• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.519-523
• /
• 2003

This paper describes the communication system of sequencing sorter. Generally sequencing sorter is a machine that sorts mails by delivery order. And designed sequencing sorter is composed of 5 physical modules. So, it is necessary to communicate with each module and to control this communication. A computer called Machine Management Computer, controls this. This paper is about the communication system with MMC and module controllers. This is PC-based, asynchronous full-duplex 4-wire serial systems. 3 protocol layers are presented and stop-and-wait flow control is adopted. Because designed sequencing sorter has to be operated high speed about 27,000 letters per hour, we analyzed the network traffic in the worst case. So, we could find that the communication system has to use above 115,200bps speed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.31-34
• /
• 2018

최근 유무선 트래픽의 지속적인 증가에 대응하기 위해선 가입자 네트워크의 양적 확충은 물론, 새로운 인터넷 기술을 개발하고 그 구조를 재설계하는 등의 투자가 이루어지고 있다. 특히 차세대 미디어 서비스 등의 인터넷 수요 및 대역폭에 대한 요구가 증가로 인하여 가입자 망 진화의 필요성이 계속해서 이야기되고 있다. 정부에서는 10기가 인터넷 상용화를 목표로 '10기가 인터넷 상용화 촉진 선도 시범 사업'을 추진하고 있으며, KT와 SK브로드밴드 등 주요 통신사에서도 10Gbps 인터넷 상용화를 추진하고 있다. 이에 케이블 사업자도 인터넷 경쟁력 확보를 위해 HFC망 진화 방안에 대한 연구가 필요하다. 우선 상하향 10Gbps 전송이 가능한 DOCSIS 3.1 도입을 위해 망 장비 교체나 업그레이드 없이 주파수 확보가 이루어 져야 하며, 상향 전송 속도 확대를 위해 북미에서 표준화 진행중인 FDX(Full-Duplex) DOCSIS 도입을 위해 망 구조를 개선해야 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.429-438
• /
• 1986

In this paper we have designed and implemented a real-time, full-duplex SBC (sub-band coding) codec at 16kbps using a high speed digital signal processor, NEC 7720. The SBC codec employs a QMF(quadrature mirror filter) filter bank based on the tree structures of two-band analysis-synthesis pairs to partition speech signal into 4 octabe bands. Computer simulation has been done to investigate the effect of fixed-point computation of the NEC 7720. Three different performance measures, the conventional signal-to-noise ratio, the informal listening test, and an LPC(linear predictive coding)distance measure, have been used in this simulation. The necessary parameters have been optimized through the simulation. The developed hardware and software have been tested in real-time operation using a hardware emulator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.7-15
• /
• 2007

In wireless communication networks, single-radio single-channel architecture degrades throughput and end-to-end delay due to half-duplex transmission of wireless node and route intra interference. Also, In contention-based MAC (Medium Access Control) architecture, channel contention reduces throughput and packet collision enlarges end-to-end delay. In this paper, we use multi-radio multi-channel architecture which will make wireless node to operate in full duplex mode, and exclude route intra interference. Based on this architecture, we propose a new link metric, ccf which reflects the characteristics of a contention-based wireless link, and propose a routing path metric MCCR considering channel switching delay and route intra interference. MCCR is compared with MCR by simulation, the performance of a route established by MCCR outperforms the performance of a route by MCR in terms of throughput and end-to-end delay.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.352-363
• /
• 2012

In this paper, we study the role of cooperative relays to provide and improve secure communication rates through decodeand-forward (DF) strategies in a full-duplex multiple relay network with an eavesdropper. We consider the DF scheme as a basis for cooperation and propose several strategies that implement different versions of this scheme suited for cooperation with multiple relays. Our goal is to give an efficient cooperation paradigm based on the DF scheme to provide and improve secrecy in a multiple relay network. We first study the DF strategy for secrecy in a single relay network. We propose a suboptimal DF with zero forcing (DF/ZF) strategy for which we obtain the optimal power control policy. Next, we consider the multiple relay problem. We propose three different strategies based on DF/ZF and obtain their achievable secrecy rates. The first strategy is a single hop strategy whereas the other two strategies are multiple hop strategies. In the first strategy, we show that it is possible to eliminate all the relays' signals from the eavesdropper's observation (full ZF), however, the achievable secrecy rate is limited by the worst source-relay channel. Our second strategy overcomes the drawback of the first strategy, however, with the disadvantage of enabling partial ZF only. Our third strategy provides a reasonable compromise between the first two strategies. That is, in this strategy, full ZF is possible and the rate achieved does not suffer from the drawback of the first strategy. We conclude our study by a set of numerical results to illustrate the performance of each of the proposed strategies in terms of the achievable rates in different practical scenarios.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.7
• /
• pp.26-40
• /
• 2010

We propose a new routing protocol, MCQosR, that is based on bandwidth estimation, admission control, and a routing metric, MCCR - suitable for wireless ad-hoc networks with multiple radios and channels. To use the full capacity of a wireless link, we assume a node with multiple radios for full duplex operation, and a radio using multiple channels to exclude route-intra interference. This makes it possible to use the capacity of a wireless link. Then, to provide bandwidth and delay guarantee, we have a radio with a fixed channel for layer-3 data reception at each node, used to estimate the available bandwidth and expected delay of a wireless link. Based on the estimate of available bandwidth and delay, we apply the call admission control to a new call requiring bandwidth and delay guarantee. New calls with traffic that will overflow link or network capacity are rejected so the accepted calls can use the required bandwidth and delay. Finally, we propose a routing metric, MCCR, which considers the channel contentions and collisions of a wireless link operating in CSMA/CA. MCCR is useful for finding a route with less traffic and distributing traffic over the network to prevent network congestion as much as possible. The simulation of the MCQosR protocol and the MCCR metric shows traffic is distributed and guaranteed service is provided for accepted calls.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.396-404
• /
• 2007

In this paper, an Ad-hoc Routing Protocol which works in wireless Ad-hoc communication networks with multiple radios and multiple channels, and controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which makes full duplex transmission between wireless Ad-hoc nodes, and reduces the intra interference on a route. Also, a fixed channel only for reception at each node enables the measurement of the available bandwidth, which is used to control the call admission for QoS provision. The performance of MCQosR is verified by simulation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.184-193
• /
• 1998

In this paper, a real-time acoustic echo canceller is implemented using only PC's CPU without extra help from a DSP chip. The adaptive digital filter is designed efficiently so that it can be implemented in real-time and has a proper cancellation performance. It is proposed that a new double talk detector consumes a small computational complexity and guarantees the fast detection and robust operation. The real-time acoustic echo canceller consists of the full-duplex sound card and 166 MHz Pentium PC, and requires less than 10% CPU time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3756-3760
• /
• 2010

In this paper we propose network design for power line communication of electric railway using messenger wire. we carried out feasibility study on the power line communication(PLC) using Contact wire and messenger wire which are required at electric railway. First of all, full-duplex data communication was implemented using coupler which is suspended on messenger wire at non-voltage state. We verified data transfer rate was found to be good, and then proposed a design example of PLC network as the main components for PLC. we will study continuously make an effort to verify on the network design of PLC for further study.

• BMB Reports
• /
• v.30 no.6
• /
• pp.426-430
• /
• 1997

The helical periodicity of the triple-stranded $(dT)_n{\cdot}(dA)_n{\cdot}(dT)_n$ sequence was determined by measuring gel-mobilities of bent DNA fragments containing the sequence. In the bent DNA fragments, a $GA_{22}G$ $CT_{22}C$ sequence was located between two bent DNA loci composed of six $A_{6}{\cdot}T_{6}$ repeats. and the DNA length between the bent DNA loci was varied by 1 base pair over a full helical turn. The gel mobility of each bent DNA fragment reflected the overall extent of DNA bending and varied with the DNA length between the two bent loci. Mobilities of the bent DNA fragments in 5% polyacrylamide gel were measured after preincubating the DNA fragments both in the presence and absence of $CT_{22}C$ oligonucleotide. By comparing the bent DNA fragments containing an intermolecular triplex structure with those of a genuine duplex structure in the gel mobilities, the helical periodicity of the $T_n{\cdot}A_n{\cdot}T_n$ triplex DNA was determined to be $11.5({\pm}0.3)bp/turn$.