• 한국가금학회지
• /
• 제29권3호
• /
• pp.177-183
• /
• 2002

산란기 한국산 꿩 난관의 술잔세포를 조직화학적으로 분비물의 성상을 관찰하여 다음과 같은 결과를 얻었다. 한국산 꿩 난관 깔때기부의 술잔세포는 황화산성점액물질과 비황화중성점액물을 함유하였다. 난관팽대부, 자궁의 관상샘 개구부, 질의 술잔세포는 황화산성점액물질, 비황화산성점액 물질과 중성점액물질을 함유하였다. 관상샘 개구부의 술잔세포를 제외한 자궁과 난관 좁은 부분의 술잔세포는 중성점액물질을 함유하였다. 한국산 꿩 난관 술잔세포 분비물질의 조직화학적 특징은 난관내의 알의 위치와 연관성이 없었다.

• 생명과학회지
• /
• 제11권6호
• /
• pp.595-602
• /
• 2001

The prelectin histochemical methods had been applied to study mucosubstances properties of esophageal mucous cells in four teleostean species, i, e.. sebastes schlegli, Halichoeres poecilopterus, Bryzoichtys lysimus and Takifugu pardalis. The following methods were used: periodic acid Scheff"s(PAS) reaction, alcian blue(AD) pH 2.5, AB pH 1.0, AB pH 2.5-PAS, aldehyde fuchsin (AF) pH 1.7-AB pH 2.5 and high iron diamine (HID)-AD pH 2.5 stainings. The number size and shape of esophasgeal mucous cells studied depend on the fish species. Esophageal mucous cells of Sebastes schlegli and Halichoeres poecilopterus were mixed with large, medium sized and small mucous cells, but these cells of the species were mixed with medium sized and small mucous cells. The large esophageal with moderate to considerable amount of acid mucin. Most of the large mucous cells in these species contained neutral mucin and strongly sulfomucin, whereas a few mucous cells contained neutral mucin, strongly sulfomucin, and sialomucin. Medium sized and small mucous cells of these species contained considerable to large amount of neutral mucin, and small to considerable amount of acid mucin, Most of the medium sized and small mucous cells contained neutral mucin and sialomucin, but a few mucous cells contained neutral mucin and strongly sulfomucin or neutral combined with strongly sulfomucin and sialomucin. Most of the esophageal mucous cells pf Bryzoichthys lysimus contained small amount of neutral mucin, while on the other hand a feww mucous cells contained small amount of neutral mucin and minimal amount of sialomucin. But the esophageal mucous cells of Takifugu pardalis contained considerable amount of neutral mucin only.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.56-62
• /
• 2000

The purpose of this study was to assess the effects of restorative materials on the marginal leakage of wedge-shaped class V cavity. The study was performed in vitro in 25 defect-free permanent, extracted teeth. Wedge-shaped class V cavities were prepared and then the teeth were randomly selected and restored according to the following. Group A : restoration with Tetric Ceram(composite resin) Group B : restoration with Tetric flow(flowable resin) Group C : restoration with Compoglass after acid etching(compomer) Group D : restoration with Compoglass(compomer) Group E : restoration with Fuji II LC improved(resin-modified GIC) After thermocycling, the specimens were immersed in 5% basic fuchsin solution for 6 hours and sectioned longitudinally through the center of the restoration. The degree of marginal leakage was measured as the extent of dye penetration under the stereomicroscope. The data were analysed using one-way ANOVA. When significant differences found, multiple comparisons were made using Duncan's Multiple Range Test. The results were as follows: 1. The occlusal margins of all groups except for Fuji II LC improved showed lesser leakage than gingival margins and there was statistically significant difference(p<0.05). 2. At the occlusal margins, group A, B showed same marginal leakage scores, and others were decreased as group C, D, E in that order. There were statistically significant difference between group A, Band group D, E, group C and group E(p<0.05). 3. At the gingival margins, group B, C showed same marginal leakage scores, and others were decreased as group A, D, E in that order. But there was statistically significant difference between group B, C and group E(p<0.05). 4. In the Compoglass restoration, acid-etching technique was beneficial for marginal sealing ability at all of margins. But there was no statistically significant difference (p>0.05). In the restorations for wedge-shaped class V cavities, resin restoration with acid etching technique is recommended.

• Animal cells and systems
• /
• 제11권2호
• /
• pp.183-189
• /
• 2007

To investigate the properties of mucosubstances of the epidermis in various teleostean species, conventional histochemical stainings were used on the skin in five species of order Perciformes, i. e., yellowtail, Seriota quinqueradiat, striped beakperch, Oplegnathus fasciatus, brown spotted grouper, Epinephelus chlorostigma, sea chub, Ditrema temmincki and multicolorfin rainbowfish, Halichoeres poecilopterus. The following methods were used: periodic acid Schiff (PAS), alcian blue (AB) pH at 2.5, AB pH at 1.0, AB pH at 2.5-PAS, AB pH at 1.0-PAS, aldehyde fuchsin (AF) pH at 1.7-AB pH at 2.5 and high iron diamine (HID)-AB pH at 2.5. The epidermis of all five species consisted of three layers: superficial, middle, and basal layer. The superficial layer was comprised of rather flattened cells. In particular, the outermost layer of striped beakperch and middle layer of sea chub consisted of mucus-secreting cells. Mucous cells, the unicellular glands, were found in epidermis but varied in number in different body regions and species. Although there was a slight difference in the amount in various species and body regions, the secretory contents of the mucous cells in the five teleostean species contained acidic mucopolysaccharides. In yellowtail, striped beakperch, and multicolorfin rainbowfish, the property of mucosubstances was identified as sialomucin, while it was sulphomucin in brown spotted grouper and sea chub.

• 미생물학회지
• /
• 제16권3호
• /
• pp.111-121
• /
• 1978

About 40 temperature-sensitive mutants have been isolated as a preliminary step to study the spore germination, the cell cycle, and the control of macromolecular synthesis in Aspergillus nidulans. To obtain temperature-sensitive mutants rapidly and effectively, the selective enrichment method using antifungal antibiotic nystatin was developed. Based on the data which had applied to the concentration of auxotrophic mutants by the earlier investigators, the optimal concentration and the time of treatment at the nonpermissive temeprature were determined as 50 to 100 units per ml and 4.5 hr., respectively. Out of 41 ts mutants assigned to the strain symbol PK, thirteen that seemed to be arrested at the earlystage of spore germination were subjected to the further cytological and genetic analysis. Elght of these mutants are able to form germ tube and five not. Staining with acid fuchsin for the 5PK strains shows that one irreversible mutant, PK6 strain able to form germ tube, accumulate mitotic spindle, being arrested in mitosis. Another PK15 and PK23 strain have more than one intact nucleolus without germ tube formation at the restrictive temperature. the temperature-senstive mutation in PK12 strain, the onlystrain which is able occurred in certain gene specific for the germination of spore. All of the ts markers are recessive and complement each other in heterokaryon between two different ts markers at the restrictive temperature.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.119-129
• /
• 1986

The purpose of this study was to evaluate the marginal leakage of glass ionomer cement with different cavosurface margins. 192 class V cavities were prepared on freshly extracted non-carious teeth and glass ionomer cement were inserted according to the manufacturer's instructions. Cavity preparations for this investigation were performed in four groups. The experimental specimens were made by packing the glass ionomer cement (Fuji Ionomer Type II G-C Co. Japan) into the prepared 192 cavities of four groups with different modes: Group I. - The 48 cavities with $90^{\circ}$ butt-joint cavosurface preparation and restored with glass ionomer cement. Group II. - The 48 cavities with butt-joint preparation modified by $135^{\circ}$ beveling the cavosurface in the dentin and restored with glass ionomer cement. Group III. - The 48 cavities with butt-joint preparation modified by cutting a chamfer in the dentin and restored with glass ionomer cement. Group IV. - The same 48 cavities as group I, and overfilled with glass ionomer cement beyond the cavosurface angle. And four groups above described divided into three subgroups by means of conditioning the cavity walls: Control group. - Glass ionomer cement filled in the prepared 64 cavities after being cleaned with a stream of tap water. Phosphoric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% phosphoric acid. Citric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% citric acid. All 192 specimens were immersed in the 2.0% basic fuchsin solution and subjected to thermal stress at one-minute intervals ($4{\pm}2^{\circ}C$ to $60{\pm}2^{\circ}C$) for 70 minutes before exposure to the dye. The specimens were sectioned ecclesiologically through the center of the restorations for different periods of immersion time, 24 hours, 7 days, 14 days 30 days. The sections were examined under a stereoscopic microscope. The results were as follows: 1. The degree of marginal leakage in group II and III was greater than that in group I and IV. 2. The degree of marginal leakage in phosphoric acid treatment group was similar with that in control group. 3. The degree of marginal leakage in citric acid treatment group was less than that in control group. 4. In all groups, the degree of marginal leakage in phosphoric acid treatment group was greater than that in citric acid treatment group. 5. There is no statistical difference of the degree of marginal leakage according to the immersion time in the dye solution.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.180-186
• /
• 2014

Objectives: The purpose of this in vitro study was to evaluate the microleakage and penetration of fissure sealant in permanent molar teeth with fluorosis after pretreatment of the occlusal surface. Materials and Methods: A total of 120 third molars with mild dental fluorosis were randomly divided into 6 groups (n = 20). The tooth surfaces were sealed with an unfilled resin fissure sealant (FS) material. The experimental groups included: 1) phosphoric acid etching (AE) + FS (control); 2) AE + One-Step Plus (OS, Bisco) + FS; 3) bur + AE + FS; 4) bur + AE + OS + FS; 5) Er:YAG laser + AE + FS; and 6) Er:YAG laser + AE + OS + FS. After thermocycling, the teeth were immersed in 0.5% fuchsin and sectioned. Proportions of mircoleakage (PM) and unfilled area (PUA) were measured by digital microscope. Results: Overall, there were significant differences among all groups in the PM (p = 0.00). Group 3 showed the greatest PM, and was significantly different from groups 2 to 6 (p < 0.05). Group 6 showed the lowest PM. Pretreatment with Er:YAG with or without adhesive led to less PM than bur pretreatment. There were no significant differences among groups in PUA. Conclusions: Conventional acid etching provided a similar degree of occlusal seal in teeth with fluorosis compared to those pretreated with a bur or Er:YAG laser. Pretreatment of pits and fissures with Er:YAG in teeth with fluorosis may be an alternative method before fissure sealant application.

• 한국수정란이식학회지
• /
• 제20권3호
• /
• pp.303-309
• /
• 2005

본 연구는 한우 난구 복합체의 체외성숙에서 OA가 미치는 영향에 대하여 조사하였다. 도축 한우암소의 난소로부터 난구 복합체를 채취하여 $0.1\%$ PVA-TCM199로 3회 이상 세정 후 $0.1\%$ PVA-TCM 199, 0.2 uM, 2 uM, 20 uM OA를 각각 첨가하여 $5\%\;CO_2,\;95\%$ 공기, $39^{\circ}C$에서 6, 12, 24시간 동안 체외성숙을 실시하였다. 또한 체외성숙시 cycloheximide(CX)와 OA와 체외성숙 효과를 확인하기 위하여 0.1M-PVA TCM199, CX 25 ug/mL, 동량의 CX를 6시간 처리한 후 2uM의 OA로 체외성숙을 실시하거나, 0.2 uM OA 단독으로 체외 성숙시켰다. 체외 성숙된 한우 난구 복합체의 핵형을 조사하기 위하여 $0.5\%$ hyaluronidase 용액으로 난구세포를 용해하고, 난자는 1:3 acetic acid, ethanol 용액에 30초간 고정하였으며, $3\%$ basic Fuchsin을 염색하여 핵형을 관찰하였다. 체외 성숙된 난자의 핵형 및 체외 발달율에 대한 통계분석은 3반복을 하여 얻어진 결과를 ANOVA test로 분석하였다. 한우 난구 복합체의 체외성숙율은 $0.1\%$ PVA-TCM199, 0.2 uM, 2 uM, 20 uM OA를 첨가시, 각각 72.0, 50.0, 70.9, $68.8\%$를 나타내어 유의적인 차이를 보였으며(p<0.05), CX와 OA가 한우 난구복합체에 미치는 영향을 조사한 결과, 0.1M-PVA, CX 25 ug/mL, 동량의 CX를 6시간 처리한 후 2uM의 OA로 체외성숙을 실시, 0.2 uM OA 단독처리시의 체외 성숙율은 각각 73.8, 7.2, 45.5, $73.7\%$를 나타냈어 극도의 유의적인 차이를 보였다(p<0.01). 미토콘드리아의 활성은 0.1M-PVA, CX 25 ug/mL, 동량의 CX를 6시간 처리한 후 2uM의 OA로 체외성숙을 실시, 0.2 uM OA 단독 처리시, 핵성숙기간 동안 증가하는 경 향을 보였고, CX 처리시 다른 처리와 비교하였을 때, 성숙 6시간에 1/3의 FI를 나타내었다. 이상의 결과를 미루어 OA는 한우 난구 복합체의 체외성숙에 중요한 조절물질이며, 핵성숙과정 중 미토콘드리아의 활성에도 중요한 역할을 하는 것으로 나타났다.

• Journal of Forest and Environmental Science
• /
• 제33권4호
• /
• pp.342-347
• /
• 2017

Since the first report of the oak wilt disease at 2004 in Korea, the disease distributed over Korean peninsula and are still giving severe damages. The management of oak wilt disease in Korea has mainly focused on the control of insect vector, Platypus koryoensis. Neverthless the effective method for evaluating the pathogenicity of the pathogen, Raffaelea quercus-mongolicae (Rqm), and for screening chemical or biological agents with strong inhibitory activity against the pathogen, is absolutely necessary, an reliable method is not available so far. This study was conducted to develop the effective method for evaluating the pathogenicity of Rqm in oak trees. The culture suspensions of Rqm were artificially injected to the saplings of Quercus acutissima by using ChemJet tree injector. Three months after treatments, the treated saplings were cut and dipped into 1% fuchsin acid solution. There were significant differences in non-conductive area (%), discoloration area (%) and vertical discoloration length between the pathogen-injected and distilled water-injected control treatments. These results indicated that the pathogen is the causal agent for the dysfunction of water conductive tissue, which will finally result in wilt symptom. Re-isolation of the pathogen and PCR detection using specific primers for the pathogen also confirmed the presence of Rqm in the sapwood chips of the pathogen-injected saplings. These observations would be greatly applied to other related researches for evaluating the pathogenicity of tree wilt pathogens and biocontrol efficacy of the selected antagonistic microorganisms, in case that the wilt symptom is not easily shown by artificial inoculation of the causal agent.

• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.1-10
• /
• 1993

The purpose of this study was to evlauate the microleakage of 3 dentin bonding agents using different dentin pretreatment method under simulated physilogic pressure in cementing the porcelain laminate veneer. Noncarious 60 human maxillary molars were selected and randomly assigned to 4 groups of 15 each. The group with the margin placed on the enamel was classified as the control and the groups with the margin placed on root surface were subdivided into 3 groups according to the dentin bonding agents used. The group using All Bond 2 was classified as experimental group 1, the group using Scotchbond MP was classified as experimental group 2, and the group using Gluma was classified as experimental group 3. Roots were removed at 3mm below the cementoenamel junction, and reductions of the teeth for the porcelain laminate veneer were done on the mesial 1/2 of the buccal surface of each teeth. The pulp was extirpated and the pulp chamber was cleaned with 37% phosphoric acid for the patency of dentinal tubule. Under simulated physiologic pressure, porcelain laminate veneers were cemented to the teeth using each dentin bonding agent and luting cement. After cementation, all samples were stored at 36t in water for 24 hours and thermocycled for 1500 cycles, then immersed in 0.5% basic fuchsin solution and the teeth were sectioned longitudinally by using diamond saw and the extent of microleakage was measured. The following results were obtained, 1. Microleakage was observed in a few samples of control group but all the samples of experimental groups. 2. The control group showed the less extent of microleakage than the experimental groups. In experimental groups the experimental group 1 & the experimental group 2 showed similiar extent of microleakage and the experimental group 3 showed the greater extent of microleakage than other groups. Conclusively, practicing the porcelain laminate veneers in the clinic, although the margin of the porcelain laminate veneer should be placed on enamel, in the case that it is inevitable to place the margin of the porcelain laminate veneer on the root surface, it is recommened to use dentin bonding agents which use no dentin pretreatment or a dentin pretreatment which can leave the smear plugs.