• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.25-33
• /
• 2014

As global warming becoming an environmentally serious issue, more attention is drawn to fuel consumption which is the direct source of green house gas emission. The fuel consumption by aircraft operation is not an exception. Motivated by the societal and environmental context, this paper explains a method for estimation of aircraft fuel consumed during their flights as well as the computational process using real flight track data. Applying so-called 'Total Energy Model' along with aircraft specific parameters provided in EUROCONTROL's Base of Aircraft Data (BADA) to aircraft radar track data, we estimate fuel consumption of individual aircraft flown between Gimpo and Jeju airports. We then assess the estimation accuracy by comparing the estimated fuel consumption with the actual one collected from an airline. The computational results are quite encouraging in that the method is able to estimate the actual fuel consumption within ${\pm}6{\sim}11%$ of error margin. The limitations and possible enhancements of the method are also discussed.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.247-256
• /
• 2012

Recently, estimation of greenhouse gas (GHG) emission has continuously emerged as an important global issue. This study compares various statistical methods for estimation of fuel consumption, which is necessary for calculation of GHG emission in road transportation sector. Existing methods have focused on using merely transportation fuel supply or distance traveled for calculation of fuel consumption. Estimates of GHG emission based on fuel supply, however, cannot reflect various vehicle types or model year. This study suggests and compares, from statistical point of view, several methods, which can be applied to estimate fuel consumption of each vehicle, by combining distance traveled and fuel efficiency (mileage), and total fuel consumption of all vehicles. It also suggests practical measures that can reflect vehicle types and model year to suggested methods for future research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.480-490
• /
• 2018

Recently, The MRV (monitoring, reporting and verification) regulation, which measures, reports and verifies the emission gas of vessel to head for member countries of Europe Union (EU), is being implemented. As part this reason, we develop a system that estimates simple fuel consumption and recommends optimized stop-over ports of vessel, to calculate amount of carbon emission. To do this, we analyze fuel, distance and time consumption between port and the other port based on stored voyage data for over 10 years of real-ship, and implement a simple fuel consumption estimation module using analyzed result. Also, we design and implement the optimized route recommendation algorithm, existing navigation route display function including comparison with the optimized routes and user custom route plan function. Therefore, we expect the developed system is helpful when makes a navigation route and so on by reference indexes and we anticipate the system to have a sense for future research which learns and predicts for accuracy result.

• Journal of Korea Trade
• /
• v.26 no.1
• /
• pp.113-125
• /
• 2022

Purpose - The primary purpose of this study is to verify whether the target set out by the International Maritime Organization (IMO) for reducing carbon emissions from ships can be achieved by quantitatively analyzing the trends in technological advances of fuel oil consumption in the container shipping market. To achieve this purpose, several scenarios are designed considering various options such as eco-friendly fuels, low-speed operation, and the growth in ship size. Design/methodology - The vessel size and speed used in prior studies are utilized to estimate the fuel oil consumption of container ships and the pace of technological progress and Energy Efficiency Design Index (EEDI) regulations are added. A database of 5,260 container ships, as of 2019, is used for multiple linear regression and quantile regression analyses. Findings - The fuel oil consumption of vessels is predominantly affected by their speed, followed by their size, and the annual technological progress is estimated to be 0.57%. As the quantile increases, the influence of ship size and pace of technological progress increases, while the influence of speed and coefficient of EEDI variables decreases. Originality/value - The conservative estimation of carbon emission drawn by a quantitative analysis of the technological progress concerning the fuel efficiency of container vessels shows that it is not possible to achieve IMO targets. Therefore, innovative efforts beyond the current scope of technological progress are required.

• Journal of Climate Change Research
• /
• v.6 no.2
• /
• pp.143-158
• /
• 2015

This study developed the emission intensity estimation method of GHGs by considering the characteristics of the models and time series. The telematics device was installed on the vehicle (OBD-II) to collect information on the operation conditions from each sample vehicle of public authorities. As a result of comparing the mileage distance and fuel consumption, the matching degree is analyzed very high, showed a ${\pm}1{\sim}4%$ error for each vehicle. By comparing driving record diary of vehicles managed by public authorities, this study presents the method that can be used to verify driving information in order to derive the GHGs emission intensity.

• Journal of Environmental Impact Assessment
• /
• v.21 no.2
• /
• pp.255-264
• /
• 2012

The present study attempts to understand the emission pattern of greenhouse gases in people's daily life through the estimation and analysis of the amount and characteristics of the greenhouse gases. Based on the survey of 1,000 people throughout the nation, monthly emission of greenhouse gases per-capita was estimated from their use of fuels, electricity, water, and personal and public transportation means in addition to their waste generation. In the case of personal car drivers, greenhouse gas emission was the greatest from their cars, followed by the emission from electricity, fuels, and public transportation. Emission from water consumption and waste generation was relatively low. Fuel consumption varied depending on the number of household members, their housing type, and the size of their living spaces. Results showed that single-person households emitted the largest amount of per-capita greenhouse gas while greenhouse gas emission from electricity was inversely proportional to the number of persons in a given household.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.4
• /
• pp.466-476
• /
• 2012

This study calculated monthly and sectoral (for industry, energy industry, transport, residential, commercial and public sectors) greenhouse gas (GHG) emissions of Seoul, Korea from 1999 until 2009 with following the IPCC 2006 Guideline for National Greenhouse Gas Inventories through an analysis on available monthly data of fossil fuel and electricity consumption for the period. The time series analysis showed that GHG emissions had significant cyclical pattern season by season with the highest peak in August and the lowest peak in January throughout the period. The analysis on monthly and sectoral energy consumption showed that residential, commercial and public sectors had emitted about 65% of total GHG emissions of Seoul and had consumed more energy in winter for heating. About 30% GHG of Seoul was emitted from transport sector but its monthly energy consumption showed irregular pattern and it consumed 80% petroleum (in 2009) of Seoul. Hopefully together with further study on this subject, it is expected that this study can be used as basic data for various research regarding Greenhouse gas baseline emission, energy consumption pattern and estimation for future GHG emission of Seoul.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.539-553
• /
• 2004

Up to the present time, many methods to estimate emissions from a particular diesel engines have wholly depended on the quantity of diesel fuel consumed. Then, the recommended emission factors were normalized by fuel consumption, and further total activity was estimated by the total fuel consumed. One of main purposes in the study is newly to develop emission factors for the railroad diesel rolling stock (RDRS) and to estimate a total amount of major gaseous pollutants from the RDRS in Korea. Prior to develop a Korean mode emission factor. the emission factor from the USEPA was simply applied for comparative studies. When applying the USEPA emission factors, total exhaust emissions from the RDRS in Korea were estimated by 28,117tons of NOx, 2,832.3tons of CO, and 1,237.5tons of HC, etc in 2001. In this study, a emission factor for the RDRS, so called the KoRail mode (the Korean Railroad mode) has been developed on the basis of analyzing the driving pattern of the Gyeongbu-Line especially for the line-haul mode. Explicitly to make the site specific emission factors, many uncertainty problems concerning weighting factors for each power mode, limited emission test, incomplete data for RDRS, and other important input parameters were extensively examined. Total exhaust emissions by KoRail mode in Korea were estimated by 10,960tons of NOx, and 4,622tons of CO, and so on in the year of 2001. The emissions estimated by the USEPA mode were 2.6 times higher for NOx, and 1.6 times lower for CO than those by the KoRail mode. As a conclusion, based on the emission calculated from both the USEPA mode and the KoRail mode, the RDRS is considered as one of the significant mobile sources for major gaseous pollutants and thus management plans an(1 control strategies for the RDRS must be established to improve air quality near future in Korea.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.457-465
• /
• 2018

Since IMO has discussed the effectuation of the EEDI, EEOI and SEEMP, each country, shipping company, shipbuilding company and research institute have been requested to prepare the design, construction and operation of the efficient ship. From the shipbuilding company's point of view, it was necessary to develop a method based on the maneuvering equations of motion in a bid to estimate the EEOI considering the design, model test results and the calculation results of the ship. In this paper, the estimation method of RPM, power and fuel consumption proposed in the previous research was developed to construct a framework that helps in the estimation of the EEOI. It was possible to estimate the EEOI from the estimated ship speed (distance), LNG cargo mass, fuel consumptions and emission factors according to the type of fuel. The rapid increase of the evaluated EEOI was observed when the LNGC with ME-GI engine executing the course changed with a large difference. This prompted the comparison of the type of fuel on the estimated EEOI by considering HFO, LNG fuel and MGO properties.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.278-287
• /
• 2015

The potential impact of aircraft emissions on the current and projected climate of our planet is one of the more important environmental issues facing the aviation industry. Increasing concern over the potential negative effects of greenhouse gas emissions has motivated the development of an aircraft emission estimation and prediction system as one of the ways to reduce aircraft emissions and mitigate the impact of aviation on climate. Hence, in this research, using Piano-X software which was developed by Lissys Co., fuel consumption and emissions for 3 types of aircraft were estimated for different design payloads with various flight distances and flight paths. Fuel burns for economy speed, long range cruise speed, maximum range speed were also investigated with various flight distances and altitudes.