• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.272-279
• /
• 1988

Kinetics of ascorbic acid destruction and browning were evaluated by the dynamic test using actual drying data in order to apply in the optimization of food dehydration. Radish was chosen as a test material because it has many typical quality characteristics during drying. Radish was dried in the cabinet dryer with being measured in moisture, food temperature, ascorbic acid and browning. Using moisture and temperature history, proposed kinetic model was integrated and parameters of the model were searched by the iteration scheme to show minimum discrepancy between predicted and experimental data. Ascorbic acid destruction and browning were represented by first and zero order reaction respectively. Arrhenius equation was used to describe temperature dependence. Several mathematical functions of moisture dependence were compared in the model simplicity and residual sum of square. Attained kinetic models were analyzed as functions of temperature and moisture. Rate of ascorbic acid destruction was low at high moisture content, increased with moisture decrease to show a maximum at the moisture of $9{\sim}12g/g$ dry solid, and then decreased up to full dryness. Browning rate increased with moisture decrease to show a sharp maximum at $4{\sim}6g/g$ dry solid and decreased with further moisture decrease.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.2
• /
• pp.53-60
• /
• 2016

In this paper, we introduce the implementation and test results of a new method of correlated result storage to achieve the full performance of the Daejeon hardware correlator. Recently, the observation of 8 Gbps speed, which is the maximum observational standard of KVN(Korean VLBI Network), has been performed. The correlation processing using the Daejeon hardware correlator is also required. Therefore, a new correlation result storage introduction has become necessary. The maximum correlation result output speed of the Daejeon hardware correlator is 1.4 GB/sec per 25.6 ms integration time. The conventional correlation result storage system can not cope with the maximum correlation output speed of the Daejeon hardware correlator, and the output speed is limited to 1/4. That is, among the four input ports of the Daejeon hardware correlator, the three inputs are limited to correspond to the observation rate of 1 Gbps. This new storage system uses the Gluster file system among many of the latest technologies used in storage systems. In tests that meet the maximum output rate of 1.4 GB/sec for the Daejeon hardware correlator, 350 MB/sec for each of the four optical outputs, resulting in 1.4 GB/sec in total.

• Journal of Bio-Environment Control
• /
• v.10 no.1
• /
• pp.42-49
• /
• 2001

This study was carried out to develop a fuzzy control technique of ventilation window for controlling a temperature in a greenhouse. To reduce the fuzzy variables, the inside air temperature shop was taken as one of fuzzy variables, because the inside air temperature variation of a greenhouse by ventilation at the same window aperture is affected by difference between inside and outside air temperature, outside wind speed and the wind direction. Therefore, the antecedent variables for fuzzy algorithm were used the control error and its slop, which was same value as the inside air temperature slop during the control period, and the conclusion variable was used the window aperture opening rate. Through the basic and applicative control experiment with the control period of 3 minutes the optimum ranges of fuzzy variables were decided. The control error and its slop were taken as 3 and 1.5 times compared with target error in steady state, and the window opening rate were taken as 30% of full size of the window aperture. To evaluate the developed fuzzy algorithm in which the optimized 19 rules of fuzzy production were used, the performances of fuzzy control and PID control were compared. The temperature control errors by the fuzzy control and PID control were lower than 1.3$^{\circ}C$ and 2.2$^{\circ}C$ respectively. The accumulated operating size of the window, the number of operating and the number of inverse operating for the fuzzy control were 0.4 times, 0.5 times and 0.3 times of those compared with the PID control. Therefore, the fuzzy control can operating the window more smooth and reduce the operating energy by 1/2 times of PID control.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.545-558
• /
• 2003

It is expected that per-user customized services are widely used in next generation Personal Communication Network. The ultimate goal for personalized service is the Virtual home Environment (VHE) providing ´same-look-and-feel´ services for the subscriber wherever he roams to. To provide personalized services for each call, per-user service profiles are frequently referenced, so efficient service profile management is essentially required. To realized the VHE, typically two schemes, can be employed; One is Intelligent Network based service control and the other is a full replication scheme that always replicates profile in user´s current zone. The first scheme is referred as Central scheme and th second scheme is the modified replication scheme of IMT-2000, we refer to as Follow-Me Replication Unconditional (FMRU). Since the Central scheme only depends on the service cal rate and the FMRU is merely dependent on the movement rate, it is apparent that FMRU scheme outperforms the Central scheme if the call to mobility ratio (CMR) is large, and vice versa. In this paper, we propose a new service profile replication schemes, Adaptive Follow-Me Replication (AFMR) that determine replication automatically according to the user´s CMR. We compared the performance of the AFMR with the non-adaptive Follow-Me Replication unconditional on Demand (FMRUD) scheme. Performance results indicate that as the CMR of a user changes AFMR adapts well compared to the existing schemes.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.77-80
• /
• 2007

Purpose: Purpura fulminans is a rare but rapidly progressive, serious, often life-threatening disorder in childhood, which is complicated with septic shock or disseminated intravascular coagulopathy during acute infection. It occurs first as acute-onset petechial rash, and spreads rapidly into full thickness skin and soft tissue necrosis. In the past, it had high mortality rate, up to 80%, but recently, survival rate has increased due to early diagnosis, and rapid advancement of critical care and antibiotics. From our experiences of PF management, we would like to review the pathophysiology and suggest the surgical treatment guideline about meningococcal induced purpura fulminans. Methods: Two cases of purpura fulminans over the last 3 years were reviewed retrospectively about reconstructive management. After they were treated resuscitative management initially by the critical intensive care, reconstructive surgery was performed by plastic surgeon as soon as the patients were vitally and mentally stable. Results: There were 6 procedures in case 1, and 3 procedures in case 2. The mean delayed period from admission with sepsis to the first surgical debridement was 24 days and 42 days, respectively. Total hospitalization period was 103 days and 69 days, respectively. All of them were treated with debridement and split thickness skin graft, but delayed debridement was superior to early one in the point of preserving much more tissues. Conclusion: From our experience, we suggest that conservative therapy to the wounds appears to be the best tool in the initial vitally unstable period in order to preserve as much tissues and functions as possible if no active inflammation and compartment syndrome are detective.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.576-584
• /
• 2011

Purpose: The shape and location, the amount of the wound and the characteristics of the remaining tissues are known to influence wound contraction. The previous studies using small animals have not been an appropriate model because the wound healing mechanisms and skin structures are different from those of the human. The purpose of this study is to evaluate wound contraction according to the shape and location of the wound using a $Micropig^{(R)}$. Methods: Four $Micropigs^{(R)}$ (Medikinetics, Pyeongtaek, Korea) that were 10 months of age weighed 25 kg were used. Full thickness skin defects were made by clearing all the tissues above the fascial layer in the shape of square, a regular triangle and a circle of 9 $cm^2$ each on the back around the spine. Eight wounds were created on the back of each pig, 50 mm apart from each other. The randomly chosen wound shapes included 11 squares, 11 regular triangles, and 10 circles. Wound dressing was done every other day with polyurethane foam. The wound size was measured using a Visitrak $Digital^{(R)}$ (Smith & Nephew, Hull, UK) on every other day after surgery from day 2 to day 28. A biopsy was performed on day 3, and 1, 2, 3 and 4 weeks to investigate the degree of acute and chronic inflammation, the number of microvesssel and myofibroblast density using H & E stain and immunohistochemistry. The wound contraction rate was calculated to figure out the differences among each of the shapes and the locations. Results: The ultimate shape of the circle wound was oval, and that of the regular triangle and square were stellate. The maximum contraction rate was obtained on 8 to 10 days for all the shapes, which corresponds with the immunohistochemical finding that myofibroblast increases in the earlier 2 weeks whereas it decreases in the later 2 weeks. Epithelialization was seen in the wound margin on day 7 and afterwards. The final wound contraction rates were highest for the regular triangle shapes; however, there were no statistically significant differences. The wound contraction rates by locations showed statistically significant differences. The wound in the cephalic area presented more contractions than that of the wounds in the caudal area. Conclusion: The location of a wound is more important factor than the wound shape in wound contraction.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.721-725
• /
• 2010

Purpose: The survival of composite graft is dependent on three steps, (1) plasmatic imbibitions, (2) inosculation, and (3) neovascularization. Among the many trials to increase the survival rate of composite graft, prostaglandin E1 (PGE1) has beneficial effects on the microcirculatory level with vasodilating, antithrombotic, anti-inflammatory and neoangiogenic properties. Lipo-PGE1 which is lipid microspheres containing PGE1 had developed to compensate the systemic and local side effects of PGE1. This study was proposed to determine whether Lipo-PGE1 administration enhanced the survival of composite graft through neovascularization quantitatively in a rabbit ear model. Methods: Fourteen New Zealand White Rabbits each weighing 3~4 kg were divided in two groups: (1) intravenous Lipo-PGE1 injection group and (2) control group. A $2{\times}1\;cm$ sized, full-thickness rectangular composite graft was harvested in each auricle. Then, the graft was reaaproximated in situ using a 5-0 nylon suture. For the experimental group, $3{\mu}g$/kg/day of Lipo-PGE1 ($5{\mu}g$/mL) was administered intravenously through the marginal vein of the ear for 14 days. The control group was received no pharmacologic treatment. On the 14th postoperative day, composite graft of the ear was harvested and immunochemistry staining used Monoclonal mouse anti-CD 31 antibody was performed. Neoangiogenesis was quantified by counting the vessels that showed luminal structures surrounded by the brown color-stained epithelium and counted from 10 random high-power fields (400x) by independent blinded observer. Statistical analysis (Wilcoxon Signed Ranks test for nonparametric data) was performed using SPSS v12.0, with values of p<0.05 considered significant. Results: The mean number of the microvessels was $15.48{\pm}8.65$ in the experimental group and $9.82{\pm}7.25$ in the control group (p=0.028). Conclusion: The use of Lipo-PGE1 facilitated the neoangiogenesis, resulted in the improvement of the survival rate of graft. On the basis of this results, we could support wider application of Lipo-PGE1 for more effective therapeutic angiogenesis and successful survival in various cases of composite graft in the human.

• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.365-373
• /
• 2004

This survey was conducted on KOSEF's research internship awardees (FY 1998 to 2001) in order to investigate the employment status of doctoral and master's degree holders in Geosciences in Korea. An unemployment rate of KOSEF's research internship awardees (FY 1998 to 2001) was 32.0 percent for the doctoral and master's degree holders in Geosciences. 37.2 percent of employed doctoral and master's degree holders only obtained employment as a full-time and part-time status in industry, research institutions and academia in Korea. The U.S. Census Bureau conducted the 2001 survey of doctoral recipients (SDR). Based on this survey, most U.S. doctoral holders were employed and an unemployment rate for 2001 was only 1.3 percent of the Geosciences doctoral holders. KOSEF or related academic societies should be able to provide a more precise information of the employment status for new doctoral and master's degree holders in Geosciences by conducting the survey of doctoral and master's degree recipients. The results of this survey will be used to understand and to predict trends in employment opportunities in Geosciences for doctoral and master's degree holders.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.671-679
• /
• 2008

The effect of Pre-cooled Turbojet Engine installation and nozzle exhaust jet on Hypersonic Turbojet EXperimental aircraft(HYTEX aircraft) were investigated by three-dimensional numerical analyses to obtain aerodynamic characteristics of the aircraft during its in-flight condition. First, simulations of wind tunnel experiment using small scale model of the aircraft with and without the rectangular duct reproducing engine was performed at M=5.1 condition in order to validate the calculation code. Here, good agreements with experimental data were obtained regarding centerline wall pressures on the aircraft and aerodynamic coefficients of forces and moments acting on the aircraft. Next, full scale integrated analysis of the aircraft and the engine were conducted for flight Mach numbers of M=5.0, 4.0, 3.5, 3.0, and 2.0. Increasing the angle of attack $\alpha$ of the aircraft in M=5.0 flight increased the mass flow rate of the air captured at the intake due to pre-compression effect of the nose shockwave, also increasing the thrust obtained at the engine plug nozzle. Sufficient thrust for acceleration were obtained at $\alpha=3$ and 5 degrees. Increase of flight Mach number at $\alpha=0$ degrees resulted in decrease of mass flow rate captured at the engine intake, and thus decrease in thrust at the nozzle. The thrust was sufficient for acceleration at M=3.5 and lower cases. Lift force on the aircraft was increased by the integration of engine on the aircraft for all varying angles of attack or flight Mach numbers. However, the slope of lift increase when increasing flight Mach number showed decrease as flight Mach number reach to M=5.0, due to the separation shockwave at the upper surface of the aircraft. Pitch moment of the aircraft was not affected by the installation of the engines for all angles of attack at M=5.0 condition. In low Mach number cases at $\alpha=0$ degrees, installation of the engines increased the pitch moment compared to no engine configuration. Installation of the engines increased the frictional drag on the aircraft, and its percentage to the total drag ranged between 30-50% for varying angle of attack in M=5.0 flight.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1161-1175
• /
• 2018

An unexpected event could be easily followed by a large secondary accident due to the limitation in sight of drivers in road tunnels. Therefore, a series of automated incident detection systems have been under operation, which, however, appear in very low detection rates due to very low image qualities on CCTVs in tunnels. In order to overcome that limit, deep learning based tunnel incident detection system was developed, which already showed high detection rates in November of 2017. However, since the object detection process could deal with only still images, moving direction and speed of moving vehicles could not be identified. Furthermore it was hard to detect stopping and reverse the status of moving vehicles. Therefore, apart from the object detection, an object tracking method has been introduced and combined with the detection algorithm to track the moving vehicles. Also, stopping-reverse discrimination algorithm was proposed, thereby implementing into the combined incident detection processes. Each performance on detection of stopping, reverse driving and fire incident state were evaluated with showing 100% detection rate. But the detection for 'person' object appears relatively low success rate to 78.5%. Nevertheless, it is believed that the enlarged richness of image big-data could dramatically enhance the detection capacity of the automatic incident detection system.