• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.32-42
• /
• 1998

Lean burn gasoline engine is recognized as a promising way to meet better fuel economy. Lean burn engine is classified into port injection and direct injection(DI), DI is more active technique for improving fuel economy with ultra-lean operation, Nowadays, port injected lean burn engine has been produced by many Japan maker. Also, DI engine is also possible for production owing to improvement in control technique of spray, flow air fuel ratio. DI engine uses either homogeneous stoichiometric mixture or stratified mixture by controlling injection timing to be early or late respectively. HM(homogeneous mixture) is worse than SM(stratified mixture) in view of ultra-lean operation in partical load and Nox reducion by using EGR control. But, HM has advanteges in cold starting and emission reduction during transient operation, This paper describes experimental variables and bench test results of HM GDI engine.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.791-798
• /
• 2007

The hydraulic hybrid vehicle(HHV) is an application of hydrostatic transmission technology to improve vehicle fuel economy and emissions. A relatively lower energy density of hydraulic accumulator and complicated coordinating operations between two power sources require a special energy management strategy to maximize the fuel saving potential. This paper presents a new type of configuration for parallel HHV to minimize the disadvantages of the hydraulic accumulator, as well as a methodology for developing an energy management strategy tailored specially for PHHV. Based on an analysis of the optimal energy distribution between two power sources over a representative urban driving cycle with a Dynamic Programming(DP) algorithm, a fuzzy-based optimal torque management strategy is designed and developed to control the torque distribution. Simulation results demonstrates that the optimal torque management strategy maximizes the advantages of this hybrid type of configuration, and the high power density characteristics of hydraulic technology effectively improve the robustness of the energy management strategy and fuel economy of the PHHV.

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.339-343
• /
• 2005

Hydrogen, as a future energy source, is thought as an alternative of fossil fuel in view of environment and energy security. Hydrogen has the properties of both fuel and electricity so that it can make the energy paradigm shift in the future. Therefore, researches on hydrogen in power system area are essential and urgent due to their huge effects on current paradigm. In this paper, the visions and technical challenges of hydrogen in power system are reviewed as energy storage, dispersed generation (DG), DC generator, and combined heat and power (CHP).

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.957-960
• /
• 2013

에코 드라이빙은 운전자에게 차량 성능을 알려주는 피드백 정보의 사용을 의미한다. 본 논문은 운전자에게 운전하는 동안 순간 연비를 표시하는 피드백 장치의 성능을 평가하였다. 약 67km의 도로를 주행하면서 상용차의 OBD 포트로부터 데이터를 측정하였다. 연료 효율에서 관찰된 변화는 연비가 10.6%가 향상되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.332-337
• /
• 2016

Turbocompounding is a key technology to satisfy the future requirements of diesel engine's fuel economy and emission reduction. A turbocompound diesel engine was developed based on a conventional 11-Liter heavy-duty diesel engine. The turbocompound system includes a power turbine, which is installed downstream of a Variable Geometry Turbocharger (VGT) turbine. The impacts of the VGT rack position on the turbocompound engine performance were studied. An optimal VGT control strategy was determined. Experimental results show that the turbocompound engine using the optimal VGT control strategy achieves better performance than the original engine under all full load operation conditions. The averaged and maximum reductions of the brake specific fuel consumption (BSFC) are 3% and 8% respectively.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.130-135
• /
• 2018

Currently the automobile market is developing eco-friendly vehicles in order to cope with fuel efficiency regulations. Many studies have been conducted to improve travel performance and fuel economy of the environment-friendly vehicles, and vehicle manufacturers study how to manufacture light-weight vehicles for improving fuel economy for both existing vehicles and environment-friendly vehicles. Exemplary light-weight vehicle technologies include optimal design of vehicle body structure which is a light-weight vehicle method by changing component shapes or layout to optimize the vehicle body structure and the new process technology for using new light-weight and very strong materials Various studies.

• 한국가시화정보학회지
• /
• 제21권2호
• /
• pp.102-110
• /
• 2023

With the global shift from a carbon-based economy to a hydrogen-based economy, understanding the sloshing phenomenon and its impact on boil-off rate (BOR) in liquid hydrogen (LH2) tank trailers is crucial. Here, we analyze the primary breakup process under sloshing phenomena in a liquid fuel tank. We observe the growth of multiple holes on the sheet-like structures and the formation of ligament structures reminiscent of jet atomization. Through the extraction of three-dimensional liquid regions, we analyze the geometrical characteristics of these regions, enabling the classification of sheets, ligaments, and droplets. The present findings could contribute to understanding the breakup mechanism and hold potential for the development of strategies aimed at minimizing BOR.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.636-639
• /
• 2009

Fuel consumption measurement of Hydrogen fuel cell vehicle is considerably different form internal combustion engine vehicle such as carbon balance method. A practical method of fuel Consumption measurement has been developed for Hydrogen fuel cell vehicles. There are three method of hydrogen fuel consumption testing, gravimetric, PVT(Pressure, Volume and temperature), and Coriolis mass flow, all of which necessitate physical measurements of the fuel supply. The purpose of this research is to measure the fuel consumption of hydrogen fuel cell vehicles on chassis-dynamometer and to give information when the research is intended to develop method to measure hydrogen fuel consumption.

• 에너지공학
• /
• 제25권4호
• /
• pp.159-169
• /
• 2016

본 연구에서는 함산소기재 중 MTBE를 휘발유에 첨가하여 산소함량(0, 1.0, 2.3 및 2.7 wt %)의 변화에 따라 MPI 및 GDi 차량에서 배출되는 유해한 배출가스와 연비를 분석하였다. 국내 및 미국의 연비시험방법인 FTP-75 mode와 HWFET mode를 적용하였다. CO, NMHC, NOx 배출량은 산소함량의 변화에 따라 미미한 차이는 있었지만 상관관계는 없었다. FTP-75 mode에서 CO2 배출량은 산소함량의 변화에 따라 증감의 경향성은 없었다. 하지만 차량이 예열된 상태이고 고속 운전영역이 포함된 FTP-75 mode의 phase-3와 HWFET mode에서는 산소를 함유한 연료의 CO2 배출량이 적었다. 입자개수 배출량은 산소함량과 음의 상관관계를 보였으며 산소함량 2.3 wt %에서 가장 적었다. 카본발란스법에 의해 계산된 연비는 산소를 함유한 연료가 높았으며 2.3 wt %에서 가장 높았다.

• 에너지공학
• /
• 제15권2호
• /
• pp.83-95
• /
• 2006

본 연구에서는 기준안으로 2040년까지 최종에너지의 15%를 수소로 대체한다는 목표를 세우고, 수소이용 효율이 가장 높은 수송부문을 주대상으로 2040년까지 자동차의 50% 이상을 연료전지 자동차로 대체하고, 기타, 가정 상업 및 산업부문에서도 각각 22%, 23%를 연료전지로 대체하는 계획을 수립하였다. 수소의 제조와 저장, 운반 등 공급인프라 부분에서는 2020년까지는 LNG와 석탄 등의 화석연료를 주원료로, 2040년까지는 신 재생에너지의 비중을 60%까지 늘리는 것으로 목표를 설정하였다. 기준안(수소비 중 15%)으로 제시한 수소경제가 실현되는 경우 1차에너지가 9% 저감되고, 석유가 22.7%, 원자력이 17.8%, LNG가 8.9%, 석탄이 3.1% 줄어들고 대신 신 재생에너지는 47.3% 증가하여 지속가능한 에너지믹스가 실현되는 것으로 나타났다. 이에 따라 에너지자급도의 개선, 에너지수입대체효과, 환경편익, 신성장동력으로서 수소 연료전지 산업 정착에 따른 고용창출효과 등 경제적 파급효과도 막대한 것으로 나타났다. 또한 수소경제의 적정산업규모를 갖추기 위한 투자비를 산출한 결과 2040년까지 총 200조원 이상이 필요하다. 방대한 재원을 조달하기 위해 민간자본의 유치와 정부의 효과적 정책개발이 요청된다. 수소경제의 비용효과적인 조기실현을 위해서는 전담기구의 신설과 민간의 전문인력 양성, 그리고 수소 연료전지 산업육성을 위한 규격 및 표준화 마련도 시급한 것으로 판단된다.