• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.97-104
• /
• 2008

도로변에는 다양한 부정형의 구조물들이 방호되지 않은 채 노출되어 있어서 통행차량에 큰 위험요소가 되고 있다. 이러한 부정형 구조물을 효과적으로 방호하는 수단으로 구조물 앞에 에너지흡수형 모듈을 적층구조로 쌓는 방법이 있다. 본 논문은 EPS블록으로 구성된 모듈타입의 충격흡수장치를 차량과 충격흡수장치간의 에너지 평형원리를 이용하여 해석하는 방법을 소개하고 0.9ton-500km/h, 0.9ton-60km/h and 0.9ton-70km/h의 충돌조건에 대한 수치 예제로 설명하였다. 이 방법은 최대가속도, 충돌변형에 걸리는 시간 모든 모듈에 대한 변형이 완료되기 전에 차량의 완전한 정지여부 등에 대한 예측을 가능하게 하지만, 모듈 수만큼의 매우 듬성듬성한 속도 및 가속도 데이터를 주기 때문에 RA와 OIV같은 안전지수를 구하기 위해서는 보간법을 이용한 데이터 수의 확대가 필요하다. 선형 및 스플라인 보간법을 이용하여 안전도를 분석하고 결과를 비교 분석하였다.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.621-633
• /
• 2015

This paper proposes the analysis and design of a DC-side symmetrical zero-current-switching (ZCS) Class-D current-source driven resonant rectifier to improve the low power-factor and high line current harmonic distortion of lighting applications. An analysis of the junction capacitance effect of Class-D ZCS rectifier diodes, which has a significant impact on line current harmonic distortion, is discussed in this paper. The design procedure is based on the principle of the symmetrical Class-D ZCS rectifier, which ensures more accurate results and provides a more systematic and feasible analysis methodology. Improvement in the power quality is achieved by using the output characteristics of the DC-side Class-D ZCS rectifier, which is inserted between the front-end bridge-rectifier and the bulk-filter capacitor. By using this symmetrical topology, the conduction angle of the bridge-rectifier diode current is increased and the low line harmonic distortion and power-factor near unity were naturally achieved. The peak and ripple values of the line current are also reduced, which allows for a reduced filter-inductor volume of the electromagnetic interference (EMI) filter. In addition, low-cost standard-recovery diodes can be employed as a bridge-rectifier. The validity of the theoretical analysis is confirmed by simulation and experimental results.

• 대한기계학회논문집B
• /
• 제36권11호
• /
• pp.1135-1140
• /
• 2012

마스크를 이용하여 니켈 시드층의 형성 후 실버 도금을 통해 태양전지 상부전극을 형성하는 2 단계 전극형성 공정이 태양전지의 고효율화 방안으로 제안되었다. 본 연구에서는, 자외선 경화형 혹은 상변화 잉크를 고비용의 인쇄공정을 통해 마스크를 형성하는 방법을 대신하여, 코팅과 레이저의 복합공정을 통해 마스크를 형성하는 방법에 대해 제안하도록 한다. 마스크를 형성하는 물질로서 저비용의 저융점 왁스 혹은 플루오르카본 용액을 태양전지 웨이퍼 상에 코팅 후 레이저로 선택적으로 제거하여 전극패턴을 형성하였으며, 플루오르카본 용액 코팅이 왁스 코팅보다 패턴 균일도 측면에서 우수할 뿐만 아니라 통계적으로 0.16% 태양전지 효율증대를 유발한다는 점이 발견되었다.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.1-9
• /
• 2010

본 연구의 목적은 저속충돌에서 승용차량의 범퍼체결구조를 분석하기 위한 것이다. 차량의 손상성-수리성 향상 연구를 위해 범퍼체결구조가 서로 상이한 3개 차종에 대해 RCAR(세계자동차 수리기술위원회)의 저속충돌시험(전,후면 40% 오프셋 충돌시험) 기준을 적용하였다. 시험결과 충격흡수능력은 직사각형 단면형상을 가지고 그 부분이 범퍼레일에 삽입되는 크래시박스식의 범퍼스테이가 대부분의 차량에 적용되고 있는 다른 두 유형의 범퍼체결구조에 비해 우수하게 나타났다. 우수하게 설계된 직사각형 단면형상을 가지는 범퍼체결구조가 저속충돌사고 시 차량의 손상성-수리성을 향상시킴으로써 승객의 안전성도 강화시킬뿐만 아니라 수리비 절감에도 기여할 수 있다는 것이 본 연구에서 입증되었다.

• 한국유기농업학회지
• /
• 제9권1호
• /
• pp.1-16
• /
• 2001

With increasing global concern that intensively synthetic-chemical based farming systems accelerated the decline in environmental quality, the sustainability of modem agriculture became the subject of great concern. It is well known that the movement of Community Supported Agriculture(CSA) has been contributed significantly to the development of organic agriculture in USA and Japan. It was supposed that CSA could be one of the best way to promote the movement of organic agriculture since there is little reliability on the organically grown food by consumer. In this paper it was focussed to study the movement of CSA in USA and Europe in order to provide an idea for establishment and movement of CSA in Korea to support the organic agriculture. In a CSA system, the farmer grows food for a group of shareholders who pledge to buy a portion of the farm's crop that season. This arrangement gives growers up-front cash to finance their operation and higher prices for produce, since the middleman has been eliminated. For most shareholder for CSA saving money is a secondary consideration, but fresh safe products and environmentally sound farming system. People become shareholder of CSA since they expect an organic farming which can ; \circled1protect the environment, minimize pollution, promote health, \circled2replenish and maintain long-term soil fertility by providing optimal conditions for soil biological activity, \circled3maintain diversity within the farming system and its surroundings and protect plant and wildlife habit, \circled4recycle materials and resources to the greatest extent possible within the farm and its surrounding community, \circled5maintain the integrity of organic food and processed products through each step of the process from planting to consumption, \circled6develop and adopt new technologies with consideration for their long range social and ecological impact. In all CSAs, the farmer develops a crop plan and a budget, which details costs for a growing season, including fair wages for the farmers. Experienced Information on increasing shareholder retention, the future of CSA, and getting started such as ideas for ongoing marketing, printed materials that set realistic expectations, working members, production, pick-up and delivery, setting prices, and receiving feedback were also briefly introduced.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.87-90
• /
• 2005

The FORMOSAT-3/COSMIC mission is a micro satellite mission to deploy a constellation of six micro satellites at low Earth orbits. The final mission orbit is of an altitude of 750-800 lan. It is a collaborative Taiwan-USA science experiment. Each satellite consists of three science payloads in which the GPS occultation experiment (GOX) payload will collect the GPS signals for the studies of meteorology, climate, space weather, and geodesy. The GOX onboard FORMOSAT -3 is designed as a GPS receiver with 4 antennas. The fore and aft limb antennas are installed on the front and back sides, respectively, and as well as the two precise orbit determination (POD) antennas. The precise orbit information is needed for both the occultation inversion and geodetic research. However, the instrument associated errors, such as the antenna phase center offset and even the different cable delay due to the geometric configuration of fore- and aft-positions of the POD antennas produce error on the orbit. Thus, the focus of this study is to investigate the impact of POD antenna parameter on the determination of precise satellite orbit. Furthermore, the effect of the accuracy of the determined satellite orbit on the retrieved atmospheric and ionospheric parameters is also examined. The CHAMP data, the FORMOSAT-3 satellite and orbit parameters, the Bernese 5.0 software, and the occultation data processing system are used in this work. The results show that 8 cm error on the POD antenna phase center can result in ~8 cm bias on the determined orbit and subsequently cause 0.2 K deviation on the retrieved atmospheric temperature at altitudes above 10 lan.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.107-113
• /
• 2017

This study describes (1) the impact of positive sampling artifacts caused by not only a filter-based sampling, but also a denuder-based sampling in the determination of particle-phase organic carbon (POC), (2) the effect of sample flow rate on positive artifacts, and (3) an optimum flow rate that provides a minimized negative sampling artifact for the denuder-based sampling method. To achieve the goals of this study, four different sampling media combinations were employed: (1) Quartz filter-alone (Q-alone), (2) quartz filter behind quartz-fiber filter (QBQ), (3) quartz filter and quartz filter behind Teflon filter (Q-QBT), and (4) quartz filter behind carbon-based denuder (Denuder-Q). The measurement of ambient POC was carried out in an urban area. In addition, to determine gas-phase OC (GOC) removal efficiency of the denuder, a Teflon filter and a quartz filter were deployed upstream and downstream of the denuder, respectively with varying sample flow rates: 5, 10, 20, and 30 LPM. It was found that Q-alone sampling configuration showed a higher POC than QBQ, Q-QBT, and Denuder-Q by 12%, 28%, and 23%, respectively at a sample flow rate of 20 LPM due to no correction for positive artifact caused by adsorption of GOC onto the filter. A lower quantity of GOC was collected from the backup quartz filter on QBQ than that from Q-QBT. This was because GOC was not in equilibrium with that adsorbed on the front quartz filter of QBQ during the sampling period. It is observed that the loss of particle number and mass across the denuder increases with decreasing sample flow rate. The contribution o f positive arti facts to POC decreased with increasing sample flow rate, showing 29%, 25%, and 22% for 10, 20, and 30 LPM, respectively. The 20 LPM turns out to be the optimum sample flow rate for both filter and denuder-based POC sampling.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.36-45
• /
• 2014

Pedestrian to vehicle traffic accidents show a very high mortality rate compared to the frequency of occurrence. In order to improve the pedestrian protection performance of the vehicle, the korean government added a "pedestrian safety" entry from the year 2007. The performance for pedestrian protection of current vehicles gradually improved compared to the past, but it is still insufficient. It was found that the pedestrian protection performance was very weak, such as the top of the bonnet, the A-pillar and under the front windshield. A application of an active hood and pedestrian protection airbags can be countermeasures for these weak points of pedestrian safety. The active hood and pedestrian protection airbags are designed and manufactured to apply to the top of the hood and to the bottom of the windshield. The manufactured system is equipped in a test vehicle and evaluated based on the Korea New Car Assessment Program(KNCAP) test procedures for the performance of pedestrian safety. As a result, the outstanding effect of pedestrian protection has been achieved by the active hood and the pedestrian protection airbag. The rates of pedestrian injury are reduced by 82.2% and 95.4%, respectively.

• 열처리공학회지
• /
• 제23권1호
• /
• pp.23-28
• /
• 2010

The cylindrical magnetron sputtering has not been widely used, although this system is useful for only certain types of applications such as fiber coatings. This paper presents electrode configurations which improved the complicacy of the target assembly by using the positive voltage power supply. It is a modified type which has a target constructed with a large cylindrical part, a conical part and a small cylindrical part. When positive voltage was applied to an anode, a stable glow discharge was established and a high deposition rate was obtained. The substrate bias current was monitored to estimate the effect of ion bombardment. As a result, it was found that the substrate current was large. With cylindrical and conical cathode magnetron sputter deposition on the surface of the substrate to prevent re-sputtering, ion impact because it can increase the effectiveness with excellent ductility and adhesion of Ti film deposition can be obtained. We board at the front end of the ground resistance of $5\;k{\Omega}$ attached to the substrate potential can be controlled easily, and Ti film deposition with excellent adhesion can be obtained. Microstructure and morphology of Ti films deposited on pure Cu wires were investigated by scanning electron microscopy in relation to preparation conditions. High level ion bombardment was found to be effective in obtaining a good adhesion for Cu wire coatings.

• Advances in environmental research
• /
• 제4권4호
• /
• pp.247-262
• /
• 2015

The few lignin biomarker studies conducted in tropical environments are hampered by having to use references signatures established for plants and soils characteristic of the temperate zone. This study presents a lignin biomarker analysis (vanillyls (V), p-hydroxyls (P), syringyls (S), cinnamyls (C)) of the dominant plant species and soil horizons as well as an analysis of the interrelated terrigenous organic matter (TOM) dynamics between vegetation and soil of the $Tapaj{\acute{o}}s$ river region, an active colonization front in the Brazilian Amazon. We collected and analyzed samples from 17 fresh dominant plant species and 48 soil cores at three depths (0-5 cm, 20-25 cm, 50-55 cm) from primary rainforest, fallow forest, subsistence agriculture fields and pastures. Lignin signatures in tropical plants clearly distinguish from temperate ones with high ratios of Acid/aldehyde of vanillyls ((Ad/Al)v) and P/V+S. Contrary to temperate environments, similarly high ratios in tropical soils are not related to TOM degradation along with pedogenesis but to direct influence of plants growing on them. Lignin signatures of both plants and soils of primary rainforest and fallow forest clearly distinguish from those of non-forested areas, i.e., agriculture fields and pastures. Attalea speciosa Palm trees, an invasive species in all perturbed landscapes of the Amazon, exhibit lignin signatures clearly distinct from other dominant plant species. The study of lignin signatures in tropical areas thus represents a powerful tool to evaluate the impact of primary rainforest clearing on TOM dynamics in tropical areas.