• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.512-518
• /
• 1994

An experimental study is made on turbulent diffusion flames stabilized by a circular cylinder in a divergence flow. In this paper, stabilization characteristics and flame structure are examined by varying the divergence angle of duct and position of a circular cylinder. The fuel used is a commercial grade gaseous propane injected by two slit of rod. It is found that the positive pressure gradient greatly influences the eddy structure behind the rod. and that two different kinds of combustion patterns exist at the blowoff limit depending on the divergent angle of duct. They are distinguished by their wake structures: one associated with Karman vortex shedding, the other without it. Also, the blowoff velocity in the former is found to be higher than in the later.

• 전기의세계
• /
• 제15권5호
• /
• pp.1-5
• /
• 1966

The stability and safety of operation of a reactor is determined mainly by the sign and magnitude of its reactivity responses to temperature changes. Reactors are subject to temperature fluctuations due to the changes in reactor power and ambient temperature. These temperature fluctuations cause reactivity disturbances through changes in the nuclear and physical properties of the core. Because of these important phenomena by the temperature effects, a large portion of study and testing on a reactor design has been conducted. In this experiment the overall temperature coefficient of the TRIGA MARK-II reactor is measured. The basic procedure is to change the tgemperature of the water moderator, and from the movements of a newly recalibrated control rod(this is necessary due to the effects of fuel burn-up and control rod depression) required to mintain criticality, the reactivity worth of the temperature change is determined. From this measurement, the overall temperature coefficient seems to be smoothly varying, almost a linear function of temperature, and a value of approximately -0.267${\c}$/$^{\circ}C$ can be obtained for an average temperature range from $17.6^{\circ}C$ to $32.5^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3106-3116
• /
• 2022

The present work presents analysis results of the core design optimizations for an annular, prismatic High Temperature Gas-cooled Reactor (HTGR) with passive decay-heat removal features. Its thermal power is 100 MW_t and the operating temperature is 850 ℃ (1123 K). The neutronic calculations are done for the core with heterogeneous distribution of fuel and burnable poison particles (BPPs) to flatten the reactivity swing and power peaking factor (PPF) during the reactor operation as well as for control rod (CR) insertion into the core to restrain a small excess reactivity less than 1$. The next step of the study is done for evaluation of core reactivity coefficient of temperature.

• 비파괴검사학회지
• /
• 제22권1호
• /
• pp.9-13
• /
• 2002

수중에서 사용후 핵연료 제원측정 시험의 효율성을 높이고 측정오차를 줄이기 위하여 수중 영상측정방법을 개발하였다. 이 시스템의 모의 핵연료봉 직경 및 길이 측정치는 실제값 기준으로 할 때, 각각 $-0.24{\pm}0.03mm,\;0.34{\pm}0.06mm$이고 측정 최대오차는 각각 -0.3mm 및 0.4mm이내였다. 실제 사용후핵연료에 대한 수중 제원측정결과 고리원자력 2호기에서 2주기 동안 연소한 핵연료 집합체 J44의 핵연료봉 직경은 설계치 기준으로 할 때 핵연료봉 상 하단부 직경은 2.0%, 중앙부의 직경은 3.0% 정도 감소하였으나 핵연료봉의 길이는 0.4% 정도 신장하였다. 고리원자력 1호기에서 3주기 동안 연소한 핵연료 집합체 F02의 핵연료봉의 직경 및 길이는 핵연료 집합체 J44의 결과와 비슷한 경향을 나타내었다.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.375-380
• /
• 2017

본 논문은 한국원자력연구원에서 개발 중인 소듐냉각 고속로 핵연료의 연료봉 하단 마개에 있는 관통구멍과 마운팅 레일의 원기둥 형상과의 접촉부에 발생하는 접촉 손상을 예측하기 위한 가속시험 방법을 연구한 것이다. 가속시험 조건으로서 연료봉의 유체유발진동수 및 진폭을 유한요소 해석을 통하여 구하였다. 약 35000 시간의 연료봉 수명기간을 고려한 가속시험 시간을 결정하기 위해 일반 기계부품류의 신뢰성 평가 방법을 적용하였으며, 이때 가장 보수적인 형상 모수와 원자로 내에서의 연료봉 파손허용 개수 기준 및 연료봉 피복관 재료인 HT-9강의 피로수명 데이터를 이용하였다. 시편의 개수를 5개로 하였을 때, 최종적으로 계산된 가속 시험시간은 각 시편 당 16.5시간이었다. 가속시험 후 전체 시편에 어떠한 접촉손상도 관찰되지 않을 때 연료봉의 수명기간 중 $B_{0.004}$ 수명이 신뢰수준 99%로 보장되는 것으로 평가하였다.

• Tribology and Lubricants
• /
• 제23권3호
• /
• pp.130-133
• /
• 2007

Fuel cladding tubes in nuclear fuel assembly are held up by supporting grids because the tubes are long and slender. Fluid flows of high-pressure and high-temperature in the tubes cause oscillating motions between tubes and supports. This is called as FIV (flow induced vibration), which causes fretting wear in contact parts of tube and support. The fretting wear of tube and support can threaten the safety of nuclear power plant. Therefore, a research about the fretting wear characteristics of tube-support is required. The fretting wear tests were performed with supporting grids and cladding tubes, especially after corrosion treatment on tubes, in water. The tests were done using various applied loads with fixed amplitude. From the results of fretting tests, the wear amounts of tube materials can be predictable by obtaining the wear coefficient using the work rate model. Due to stick phenomena the wear depth was changed as increasing load and temperature. The maximum wear depth was decreased as increasing the water temperatures. At high temperatures there are the regions of some severe adhesion due to stick phenomena.

• Tribology and Lubricants
• /
• 제24권3호
• /
• pp.129-132
• /
• 2008

Fuel cladding tubes in nuclear fuel assembly are held up by supporting grids because the tubes are long and slender. Fluid flows of high-pressure and high-temperature in the tubes cause oscillating motions between tubes and supports. This is called as FIV (flow induced vibration), which causes fretting wear in contact parts of tube and support. The fretting wear of tube and support can threaten the safety of nuclear power plant. Therefore, a research about the fretting wear characteristics of tube-support is required. The fretting wear tests were performed with supporting grids and cladding tubes, especially after corrosion treatment on tubes, in water. The tests were done using various applied loads with fixed amplitude. From the results of fretting tests, the wear amounts of tube materials can be predictable by obtaining the wear coefficient using the work rate model. Due to stick phenomena the wear depth was changed as increasing load and temperature. The maximum wear depth was decreased as increasing the water temperatures. At high temperatures there are the regions of some severe adhesion due to stick phenomena.

• 대한기계학회논문집A
• /
• 제38권2호
• /
• pp.157-166
• /
• 2014

경수로 핵연료가 원자로내에서 연소되는 동안 핵연료 펠릿에서부터 피복관까지 온도해석은 핵연료 안전 해석에 있어 중요한 요소이며, 경수로 핵연료 온도 해석을 하기 위해서는 간극 모델 개발이 필수적이다. 간극 열전도도는 특성상 간극 두께값에 의존적이게 되며 이러한 특성으로 인해 다차원 간극 열전도도 모델이 비선형적 거동을 보인다. 본 연구에서는 선형화된 다차원 간극 열전도도 모델 개발을 위해 가상 연결 간극 요소를 제안하였다. 제안된 간극 연결 요소에 간극 열전도도를 적용하기 위해 등가 열전달 계수를 정의하였다. 제안된 모듈을 평가하기 위해 상용코드 ANSYS APDL 을 이용하여 열-구조 연계 해석 모듈을 구현하였으며, 다양한 예제를 통해 정확성과 수렴성을 평가하였다.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.313-317
• /
• 2018

Licenses for the storage of spent nuclear fuel (SNF) and vitrified highly active waste in casks under dry conditions are limited to 40 years and have to be renewed for prolonged storage periods. If such a license renewal has to be expected since as in accordance with the new site selection procedure a final repository for spent fuel in Germany will not be available before the year 2050. For transport and possible unloading and loading in new casks for final storage, the integrity and the maintenance of the geometry of the cask's inventory is essential because the SNF rod cladding and the cladding of the vitrified highly active waste are stipulated as a barrier in the storage concept. For SNF, the cladding integrity is ensured currently by limiting the hoop stress and hoop strain as well as the maximum temperature to certain values for a 40-year storage period. For a prolonged storage period, other cladding degradation mechanisms such as inner and outer oxide layer formation, hydrogen pick up, irradiation damages in cladding material crystal structure, helium production from alpha decay, and long-term fission gas release may become leading effects driving degradation mechanisms that have to be discussed.

• Nuclear Engineering and Technology
• /
• 제37권1호
• /
• pp.79-90
• /
• 2005

In this paper are reviewed the current status of nuclear fuel management and reactor operational aid tools. In addition, we indicate deficiencies in current capabilities and what future research is judged warranted. For the nuclear fuel management review the focus is on light water reactors and the utilization of stochastic optimization methods applied to the lattice, fuel bundle, core loading pattern, and for BWRs the control rod pattern/core flow design decision making problems. Significant progress in addressing separately each of these design problems on a single cycle basis is noted; however, the outstanding challenge of addressing the integrated design problem over multiple cycles under conditions of uncertainty remains to be addressed. For the reactor operational aid tools review the focus is on core simulators, used to both process core instrumentation signals and as an operator aid to predict future core behaviors under various operational strategies. After briefly reviewing the current status of capabilities, a more in depth review of adaptive core simulation capabilities, where core simulator input data are adjusted within their known uncertainties to improved agreement between prediction and measurement, is presented. This is done in support of the belief that further development of adaptive core simulation capabilities is required to further significantly advance the utility of core simulators in support of reactor operational aid tools.