.