• 제목/요약/키워드: Fuel marker

검색결과 11건 처리시간 0.027초

HPLC를 이용한 석유제품 내의 가시적 식별제 분석 (Determination of Visible Marker in Petroleum Using HPLC)

  • 임영관;김동길;임의순;신성철
    • 공업화학
    • /
    • 제21권3호
    • /
    • pp.306-310
    • /
    • 2010
  • 석유제품의 분별 및 유종의 불법혼입방지를 위해 현재 석유제품 내에 일정한 색을 띄는 가시적 식별제(착색제)를 혼입, 유통시키고 있다. 하지만 타유종이 미량 혼입되었을 경우, 육안으로 이를 판별하기 힘들다. 본 연구는 국내에서 사용되고 있는 가시적 식별제를 UV/Vis spectrophotometer를 이용하여, 이들을 분석할 수 있는 두 파장(370 nm, 645 nm)을 찾아내었다. 이렇게 분석된 파장에서 HPLC를 이용해 국내 석유제품 내의 가시적 식별제를 분리, 분석하였다. 또한 정상 석유제품에 타유종을 혼합한 뒤, 가시적 식별제를 분석함으로 석유제품의 불법 혼합판별을 할 수 있는 분석방법을 찾아내었다.

석유제품의 식별제(Unimark 1494DB) 분석을 위한 HPLC 적용가능성 분석 연구 (Study on the Applicability Analysis of HPLC for Fuel Marker (Unimark 1494DB) in Petroleum Products)

  • 황인하;연주민;도진우;박태성;강형규;하종한;나병기
    • 한국응용과학기술학회지
    • /
    • 제34권4호
    • /
    • pp.1076-1084
    • /
    • 2017
  • 석유제품 내의 식별제를 정성 정량분석하기 위해 HPLC의 적용가능성을 연구하였다. 등유와 자동차용 경유에 함유된 식별제의 정성분석을 위해 HPLC에서 최적의 분석조건(이동상 용매의 비율, 유속 등)을 선정하고, 이를 바탕으로 식별제의 정량분석을 위한 검량곡선을 작성하였다. 특히, 일정 농도 범위에서의 등유는 4.75분에서, 그리고 자동차용 경유는 4.17분의 머무름시간(retention time)을 나타내었고, 등유와 자동차용 경유의 검량곡선 상관계수($R^2$)가 0.999 이상을 나타내어 정량분석에 적용 가능할 것으로 나타났다. 현행 식별제의 분석방법인 UV/Vis 분광광도계를 이용한 분석결과와 비교분석을 실시하였고, 등유의경우 약 7 %의 낮은 편차를 보였으며, 자동차용 경유의 경우 약 20 %의 다소 큰 편차를 확인하였다.

GC-MS를 이용한 석유제품 중의 식별제 분석 (Determination of fuel marker in petroleum products using GC-MS)

  • 연주민;도진우;임의순;이정민
    • 한국응용과학기술학회지
    • /
    • 제35권4호
    • /
    • pp.1073-1080
    • /
    • 2018
  • 연료유로 사용되는 석유제품은 각각의 품질기준, 등급, 사용용도에 따라 여러 종류가 있다. 국가별로 유류에 세금을 부과하는 정도에 따라 동일한 석유제품이라 하더라도 가격차이가 발생한다. 가격이 저렴한 비과세의 석유제품을 상대적으로 고가인 수송용 연료에 불법적으로 혼합하는 행위로 인하여 탈세, 환경오염, 차량고장 등의 문제가 발생한다. 이러한 석유제품간 불법 혼합을 방지하기 위해 특정 석유제품에 미량의 식별제(Marker)를 법적으로 첨가하고 있다. 국내에서는 가정용 및 상업용 연료로 사용되는 등유를 자동차용 경유에 불법적으로 혼합하는 행위를 방지하기 위하여 식별제를 도입하여 사용하고 있으며, UV-Vis 분광광도계나 HPLC를 이용하여 식별제 함량을 정량적으로 분석하고 있다. 본 연구에서는 기존에 식별제 함량 분석을 위해 발색제를 첨가하거나 시료를 전처리하는 조작없이 GC-MS로 석유제품에 첨가된 식별제를 정성적 및 정량적으로 분석하는 방법을 개발하였다.

HPLC를 이용한 석유제품 중의 식별제 Unimark 1494DB 분석 (Determination of Unimark 1494DB in Petroleum using HPLC)

  • 임영관;김동길;임의순;신성철
    • Korean Chemical Engineering Research
    • /
    • 제47권5호
    • /
    • pp.593-598
    • /
    • 2009
  • 정상경유에 등유 및 부생연료유를 인위적으로 혼합한 후, SPE 전처리 과정과 HPLC 분석을 통해 석유제품 내에 함유되어 있는 식별제의 정성 정량분석방법에 관해 연구하였다. SPE 전처리 과정에서 시료주입 후 15분에 분취된 시료에서 가장 높은 농도의 식별제가 분석되었다. 경유제품에 1 mg/L의 식별제를 혼입시킨 후, 전처리를 거쳐 HPLC로 분석한 결과 9.8분의 머무름시간에서 $1626.92mV{\cdot}sec$ 의 감도로 식별제가 분석되었으며, 또한 기존의 UV-Spectroscopy법으로 분석이 힘들었던 산성조건의 석유제품에서 식별제 분석이 가능하였다.

MEASUREMENT OF NUCLEAR FUEL ROD DEFORMATION USING AN IMAGE PROCESSING TECHNIQUE

  • Cho, Jai-Wan;Choi, Young-Soo;Jeong, Kyung-Min;Shin, Jung-Cheol
    • Nuclear Engineering and Technology
    • /
    • 제43권2호
    • /
    • pp.133-140
    • /
    • 2011
  • In this paper, a deformation measurement technology for nuclear fuel rods is proposed. The deformation measurement system includes a high-definition CMOS image sensor, a lens, a semiconductor laser line beam marker, and optical and mechanical accessories. The basic idea of the proposed deformation measurement system is to illuminate the outer surface of a fuel rod with a collimated laser line beam at an angle of 45 degrees or higher. For this method, it is assumed that a nuclear fuel rod and the optical axis of the image sensor for observing the rod are vertically composed. The relative motion of the fuel rod in the horizontal direction causes the illuminated laser line beam to move vertically along the surface of the fuel rod. The resulting change of the laser line beam position on the surface of the fuel rod is imaged as a parabolic beam in the high-definition CMOS image sensor. An ellipse model is then extracted from the parabolic beam pattern. The center coordinates of the ellipse model are taken as the feature of the deformed fuel rod. The vertical offset of the feature point of the nuclear fuel rod is derived based on the displacement of the offset in the horizontal direction. Based on the experimental results for a nuclear fuel rod sample with a formation of surface crud, an inspection resolution of 50 ${\mu}m$ is achieved using the proposed method. In terms of the degree of precision, this inspection resolution is an improvement of more than 300% from a 150 ${\mu}m$ resolution, which is the conventional measurement criteria required for the deformation of neutron irradiated fuel rods.

토양오염 원인자 판단을 위한 항공유 분석 (Analysis of Jet Fuel for the Judgment of Soil Polluter)

  • 임영관;정충섭;한관욱;장영주
    • 공업화학
    • /
    • 제25권1호
    • /
    • pp.27-33
    • /
    • 2014
  • 석유누출 사고로 인해 토양과 지하수 오염이 점차 증가되면서, 토양환경에 대한 중요성이 늘고 있다. 토양오염은 다른 환경오염에 비해 많은 정화비용과 긴 정화기간이 요구된다. 이런 이유로 토양오염이 발생되면, 어떤 오염물질에 의해 토양이 오염되었으며, 토양정화의 책임이 있는 오염자가 누구인지 법적 분쟁이 많이 발생되고 있다. 본 연구에서는 토양오염을 발생시킬 수 있는 항공유에 대한 물성 분석과 함께 항공유 내의 특정 첨가제를 분석함으로써 등유와 항공유의 구분법을 찾아내었다. 특히 발색제에 의해 등유 내 화학적 식별제만 발색되었으며, GC-MS 분석결과 항공유에서만 산화방지제와 금속불활성제가 분석되었다. 이는 추후 항공유에 의한 토양오염 야기 시, 어떤 석유제품에 의한 오염인지 쉽게 판단이 가능할 것이다.

식별제(Unimark 1494DB) 정량시험에서 파란색 색소(Orimax Blue 2N, Orimax Green 151), Quinizarin, 토파졸(P-250) 및 윤활유 원료(P-8)의 흡광도상승 효과 (Absorbance Elevation of Orimax Blue 2N, Orimax Green 151, Quinizarin, Topasol (P-250) and Lubricant (P-8) on the Spectrophotometric Analysis of Unimark 1494 DB)

  • 이지윤;김창종
    • 약학회지
    • /
    • 제50권5호
    • /
    • pp.313-321
    • /
    • 2006
  • There are three kinds of liquid petroleum marker which is extracted by the basic or acidic, and both developer. Korean marker, Unimark 1494 DB (marker) have been spectrophotometrically analysed by the determination of absorbance at 582 nm after base extraction by Unimark 1494 DB Developer C-5 (developer). Some blue dyes which have same reactive radical of marker and can be changed deep blue color in base developer extraction (BDE), may be increased absorbance at 582 nm, but dyes or markers which can be increased the absorbance, were not unclear. In this experiment, effects of three dyes or marker such as Orimax Green 151 (the mixture of CI Solvent Yellow 16 and CI Solvent Blue 70), quinizarin and Orimax Blue 2N (CI Solvent Blue 35), and two solvent such as topasol (P-250) and lubricant (P-8) on the absorbance were studied by HITACHI Recording Spectrophotometer U-3300. It shows that all of them increased absorbance at 582 nm after BDE. Absorbance at 582 nm can be showed 0.0544 by Orimax Green 151 at the concentration of 3.96 mg/l, quinizarin at the concentration of 1.38 mg/l, and Orimax Blue 2N at the concentration of 2.73 mg/l in the artificial petroleum (normal diesel oil: topasol: lubricant=2 : 4: 4), respectively. Absorbance, 0.0544 indicates that concentration of marker is 1.64 mg/l in the reference curves, respectively. And also these results can be showed that the artificial petroleum have about 10% cheep fuel such as kerosene which have marker (16.0 mg/l). Absorbance of P-250 was 0.01361-0.22842 depending upon the purchasing date, and that of P-8 was 0.05644. pH of developer was 14.83, and so this result indicates that Unimark 1494 DB is a base extractable petroleum marker, phenylazophenol (US Patent No. 5,252,106). In the BDE, the slight color of Orimax Blue 2N, Orimax Green 151 and quinizarin in artificial petroleum changed to deep bright blue color, respectively. These result indicate that the absorbance at 582 nm by BDE may be increased not only by azo, diazo, amine and ketone (anthraquinone, coumarin) dyes or markers, but also the contaminants of P-250 and P-8 which have same as reactive radical of dyes or markers.

영상처리를 이용한 핵연료봉의 변형 검사 (Inspection of the Nuclear Fuel Rod Deformation using an Image Processing)

  • 조재완;최영수
    • 대한전자공학회논문지SP
    • /
    • 제47권1호
    • /
    • pp.91-96
    • /
    • 2010
  • 본 논문에서는 핵연료봉의 변형에 대한 고정도 검사방법을 제안한다. 핵 연료봉과 이를 관측하는 영상 센서의 광축을 수직으로 구성한다. 영상 센서의 광축을 기준으로 45도 또는 그보다 높은 각도로 레이저 라인빔을 연료봉 표면에 조사하면 연료봉의 수평 방향 변위가 영상 센서에서는 수직 방향 변위로 관측된다. 핵 연료봉 표면에 일정 각도로 입사된 레이저 라인빔이 영상 센서면에서는 일정 두께를 갖는 포물선 형태로 관측되게 된다. 센서 화면에 나타나는 일정 두께의 포물선을 영상처리하여 타원으로 모델링하고 타원의 장축과 단축의 기울기를 구한다. 포물선의 변곡점과 모델링한 타원의 장축과 단축이 교차하는 지점을 특징점으로 추출한다. 이와 같은 영상처리 알고리즘을 이용하여 핵 연료봉의 수평방향 변위에 따른 특징점 좌표의 수직방향 편차를 계산한다. 크러드가 형성된 핵연료봉 시편에 대해 고해상도 영상센서를 사용하여 실험한 결과 중성자 조사후 핵연료봉의 변형 검사기준인 $150{\mu}m$ 보다 3배 이상 개선된 $50{\mu}m$ 이하의 검사 정밀도를 달성하였다.

Characterization of Particulate Emissions from Biodiesel using High Resolution Time of Flight Aerosol Mass Spectrometer

  • Choi, Yongjoo;Choi, Jinsoo;Park, Taehyun;Kang, Seokwon;Lee, Taehyoung
    • Asian Journal of Atmospheric Environment
    • /
    • 제9권1호
    • /
    • pp.78-85
    • /
    • 2015
  • In the past several decades, biofuels have emerged as candidates to help mitigate the issues of global warming, fossil fuel depletion and, in some cases, atmospheric pollution. To date, the only biofuels that have achieved any significant penetration in the global transportation sector are ethanol and biodiesel. The global consumption of biodiesel was rapidly increased from 2005. The goal of this study was to examine the chemical composition on particulate pollutant emissions from a diesel engine operating on several different biodiesels. Tests were performed on non-road diesel engine. Experiments were performed on 5 different fuel blends at 2 different engine loading conditions (50% and 75%). 5 different fuel blends were ultra-low sulfur diesel (ULSD, 100%), soy biodiesel (Blend 20% and Blend 100%) and canola biodiesel (Blend 20% and Blend 100%). The chemical properties of particulate pollutants were characterized using an Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS). Organic matter and nitrate were generally the most abundant aerosol components and exhibited maximum concentration of $1207{\mu}g/m^3$ and $30{\mu}g/m^3$, respectively. On average, the oxidized fragment families ($C_xH_yO_1{^+}$, and $C_xH_yO_z{^+}$) account for ~13% of the three family sum, while ~87% comes from the $C_xH_y{^+}$ family. The two peaks of $C_2H_3O_2$ (m/z 59.01) and $C_3H_7O$ (m/z 59.04) located at approximately m/z 59 could be used to identify atmospheric particulate matter directly to biodiesel exhaust, as distinguished from that created by petroleum diesel in the AMS data.

일부 주부의 실내공기 중 PAHs 노출에 관한 연구 (An Assessment of Korean Housewives Exposed to Polycyclic Aromatic Hydrocabons(PAHs) in Indoor Air)

  • 이태형;김윤신;손부순
    • 한국환경과학회지
    • /
    • 제16권3호
    • /
    • pp.323-331
    • /
    • 2007
  • Polycyclic aromatic hydrocarbons (PAHs) are well known for strong carcinogen. However, the human exposure analysis of PAHs is quite difficult and unreliable because of hard for estimation of actual expose dose. Then urinary 1-hydroxypyrene (1-OHP) has been a biological marker of exposure to PAHs. The purpose of this study was to investigate total amount from exposure to PAHs soused by indoor occupational exposure, and residence at Seoul metropolitan area and Kyeonggi province in Korea. Thirty-five housewives were included in this study from April 2003 through February 2004. Dietary habit and general characteristics such as age, type of building, existence of passive smoking, period of residence, fuel type for heating and ventilation type were obtained by self administered questionnaire. Urine samples were collected at morning and freeze quickly. Urinary creatinine was measured for converting into 24 hr urine. Concentration of the indoor PAHs was examined by NIOSH method number 5506. Urinary 1-OHP and PAHs were analysed by HPLC. Correlation coefficient between urinary 1-OHP levels and pyrene concentration of indoor air was 0.66 and statistically significant(P<0.01). The difference of urinary 1-OHP level due to dietary habits were not significant. Urinary 1-OHP level of Spring, Summer, Autumn, and Winter were $0.21{\pm}0.12,\;0.10{\pm}0.17,\;0.16{\pm}0.12,\;0.17{\pm}0.14{\mu}g/g$ cr, respectively. The arithmetic means of urinary 1-OHP for four season tee $0.16{\pm}0.14 {\mu}g/g$ cr. There was a trend that urinary 1-OHP level of residents who dwelling in apartment were higher compared with detached home, Comparison of 1-OHP level between heating by kerosene and LPG, Much higher gas heating type than kerosene type (P<0.05). This result implies that the urinary 1-OHP can be applied as the PAHs exposure indices.