• Journal of Magnetics
• /
• 제18권2호
• /
• pp.168-172
• /
• 2013

We have developed a high-field and high-frequency ESR system using a commercially available magnetometer equipped with the superconducting quantum interference device (SQUID). This is magnetization detection type ESR and ESR is observed as a change of the magnetization at the resonance condition under irradiation of the electromagnetic wave. The frequency range is from 70 to 315 GHz and the maximum magnetic field is 5 T. The sensitivity is estimated to be $10^{13}$ spins/G. The advantage of this system is that the high-field ESR measurements can be made very easily and quantitatively. Moreover, this high-field ESR can be applied to the measurements under pressure by using a widely used piston-cylinder pressure cell.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1630-1633
• /
• 2002

In this paper, we proposed a new control system of the dividing ratio changeable type ADPLL (DCPLL). The DCPLL has been designed by us. However, in the DCPLL, there are some problems such as this curcuit is increased the output jitter on multiple frequency, and the output jitter is large on steady state. Then, the output jitter characteristic on multiple frequency is improved by using “rest-control” system. Also, output jitter decreases by using “W-edge (positive edge h negative edge)” system. We confirmed some characteristics of the DCPLL with the circuit simulator, PSpice.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.485-490
• /
• 2004

Sawtooth mixing device used in a non-premixed burner is evaluated for flame stabilization and NO$_{x}$ reduction. Three mixers with different blade angles are tested. Methane is delivered through the fuel jet and air passes through the co-flow annulus. The flame mode changes (attached flame, lifted flame and extinction) against the fuel flow speed are measured, and the stability diagram is drawn. Moreover, by traversing thermocouple and sampling probe in the flame, the distribution of temperature and NO$_{x}$ mole fraction are measured. With the change in blade angle, flame shape, flame stabilization, the distribution of temperature and NO$_{x}$ mole fraction are changed considerably.rably.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.254-255
• /
• 2006

Powder library of pseudo four components Li-Ni-Co-Ti compounds were prepared for exploring the composition region with the single phase of the layer-type structure by using combinatorial high-throuput preparation system "M-ist Combi" based on electrostatic spray deposition method. The new layer-type compounds were found wider composition region than the previous report. This process is promising way to find multi component functional materials.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제2호
• /
• pp.206-209
• /
• 2004

A requirement of park management is to transfer the focus from emphasizing the management of public materials to providing services to visitors. Therefore, it has become indispensable to create a scheme in which residents can take management initiative. At this time, we look at Hyogo Prefectural Arimafuji Park, which encourages citizen management participation, and try to understand their system and project contents. For an initial scheme, we identify 4 elements that promoted subjective participation in a council style scheme; 1. to begin activities at the earliest possible time before opening the park, 2. to coordinate with expert(s) who take a neutral position, 3. to have places available where participants can debate on an equal footing, and 4. to plan the project while feeding back actual results.

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 2002년도 Join Meetings of Korean Society of Sericultural Science and Japanse Society of Sericultural Science
• /
• pp.146-146
• /
• 2002

No Abstract, See Full Text

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 2002년도 Join Meetings of Korean Society of Sericultural Science and Japanse Society of Sericultural Science
• /
• pp.42-42
• /
• 2002

No Abstract, See Full Text

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.60-66
• /
• 2005

In this paper, we propose the basic measurement method of a 3D digitizer using a CCD camera in detail. In the localization measurement with a CCD camera, the effect of the background light and the sensitivity consideration are always problems in realizing a high precision. In this research, a new measurement principle is proposed in which the pulse compression technique known in radar is used to eliminate the effect of background light even under a low intensity light source, and the coordinate values on the CCD camera image plane are determined accurately. From the quantitative evaluation of the S/N ratio improvement and the fundamental experiment, it is verified that a substantial improvement in the S/N ratio is realized for both the background noise and the pixel noise and that a resolution of less than the pixel is sufficiently possible.

• Natural Product Sciences
• /
• 제4권4호
• /
• pp.268-273
• /
• 1998

Two new triterpenoid saponins, named segetoside D and E, have been isolated from the seeds of Vaccaria segetalis. On the basis of chemical reactions and spectral data, structures of segetoside D and E have been established as: $28-O-[{\beta}-D-xylopyranosyl-(1{\rightarrow}4)-{\alpha}-L-rhamnopyranosyl-(1{\rightarrow}2)]-[5-O-acetyl-{\alpha}-arabinofuranosyl(1{\rightarrow}3)]-[4-O-acetyl-{\beta}-D-fucopyranosyl]-quillaic\;acid-3-O-[{\beta}-D-galactopyranosyl(1{\rightarrow}2)]6-O-methyl\;ester-{\beta}-D-glucuronopyranoside$ and $28-O-[{\beta}-D-xylopyranosyl-(1{\rightarrow}4)-{\alpha}-L-rhamnopyranosyl-(1{\rightarrow}2)]-[5-O-acetyl-{\alpha}-arabinofuranosyl(1{\rightarrow}3)]-[4-O-acetyl-{\beta}-D-fucopyranosyl]-quillaic\;acid\;-3-O-[{\beta}-D-galactopyranosyl(1{\rightarrow}2)]-6-O-n-butyl\;ester-{\beta}-D-glucuronopyranoside$, respectively.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.45-57
• /
• 2002

In this paper, the results gained by applying many impingement models to the cylinder and flat plate were analyzed in comparison with the experimental data to study a spray/wall interaction phenomena. To begin with, the behavior of spray injected normal to the wall was analysed using three different impingement models ; Naber and Reitz model(NR model), Watkins and Wang model(WW model) and Park and Watkins model(PW model) in the present calculation. The results obtained from these models were compared with experimental data of Katsura et. al. The results indicated that PW model was in better agreement with experimental data than the NR and WW model. Also f3r spray injected at 30DEG , the result of three models were compared with experimental data of Fujimoto et. al. The results showed that m model overpredicted the penetration in the radial direction because this model was based on the inviscid jet analogy. WW model did not predicted the radius and height of the wall spray effectively. It might be thought that this discrepancy was due to the lack of consideration of spray film velocity occurred at impingement site. The result of PW model agrees with the experimental data as time goes on. In particular, a height of the spray droplets was predicted more closely to the experimental data than the other two models. The results of PW model in which the spray droplets were distributed densely around the edge of droplet distribution shaped in a circle had an agreement with the experimental data of Fujimoto et. al. Therefore, it was concluded that PW model performed better than M and WW model for prediction of spray behavior. The numerical calculation using PW model performed to the cylinder similar to the real shape of DI engine. The results showed that vortex strength near the wall in the cylinder was stronger than that in the case of flat plate. Contrary to the flat plat, an existence of the side wall in the cylinder caused the tangential velocity component to be reduced and the normal velocity component to be increased. The flow tends to rotate to the inside of cylinder going upward to the right side wall of cylinder gradually as time passes. Also, the results showed that as the spray angle increases, the gas velocity distribution and the tumble flow seemed to be formed widely.