• 한국광학회지
• /
• 제17권4호
• /
• pp.359-365
• /
• 2006

광학계의 파면오차는 광학계의 성능을 나타내는 주요 지표이며, 광학면의 변형에 의해 발생한다. 광기계의 개발에 있어서 주요 하중조건에서 발생하는 파면오차 양은 중요 규격으로 설정되고 관리되어 진다. 광학면의 변형은 유한요소해석 등의 발달과 더불어 정확한 수준까지 계산할 수 있게 되었다. 유한요소해석 결과로부터 파면오차를 계산하기 위해서는 광학면에서의 변형량을 근사하고 분석해야 한다. 이를 위해 추가적인 격자나 요소망으로 결과를 변화하여 근사하는 방법이 사용되고 있으나, 격자 구성의 번거로움과 변환으로 인한 오차 발생 소지를 가지고 있다. 본 연구에서는 추가적인 격자의 구성없이 절점 정보만으로 효과적인 근사를 할 수 있는 이동 최소제곱 근사법을 사용하여 변형량을 근사하고 파면오차를 계산하는 방법을 제안하였다. 제안된 방법의 효용성을 보이기 위하여 해양탑재체 스캔 미러의 자중에 의한 파면오차를 계산하였고, 기존의 방법과 비교 분석하였다.

• 대한토목학회논문집
• /
• 제12권2호
• /
• pp.21-33
• /
• 1992

충격하중을 받는 구조물은 초고압에서 부터 저압까지 다양한 압력을 짧은 시간에 경험하게 된다. 따라서 이들 구조물을 해석하기 위해서는 실제 물체의 재료특성을 표현할 수 있는 구성 법칙(constitutive law)이 필요하게 된다. 본 연구에서는 압력 부종속모델(pressure independent model)인 Von-Mises 모델과 압력 종속모델(pressure dependent model)인 Drucker-Prager 모델을 사용하여 충격과 폭발 현상시 발생하는 응력파의 전파과정(propagation process)을 재료특성에 따라 비교 분석하였다. 응력파의 전파과정을 연구하기 위한 지배 방정식(governing equation)으로서는 물체에 종속되어 있는 라그란지안 좌표계(lagrangian coordinate system)로 표현된 운동량과 질량보존(conservation of momentum and mass)법칙을 사용하였으며 또한 충격전면(shock front)에 연속성을 부여하기 위해 인공점성(artificial viscosity)을 운동량 보존식에 첨가하였다. 주요 방정식을 풀기 위한 수치해석법으로는 시간과 공간 좌표계로 구성된 유한차분법(finite difference method)을 사용하였으며 소성변형률을 구하기 위한 소성이론으로서는 Associated normality flow rule을 사용하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
• /
• pp.191-200
• /
• 2005

본 연구는 Cr 투여가 태권도 선수들에게 운동 수행능력, 혈장요소 및 무산소성 파워에 어떠한 영향을 미치는지를 규명하기 위하여 수행되었다. 이를 위하여 남자 고등학교 태권도 선수를 대상으로 위약집단, Cr 투여 집단으로 구분하여 Cr을 투여한 후 Cr 투여는 태권도 선수들에게 있어서 효과적인 영양 보조물 방법이고, 단기간의 Cr loading으로도 운동수행력의 향상에 긍정적인 영향을 미칠 수 있음을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제48권1호
• /
• pp.41-56
• /
• 2013

Initiation and growth of delamination is a great concern of designers of composite structures. Interface elements with de-cohesive constitutive law in the content of continuum damage mechanics can be used to predict initiation and growth of delamination in single and mixed mode conditions. In this paper, an interface element based on the cohesive zone method has been developed to simulate delaminatoin growth of post-buckled laminate under fatigue loading. The model was programmed as the user element and user material by the "User Programmable Features" in ANSYS finite element software. The interface element is a three-dimensional 20 node brick with small thickness. Because of mixed-mode condition of stress field at the delamination-front of post-buckled laminates, a mixed-mode bilinear constitutive law has been used as user material in this model. The constitutive law of interface element has been verified by modelling of a single element. A composite laminate with initial delamination under quasi-static compressive Loading available from literature has been remodeled with the present approach. Moreover, it will be shown that, the closer the delamination to the free surface of laminate, the slower the delamination growth under compressive fatigue loading. The effects of laminate configuration on delamination growth are also investigated.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.144-155
• /
• 2000

초록 The validity, of a single parameter such as stress intensity, factor K or J-integral in traditional fracture mechanics depends strongly on the geometry, and loading condition. Therefore the second parameter like T-stress measuring the stress constraint is additionally needed to characterize the general crack-tip fields. While many, research works have been done to verify, the J-T description of elastic-plastic crack-tip stress fields in plane strain specimens, limited works (especially. for bimaterials) have been performed to describe the structural surface crack-front stress fields with the two parameters. On this background, via detailed three dimensional finite element analyses for surface-cracked plates and straight pipes of homogeneous materials and bimaterials under various loadings, we investigate the extended validity or limitation of the two parameter approach. We here first develop a full 3D mesh generating program for semi-elliptical surface cracks, and calculate elastic T-stress from the obtained finite element stress field. Comparing the J-T predictions to the elastic-plastic stresses from 3D finite element analyses. we then confirm the extended validity of fracture mechanics methodology based on the J-T two parameters in characterizing the surface crack-front fields of welded plates and pipes under various loadings.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.190-204
• /
• 2016

An active front end (AFE) is required for a three-phase induction motor (IM) fed by a voltage source inverter (VSI), because of the increasing need to derive quality current from the utility end without sacrificing the power factor (PF). This study investigates a proportional-plus-integral (PI) controller based AFE topology that uses a super-lift converter (SLC). The significance of the proposed SLC, which converts rectified AC supply to geometrically proceed ripple-free DC supply, is explained. Variations in several power quality parameters in the intended IM drive for 0% and 100% loading conditions are demonstrated. A simulation is conducted by using MATLAB/Simulink software, and a prototype is built with a field programmable gate array (FPGA) Spartan-6 processor. Simulation results are correlated with the experimental results obtained from a 0.5 HP IM drive prototype with speed feedback and a voltage/frequency (V/f) control strategy. The proposed AFE topology using SLC is suitable for three-phase IM drives, considering the supply end PF, the DC-link voltage and current, the total harmonic distortion (THD) in supply current, and the speed response of IM.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.248-251
• /
• 2004

The vibrational behavior of a front load washing machine is heavily influenced by the floor stiffness on which the washing machine is installed. In case the floor stiffness is extremely low like a wooden floor (we call it a 'soft floor, S/F'), it is quite probable that a washer's rigid body mode exists in the operating frequency range. In this case, the outer frame vibration level would be very high, but the mitigation scheme is quite limited except the excitation force abatement by acquisition of the optimal inertia in the internal vibratory system and the diaphragm's stiffness with the minimum force transfer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.359-364
• /
• 2004

In this study, experiments were tried on the mixed-mode I+II single overloading model which changes the loading mode of overload and fatigue load. Aspects of deformation field in front of the crack which is formed by mixed-mode I+II single overloading were experimentally studied. Then the shape and size of mixed-mode plastic zone were approximately calculated. The propagation behavior of fatigue crack was examined under the test conditions combined by changing the loading mode. The behavior of fatigue cracks were greatly affected by shapes of plastic deformation field and applying mode of fatigue load. Accuracy of prediction and evaluation for fatigue life may be improved by considering all aspects of deformation and behavior of fatigue cracks.

• ETRI Journal
• /
• 제34권1호
• /
• pp.118-121
• /
• 2012

In this letter, a miniaturized log-periodic dipole array (LPDA) antenna operating from 1 GHz to 6 GHz is proposed for portable direction finding applications. To reduce the lateral size of an LPDA antenna, bow-tie elements and a top-loading technique are utilized and spacing factor is decreased to reduce the spacing between the LPDA elements. The proposed miniaturized LPDA antenna has the measured gain and front-to-back ratio ranging from 1.2 dBi to 3 dBi and from 7 dB to 22 dB, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.431-436
• /
• 2001

A finite analysis of tractor cabin for ROPS design was performed. Finite element model was made to take account of the tractor cabin structures. Four tests were defined in OECD standard; (1) longitudinal loading (2) rear crushing test (3) side loading (4) front crushing test. The results of four independent analyses and sequential analysis are compared with test results.