• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.919-929
• /
• 2014

In recent, the requirements for the safety to the effects of high power electromagnetic wave have been increased along with the development of electricity and electronic equipments. The small sized electronic devices and the various components have been analyzed by using the full-EM simulation and solving a complete set of Maxwell equation. However, the deterministic approach has a drawback and much limitation in the electromagnetic analysis of an electrically large cavity with a high complexity of the structure. In this paper, statistical theory and topological modeling method are combined to analyze the large cavity with a complex structure. In particular, the PWB(Power Balance) method and BLT(Baum-Liu-Tesche) equation are combined and employed to solve the frequency response to the large-scaled cavity with remarkably reduced time-consumption. For instance, a PCB substrate inside box of box are considered as a large structure with a complexity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.189-197
• /
• 2013

With the trend of technological advances in electronic communications and the advent of ubiquitous environments, the density of existing electronic equipment in the surroundings is increasing significantly. It is hence great importance to study the numerically efficient and fast algorithm for complex and large environments to identify their electromagnetic compatibility and interference characteristics of equipments installed in those structure. This paper introduces a statistical-based power balance method(PWB) for the analysis of these problems and considers its practical utility. The 2-dimensional lossy rectangular cavity was numerically revisited to clarify its relationship with the classical deterministic analysis solutions based on the Maxwell's equation. It can be shown that the statistical assumptions and analysis results from the power balance method correspond to the volume average over the realistic deterministic domain. This statistical power balance approach should be a sufficiently practical alternative to the electromagnetic problem of complex and large environment since it is apparent that the full-wave analysis methods have some severe limits of its computational burdens under the situation of complex and large environment.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.39-46
• /
• 2019

The competition for standardization in the enterprise environment starts with the data tier of the back-end and the standard enterprise middle tier is being stabilized by standardization as it is accepted as the Spring Framework. In addition, with the advent of new devices in an increasingly rapid cycle, securing compatibility with web and mobile services has become an important competitive advantage for web service companies. However, companies are unable to secure competent technical personnel appropriate for the rapidly changing environment of the information generation, and the curriculum of educational universities does not reflect the demand of new competency-oriented curriculum. Therefore, in this study, in order to acquire competency-oriented skills required for such an enterprise system platform environment and to develop a curriculum, the system using Spring Data JPA in the Spring Framework environment was implemented through documenting for each analysis and design step. It aims to provide a reference model for the full stack competency-based curriculum and capstone design curriculum that can be applied immediately in the enterprise environment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.198-203
• /
• 2012

Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.264-270
• /
• 2014

This paper introduces a novel repetitive delivery scheme for the left and right views in service-compatible (SC) 3D video that provides full backward compatibility to a legacy DTV system while retaining HD 3D visual quality without additional bandwidth or a codec over the legacy broadcasting channel. The proposed SC delivery scheme transmits individual view sequences of a 3D video in interlaced form, that is, a left-view sequence of a 3DTV program to be used repeatedly is transmitted first and stored locally, and the right-view sequence of the 3D program is then transmitted. This paper specifically describes the signaling, synchronization, and storage format methods used to validate the proposed SC delivery scheme. The experiment results show that the proposed SC delivery scheme can be effectively applied for an SC 3DTV service without degrading the DTV quality using only legacy DTV platforms.

• Journal of Intelligence and Information Systems
• /
• v.6 no.2
• /
• pp.29-40
• /
• 2000

Process planning (selection and ordering of processes) and material selection for product manufacturing are two key things determined before taking full-scale manufacturing. Knowledge on product design. material characteristics, processes, time and cost all-together are mutually related and should be considered concurrently. Due to the complexity of problem, human experts have got only one of the feasilbe solutions with their field knowledge and experiences. We propose a hierarchical expert system framework of knowledge representation and reasoning in order to overcome the complexity. Manufacturing processes have inherently hierarchical relationships, from top level processes to bottom level operation processes. Process plan of one level is posted in process blackboard and used for lower level process planning. Process information on blackboard is also used to adjust the process plan in order to resolve the dead-end or inconsistency situation during reasoning. Decision variables for process, material, tool, time and cost are represented as object frames, and their relationships are represented as constraints and rules. Constraints are for relationship among variables such as compatibility, numerical inequality etc. Rules are for causal relationships among variables to reflect human expert\`s knowledge such as process precedence. CRSP(Constraint and Rule Satisfaction Problem) approach is adopted in order to obtain solution to satisfy both constraints and rules. The trade-off procedure gives user chances to see the impact of change of important variables such as material, cost, time and helps to determine the preferred solution. We developed the prototype system using visual C++ MFC, UNIK, and UNlK-CRSP on PC.

• Earthquakes and Structures
• /
• v.15 no.5
• /
• pp.473-485
• /
• 2018

The buildings of architectural and cultural heritage are mostly built with stone or brick wall elements, which are connected using limestone or limestone cement mortar, without a full knowledge of the mechanical properties of masonry structures. The compatibility of heritage masonry buildings with valid technical specifications and the rules for earthquake resistance implies the need for construction work such as repairs, strengthening or reconstruction. By strengthening the masonry buildings, ductility and bearing capacity are increased to a level, which, in the case of the earthquake design, allows for some damage to happen, however the structure retains sufficient usability and bearing capacity without the possibility of collapse. Comparison between traditional and modern techniques for seismic strengthening of masonry buildings is given according to their effects, benefits and disadvantages. Recent Croatian provisions provided for heritage buildings enabling deviation of technical specifications are discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.31-37
• /
• 2010

In proportion to increasing interest in vehicle safety, many country have regulated vehicle safety and performed NCAP(New Car Assessment Program). However vehicles which had good results in these compliance and NCAP frontal crash test have caused problems such as the fork effect and over-riding in real car-to-car accidents. To complement these issues, new frontal crash test modes using new barrier like FWDB and PDB have been developed by EEVC WG15. In this paper, FWDB frontal crash test was performed and the result was compared with the full frontal crash test using the rigid wall in order to comprehend the characteristic of FWDB. The results of FWDB test were compared with one of USNCAP and KNCAP. Using USNCAP data, vehicle performance like deformation and wall force were studied. A comparative study of dummy injuries was made by using KNCAP result. The results showed that vehicle performance of FWDB test like displacement and effective acceleration was similar in spite of absorbing energy of FWDB due to the greater vehicle deformation of rigid wall test. In FWDB test, driver dummy head bottomed out but most of injuries were superior to the injury of rigid wall test.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.28.2-28.2
• /
• 2011

Resistance random access memory (ReRAM) is a promising candidate for next-generation nonvolatile memory because of its advantageous qualities such as simple structure, superior scalability, fast switching speed, low-power operation, and nondestructive readout. We investigated the resistive switching behavior of tantalum oxide that has been widely used in dynamic random access memories (DRAM) in the present semiconductor industry. As a result, it possesses full compatibility with the entrenched complementary metal-oxide-semiconductor processes. According to previous studies, TiN is a good oxygen reservoir. The TiN top electrode possesses the specific properties to control and modulate oxygen ion reproductively, which results in excellent resistive switching characteristics. This study presents fully room temperature fabricated the TiN/$TaO_x$/Pt devices and their electrical properties for nonvolatile memory application. In addition, we investigated the TiN electrode dependence of the electrical properties in $TaO_x$ memory devices. The devices exhibited a low operation voltage of 0.6 V as well as good endurance up to $10^5$ cycles. Moreover, the benefits of high devise yield multilevel storage possibility make them promising in the next generation nonvolatile memory applications.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.17-23
• /
• 2012

This paper analyzes the feasibility of a new 3DTV broadcasting service scenario via Advanced Television Systems Committee Mobile/Handheld (ATSC-M/H). We suggest a dual-channel system in which a left-view image is encoded by MPEG-2 with HD quality and a small-sized right-view image is encoded by AVC. Also, the left view is transmitted through ATSC main channel and the right view is transmitted through ATSC-M/H channel. Although the transport stream formats of two channels are different from each other, we demonstrate that it is possible for the ATSC 2.0 decoder to synchronize the display of the left and right views when both encoders use a common wall clock and time stamp. We also propose a program specific information descriptor which guarantees full compatibility with the conventional 2D HDTV and emerging mobile TV services. Finally, we provide the results of subjective visual quality assessment of the proposed system in support of its 3DTV service quality.