• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.3
• /
• pp.122-127
• /
• 1987

This experiment was carried out to investigate the effect of shading degrees (0:full sunlight, 25, 50 and 75%) on the crop growth rate (CGR), net assimilation rate (NAR) and photosynthetic activity of grasses for obtaining the basic data on the development, management and utilization of pasture in the forest. For the test, different artificial shading houses were established and pasture species used in this study were orchardgrass, timothy, perennial ryegrass and ladino clover. The experiment was performed at Livestock Experiment Station, Suwon, in 1984-'85. The results obtained are summarized as follows. 1. The highest CGR was obtained at 0% (full sunlight) and 25% of shading, followed by 50 and 75% of shading degrees, in that order. CGR of orchardgrass and perennial ryegrass were higher than those of timothy and ladino clover. 2. NAR was significantly decreased as the shading degrees increased. The highest NAR was observed at perennial ryegrass plot. 3. The photosynthetic activity during summer season was the highest at 25% of shading, followed by 50, 0 and 75% of shading degrees. While, the photosynthetic activity during fall season was the highest at 25% of shading, followed by 50, 0 and 75% of shading degrees, in that order. Those of orchardgrass and perennial ryegrass were remarkably higher than that of timothy. 4. A significant positive correlation was obtained in the relationship between CGR and NAR of main grasses, regardless of pasture species and investigated date.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.13-19
• /
• 2008

In this paper, we propose a new CL-OSTBC (Closed Loop Orthogonal Space-Time Block Code) scheme for four transmit antennas and compare the scheme with existing closed loop schemes on the performance of BER (Bit Error Rate). In the proposed scheme, a transmitter receives channel feedback information and combines modulated symbols by the symbol combiner, and transmits the symbols encoded by the space-time block encoder. As a result, the proposed scheme achieves full-rate and maximal channel gains by more efficient utilization of the channel feedback information. Moreover, the scheme can reduce computation complexity by using a linear detector. Simulation results on the BER performance show that the proposed CL-OSTBC scheme outperforms existing CL-OSTBC schemes.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.587-598
• /
• 2002

In multicast environment, the main objective of group key management is to provide security services to group communications by sharing a single group key among all the members of the group and subsequently encrypting and decrypting all the communication messages exchanged among the members of the group. Up to now, there has been no effort to develop group key management mechanism that considers the rate of users' join/leave operations. Hence, in this research, we propose group key management mechanisms that consider the rate of user's join/leave operations. We also define a new tree structure called variable tree which is much more flexible than full regular trees and show that variable trees are more efficient than full regular trees for group key management. Especially, we propose an algorithm that minimizes the necessary number of rekey messages according to the rate of join and leave operations. We also shows that if the rate of leave operation is greater than 50%, then the tree structure with degrees 2 or 3 are the optimal structures.

• Korean Journal of Materials Research
• /
• v.32 no.3
• /
• pp.115-124
• /
• 2022

Porous basalt aggregate is commonly used in roadbed engineering, but its application in concrete has rarely been studied. This paper studies the application of porous basalt in concrete. Porous basalt aggregate is assessed for its effects on mechanical strength and durability of prepared C50 concrete; because it has a hole structure, porous basalt aggregate is known for its porosity, and porous basalt aggregates can be made full of water through changing the content of saturated basalt; after full-water condition is achieved in porous basalt aggregate mixture of C50 concrete, we discuss its mechanical properties and durability. The effects of C50 concrete prepared with basalt aggregate on the compressive strength, water absorption, and electric flux of concrete specimens of different ages were studied through experiments, and the effects of different replacement rates of saturated porous basalt aggregate on the properties of concrete were also studied. The results show that porous basalt aggregate can be prepared as C50 concrete. For early saturated porous basalt aggregate concrete, its compressive strength decreases with the increase of the replacement rate of saturated aggregate; this occurs up to concrete curing at 28 d, when the replacement rate of saturated basalt aggregate is greater than or equal to 40 %. The compressive strength of concrete increases with the increase of the replacement rate of saturated aggregate. The 28 d electric flux decreases with the increase of the replacement rate of saturated aggregate, indicating that saturated porous basalt aggregate can improve the chloride ion permeability resistance of concrete in later stages.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.603-610
• /
• 1998

This paper develops a 7 DOF vehicle model to study the effects of the active suspension on ride. The model is used to derive a control law for the active suspension using a full state linear optimal control technique. A wheelbase preview type active suspension is also considered in the control law derivation. The time delay between wheelbases is approximated using Pade approximation technique. The ride model is extended to a 14 DOF handling model. The 14 DOF handling model includes lateral, longitudinal, yaw and four wheel spin motions in addition to the 7 DOF ride model. A control law which is derived considering only ride related parameters is used to study the effects of the active suspension on a vehicle handling. J-turn maneuver simulation results show that the active suspension has a slower response in lateral acceleration and yaw rate, a bigger steady state lateral acceleration and an oversteer tendency. Lane changing maneuver simulation results show that the active suspension has a little bigger lateral acceleration but a much smaller roll angle and roll motion. Braking maneuver simulation results show that the active suspension has a much smaller pitch angle and pitch motion.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.367-370
• /
• 2006

This paper deals with the modeling and simulation of the internal flowfield in a valveless airbreathing pulse detonation engine (PDE) currently under experimental development at the U.S. Naval Postgraduate School. The system involves no valves in the airflow path, and the isolation between the inlet and combustor is achieved through the gasdynamics in an isolator. The analysis accommodates the full conservation equations in axisymmetric coordinates, and takes into account variable properties for ethylene/oxygen/air system. Chemical reaction schemes with a single progress variable are implemented to minimize the computational burden. Detailed flow evolution during a full cycle is explored and propulsive performance is calculated. Effect of initiator mass injection rate is examined and results indicate that the mass injection rate should be carefully selected to avoid the formation of recirculation zones in the initial cold flowfield. Flow evolution results demonstrate a successful detonation transmission from the initiator to the combustor. However, strong pressure disturbance may propagate upstream to the inlet nozzle, suggesting the current configuration could be further refined to provide more efficient isolation between the inlet and combustor.

• Journal of the Korean Dietetic Association
• /
• v.3 no.1
• /
• pp.63-73
• /
• 1997

This study was conducted to evaluate the industry foodservice management practices and to suggest guidelines for the effective foodservice management. The survey for the analysis was conducted through the questionnaires to dietitians. They were divided into two groups : the site color worker and the blue color worker. The questionnaires were received for a response rate of 73.2%. Statistical data analysis was completed using the SAS programs for descriptive analysis, $x^2$ test, T-test, F-test, and Fisher's LSD. The results of the study can be summarized as follows : 1) The level of education of dietitians and food cost in the employee feeding operations for the blue color worker was lower than the employee feeding operations for the white color worker. 2) The labor productivity indices were not significantly different according to types of workers. But in the employee feeding operations for the blue color worker, full-time foodservice employees worked more than 10.7 hour per week than their counterpart. This indicates the full-time foodservice employees in the employee feeding operations for the blue color worker performed more loaded work compared to the employee feeding operations for the white color worker. 3) Equipped rate of facilities in the employee feeding operations for the blue color worker was low especially in the food preparation and cooking processes.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.856-859
• /
• 2002

This paper proposes a high-performance VLSl architecture using distributed arithmetic for higher-order FIR filters with complex coefficients. For the purpose of realizing high sampling rate with small latency in high-order filters, we apply distributed arithmetic[1］. Moreover, in order to decrease drastically the power dissipation, the structure applying not ROM's but optimum function circuits which we have previously proposed, is utilized［2]［3］. However, this structure increases in the number of adders as compared to the conventional structure applying ROM's. In order to realize a more effective method for further higher-order filter, we propose newly an implementation applying two methods which have large effects on the unit using the adders. First , we propose an implementation applying SFAs(Serial Full Adders) and SFSs(Serial Full Subtractors). Second, we propose a structure applying proposed 4-2 adders. Finally, it is shown that the proposed architecture is an effective way to realize low power dissipation and small latency while the sampling rate is kept constant for further higher-order filters with complex coefficients.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.1 s.307
• /
• pp.1-8
• /
• 2006

This paper presents a fast full search algorithm for motion estimation applicable to multiple reference images. The proposed method is an extended version of the rate constrained successive elimination algorithm (RSEA) for multiple reference frame applications. We will show that motion estimation for the reference images temporally preceding the first reference image can be less intensive in computation compared with that for the first reference image. for computational reduction, we will drive a new condition to lead the smaller number of candidate blocks for the best matched block. Simulation results explain that our method reduces computation complexity although it has the same quality as RSEA.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.293-298
• /
• 2003

In this paper. we propose a fast search algorithm for nearest neighbor vector quantization (NNVQ). The proposed algorithm rejects those codewords which can not be the nearest codeword and reduces the search range of codebook. Hence it reduces computational time and complexity in encoding process, while it provides the same SD performance as the conventional full search algorithm. We apply the proposed algorithm to the adaptive multi-rate (AMR) speech coder and a general vector quantizer designed by LBG. algorithm. Simulation results show effectiveness of the proposed algorithm.