• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.383-387
• /
• 2005

LSIV와 같이 영상해석기술을 이용한 유속측정방법은 하천의 표면유속을 측정하기 때문에 유량 산정을 위해서는 측정된 표면유속을 평균유속으로 환산할 수 있는 방법이 필요하다. 본 연구에서는 LSIV를 하천 유량 측정에 적용하기 위해서 개수로 흐름의 연직유속분포에 대한 기존 이론을 검토하고 하상 및 흐름조건에 대한 수리실험을 통해 표면유속으로부터 평균유속을 추정할 수 있는 방법을 제시하였으며, 이를 실제 하천 측정을 통해 검증하였다. 수리실험결과 수표면 영역의 유속감소를 확인하였으며, 이러한 유속감소는 조도에 비해 Froude 수의 영향이 더 큰 것으로 나타났다. 이러한 실험결과로부터 표면유속으로부터 평균유속을 추정하기 위해, 표면유속 보정량을 이용하여 후류법칙의 유속분포를 보정하는 방법과 평균유속과 표면유속의 비를 이용한 방법을 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1838-1842
• /
• 2008

본 연구에서는 하구 유입 하천에서 발생하는 염수쐐기의 형상 및 거동특성을 구명하기 위하여 정상상태 염수쐐기 실험을 수행하였다. 길이에 비해 상대적으로 폭이 좁은 개수로의 상류부분에는 담수를 지속적으로 공급할 수 있는 담수공급장치를 설치하였고, 정상상태의 염수쐐기를 발생시키기 위하여 염수수조 측면에 지속적으로 염수를 공급할 수 있는 염수공급수조를 설치하였다. 실험조건은 담수 방류량과 이층류의 밀도차의 영향을 고려한 밀도프루드수(densimetric Froude number)를 기준으로 선정하였다. 실험결과 각 케이스별 염수쐐기의 형상은 중앙부에서 약간의 산포된 양상을 제외하고는 거의 선형을 이루는 것으로 관찰되었다. 경계층의 형상과 두께는 이층류의 농도장을 측정하고 밀도변동성분을 고려한 표준편차를 통하여 산정하였다. 그리고 염수쐐기의 선단부에 해당하는 리차드슨수와 경계층 두께와의 비교 등을 통해서 경계층의 양상을 파악하였다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.109-112
• /
• 2012

선박의 저항을 추정하는 일은 선박설계에 있어 가장 기본적인 작업이다. 그러나 선박의 크기는 매우 크기 때문에 일반적으로 모형선 실험을 통해 선박의 저항을 추정한다. 이 때, 모형선 실험은 Froude 수를 기준으로 수행하게 되는데 이 때문에 모형선과 실선의 Reynolds 수가 서로 다른 영역에 놓이게 된다. 따라서 모형선 실험에서 얻어진 데이터를 실선에 그대로 적용할 수 없기 때문에 모형선-실선 저항추정법을 사용하게 된다. 본 연구에서는 이러한 모형선-실선 저항추정법에 사용되고 있는 2 차원 외삽법을 살펴보고 이 기법에 사용되고 있는 ITTC 마찰저항곡선을 등가평판 주위의 유동장 해석결과와 비교하였으며 ITTC 마찰저항곡선에 대해 고찰하였다.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.85-94
• /
• 2006

In this study, scaled model tests were carried out to decide the optimal critical velocity, to prevent back layering in the case of fire in a long traffic tunnel. Realistic estimates were made for the time required for people to escape ken the tunnel and far the time required by the ventilation operator to increase the system speed to full capacity. The analysis, predicts that the emergency ventilation will start about 240 seconds after the tunnel fire. It was also found that prevention of back layering would occur within 4 minutes after fan operation. To find out optimal critical velocity, a 1/50 scaled model tunnel(diameter : 0.2 m and length : 20 m) based on the Froude similarity technique was constructed. Changing $\beta$ values in the Tetzner's equation, smoke propagation was observed. From the experiment, it was concluded that using a $\beta$ value of 0.5 to prevent back layering successfully allowed time for safe evacuation.

• Journal of Korea Water Resources Association
• /
• v.51 no.2
• /
• pp.109-120
• /
• 2018

In this study, we conducted flume experiments to investigate the three-dimensional flow structures around a half-submerged spur dike in a straight open channel flume. The experiments were carried out under the two different Froude numbers, 0.10 and 0.18. The results were compared with the previous experimental result conducted for non-submerged spur dike. Three-dimensional instantaneous velocities were measured using Acoustic Doppler Velocimetry (ADV) and water elevation data were collected using ultra sonic distance sensor. The results show that submergence conditions of the spur dike largely influence the three-dimensional flow structures around a spur dike.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.108-117
• /
• 2011

Old train carriages have been used to create artificial reefs (AR) as part of programs to enhance ocean fisheries and recreational resources. This study conducted hydraulic modeling experiments to estimate the structural stability of a train carriage AR. By applying fixed- and movable-bed conditions and Froude similitude, theoretical and hydraulic experiments revealed major design forces(e.g., water waves and currents). The results of this study showed that some dimensionless design parameters (e.g., surf similarity parameters, water particle velocity, scouring, and deposition) also affect the stability of an AR under various wave and current field conditions. In the fixed-bed condition, movement of the AR occurred when dimensionless water particle velocity based on the surf similarity parameter was larger than about 0.32. In the moveable-bed condition, the settlement depth (field values) of the AR ranged from 6 to 30 cm. The results indicated that characteristics of the sediment/bed condition and the direction of external forces acting on an AR should be considered when selecting AR sites.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.4
• /
• pp.269-278
• /
• 2004

Recently, critical velocity has become a topic to attract most interests from the researchers in the field of tunnel safety. As the minimum velocity to prevent smoke backlayering during a fire, many equations have been proposed so far, and the following three equations are being considered as a standard method in Korea to calculate the capacity of smoke extraction fans. Equation by Kennedy based on Froude number, Tetzner' s equation with additional variable, ${\beta}$ to modify the Kennedy's equation, and the equation with the concept of super critical velocity by Wu are studied in this paper for the comparative purpose. A contour map describing the relationship between the critical velocity and the capacity of smoke extraction fans is proposed as a tool to calculate the number of jet fans for smoke control during a fire in the local tunnels.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1395-1404
• /
• 1994

Transverse bed slope in bend is a subject of scientific investigation since it provides the necessary information for channel design and protection of hydraulic structures (bank, bridge, etc), and study of river morphology. In this paper, selected models were examined and compared for the value of prediction of the transverse bed slope in curved alluvial channels(project area), by using field data, and fitting model was proposed. All models that related the local transverse bed slope to mean flow characteristics were alike in the sense that they predicted the local transverse bed slope to be proportional to the ratio between depth and radius of curvature. The difference among the models was related with the factor of proportionality, K. Also, measured transverse bed slope was correlated to mean velocity, maximum depth, and density Froude number in channel bend. In this paper selected models were compared for the prediction of the transverse bed slope using Odgaard's experiment (obtained in Sacramento River bend), so Odgaard89 model was closely related with real transverse bed slope.

• Ecology and Resilient Infrastructure
• /
• v.1 no.1
• /
• pp.29-38
• /
• 2014

This study analyzed shear stress and erosion characteristic of a vegetated levee embankment with root fiber quantity, which is an important factor for evaluating the stability of it. The averaged root fiber quantity in a vegetated levee revetment was measured by the sampler manufactured by this research. The Phragmites Japonica Steud which is somewhat dominant species in a vegetated levee embankment was selected as an experimental vegetation. As a result of experiment of each flow regime, the shear stress was increased while root fiber quantity was increased and the erosion rate was exponentially decreased as the root fiber quantity was increased. The erosion rate was exponentially decreased as the shear stress was increased which is shown that the increase of shear stress by root fiber quantity results in the increase of erosion resistance in a vegetated soil. The relationship between shear stress and erosion rate with root fiber quantity were analyzed and their regression equations were suggested with high determination coefficients. The hydraulic stability is governed by the increase of shear stress by root fiber quantity and the Froude number of flow characteristic in a vegetated levee revetment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.656-665
• /
• 2021

In this study, trim tabs were attached to end of stern hull of a small high-speed vessel of length approximately 10 m and Froude number 1.0 to improve resistance performance and passenger comfort. Before computational fluid dynamics (CFD) simulations to assess the performance according to various geometries of the trim tab, the scale effect had been found through a previous study, so full-scale simulations were performed. The trim tab chord length was set to 0.5 %, 1.0 % and 1.5 % of L_PP, and its angle to base line was varied in intervals of 5°. It decreased trim by stern and flotation: the greater the angle and length, the greater was the effect. Then it had pressure resistance decreased and shear resistance increased, and reduction ratio of total resistance varied accordingly. The results of this study indicated that the resistance performance was improved about 27 % at optimal running attitude that was the trim by stern about 1.5°.