• Structural Monitoring and Maintenance
• /
• v.5 no.3
• /
• pp.417-428
• /
• 2018

In this paper, various model reduction methods were assessed using a shear frame, plane and space truss structures. Each of the structures is one-dimensional, two-dimensional and three-dimensional, respectively. Three scenarios of poor, better, and the best were considered for each of the structures in which 25%, 40%, and 60% of the total degrees of freedom (DOFs) were measured in each of them, respectively. Natural frequencies of the full and reduced order structures were compared in each of the numerical examples to assess the performance of model reduction methods. Generally, it was found that system equivalent reduction expansion process (SEREP) provides full accuracy in the model reduction in all of the numerical examples and scenarios. Iterated improved reduced system (IIRS) was the second-best, providing acceptable results and lower error in higher modes in comparison to the improved reduced system (IRS) method. Although the Guyan's method has very low levels of accuracy. Structures were classified with the excitation frequency. High-frequency structures compared to low-frequency structures have been poor performance in the model reduction methods (Guyan, IRS, and IIRS).

• Journal of the Korean Solar Energy Society
• /
• v.28 no.4
• /
• pp.35-42
• /
• 2008

Besides genuine skin and clothes, it is called that building is third skin for us. That means the skin of buildings is the most important factor for our man-made environment. The issues in designing the building envelope include the insulation, infiltration, ventilation and bridging in windows. Getting light into the space safely and providing views to outdoor, additionally, are key things with the building envelope design. A deep-rooted preference for full view is still alive with large area of glass. Balcony expansion is legalized in apartment houses, which causes lots of environmental problems. Without balcony space, the adjacent space to unshaded window is exposed to the direct sun. A window can have many layers and the inner space can be utilized with an automatic blind system. Recently, the refurbished version of a double-glazed window system has been developed for the purpose of minimizing energy loss occurred around windows. For the better daylight control with equipped blind system, a set of adjustment technique of blind slats was tested in a mock-up building and recommended the detail operation. Not surprisingly, the optimized blind system can be oriented to enhance the uniformity in light distribution and direct glare from the sky as well..

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.1
• /
• pp.21-28
• /
• 2016

A typical heat exchanger, found in many industrial sites, is made up of a large number of unitary cells, which causes difficulties when carrying out full-scale three-dimensional numerical simulations of the heat exchanger to analyze the aero-thermal performance. In the present study, a three-dimensional numerical study using a porous media model was carried out to evaluate the performance of the heat exchanger modelled in two different ways : full-scale and simplified. The pressure drop in the air side and gas side along with the overall heat transfer rate were calculated using a porous media model and the results were then compared to results obtained with a one-dimensional flow network model. The comparison between the results for two different geometries obtained using a porous media model and a one-dimensional flow network model shows good agreement between the simplified geometry and the one-dimensional flow network model. The full-scale geometry shows reasonable differences caused by the geometry such as sudden expansion and contraction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.1031-1040
• /
• 1997

This study was done to analyze the body surface developments of armhole area. The major conclusions of this study are: 1. The body surface developments showed the characteristics of expansion and contraction of body at armhole area. By arm movements, front armhole lines on the body surface developments of upper arm were slow going, but back armhole lines were full and round. As a whole, armhole line of the back torso was swollen outside especially at backarmpit point area, it seemed like a line of raglan sleeve. 2. Regression Analysis was carried out to adapt armhole line on the upper arm and upper body to bodice and sleeve pattern, following the axillary circumference line and chest breadth line changed to the basic pattern form. As the result, armhole lines of 90$^{\circ}$ and 135-180$^{\circ}$ movements deviated from those of standard posture. U-type, clear armhole curve of standard posture turned to V-type, slanting line by arm movements.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1514-1519
• /
• 1999

This paper presents two flexible alternatives to the decoupled load flow(DCL) method. The proposed load flow methods can improve the convergence profiles of the DCL by reflecting in part the effects of the off-diagonal terms in the Jacobian at minimal costs. They can improve the convergence characteristics especially when the power system operating states deviate from the conditions required for stable convergence of the DCL and the P-Q coupling becomes significant. Two algorithms are obtained from the expression of the full Newton-Raphson load flow (NRL) method by successively diminishing the effects of the off-diagonal submatrices in the Jacobian. In the process of simplification, the Neuman series expansion is utilized. Test results show promising performances of the proposed algorithms in their convergence characteristics both in number of iterations and overall convergence speeds. Proposed algorithms are expected to provide flexible alternatives to the NRL when the DCL experiences convergence problems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1391-1394
• /
• 2007

In order for Hypoid gear development. Gears are required to sustain heavy loads or on applications where the gear box is made or a material with a different coefficient of thermal expansion form that or the gears and shafts, it is desirable to make a deflection and contact check under load. The deflection test is performed in the actual gear mounting using completely processed gear. This test should cover the full operating range of gear loads from no load to peak load. Under peak load the contact pattern should extend to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.7
• /
• pp.181-205
• /
• 1997

It is expected that Korean restaurant business will become one of the most important contributors to the notion's economy by the year 2000. As the many visible and invisible trade barriers are tumbled down and market opening to foreign competition expedites, a strategy to solidify the competitiveness of the restaurant industry is urgently needed. Some of the strateges that need to sharpen the competity edge are as follows: 1. Development of restaurant business management knowhow and enhancement of information gathering capability. 2. Development of its own unique brand of food and service tailored to many different tastes of clientele. 3. Promotion of the industry's globalization efforts with the development of local restaurant brand & Korean traditional foods and with the expansion of foreign investment. 4. Reinforcement of staff training and provision of a compensation package to attract qualified personnel. 5. deregulation of many anachronistic laws and restrictions with government's full support for the industry to realize what it's supposed to be in the 21st century.

• Korean Institute of Interior Design Journal
• /
• no.34
• /
• pp.53-60
• /
• 2002

It was investigated on the logical inter-relationship with plastic thinking systems in interior space constitution. Followings were produced the conclusion of study from the plastic thinking. First of all plastic thinking could be interpreted as the stage-oriented process from various approaching by intuitional, experimental techniques through the expansion of thinking capability with linguistic activities. And also interior space constitution could be extracted from the plastic language relating with design concept, could be extracted the design element by processing on the formation process based on material's physical properties. Next, space perception and constitution should be followed the massive perception between empty and full space based on the interrelationship. Additionally the constitution of interior space could be established through axis, integrated with detail functions. Interior space constitution could be accomplished on the study of material based on the characteristics of material, planned to coincide with the space's characteristics in selection for texture.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.46
• /
• pp.237-261
• /
• 2010

Resent East Asian economic growth has lead the increase of global trade volume and global logistics to the level of full-scale development as aiming to have quantitative growth in world trades in one hand and increasing mutual dependence among the East Asian Economic Bloc on the other. In other words, East Asian economic current growth is going along as connecting with 2 different process that are the increase of global trade volume and the technical development of global logistics system. And mutual dependence among the East Asian Economic Bloc shows the deepening trend in production and consumption. While having the flow of expansion in East Asian trade volume and logistics network in mind, this paper will study on trend in East Asian intra-trade and then study on change & tasks in the East Asian Logistics system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.266-281
• /
• 2017

Hydroelastic interactions of a deformable floating body with random waves are investigated in time domain. Both hydroelastic motion and structural dynamics are solved by expansion of elastic modes and Fourier transform for the random waves. A direct and efficient structural analysis in time domain is developed. In particular, an efficient way of obtaining distributive loads for the hydrodynamic integral terms including convolution integral by using Fubini theory is explained. After confirming correctness of respective loading components, calculations of full distributions of loads in random waves are expedited by reformulating all the body loading terms into distributed forms. The method is validated by extensive convergence tests and comparisons against the counterparts of the frequency-domain analysis. Characteristics of motion/deformation responses and stress resultants are investigated through a parametric study with varying bending rigidity and types of random waves. Relative contributions of componential loads are identified. The consequence of elastic-mode resonance is underscored.