• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.331-336
• /
• 2001

This study was to develop a kerosene flame weeder. An air compressor was driven though the PTO of a tractor to provide necessary air for fuel combustion and proper pressure to supply fuel from fuel tank to the nozzle. It was found that the flame was extinguished very easily by wind and vibration of the tractor. This trouble could be solved by attaching a burner cap, which is a modified venturi tube, at the end of the nozzle. The constructed flame weeder was tested for the weeding capability in the prepared field. Weed extinction rate and weight decrease rate were analysed. Measured maximum flame temperature was 1,121$\^{C}$ when the fuel consumption was 13.41 kg/h and fuel supply pressure was 88.2 kPa. The maximum temperature occurred at 20cm from the front end the burner, and it decreased to 46$\^{C}$ as the distance increased to 110cm. The flame length of up to 70cm, where the flame temperature was higher than 372$\^{C}$, would be used for weeding purpose. Weed extinction rate and weight decreasing rate increased as the fuel consumption increased. The flame weeder was evaluated to be a practical weeder through improvement as the weed extinction rate and weight decrease rate were analysed to be 75% and 85%, respectively when the fuel consumption was 116.87kg/ha.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.129-132
• /
• 2000

In this paper, a 1.8㎓ low noise amplifier was designed and simulated using 0.2$\mu\textrm{m}$ Si CMOS process. Noise characteristics and s parameters were extracted for the 300$\mu\textrm{m}$ gate width and 0.25$\mu\textrm{m}$ gate length NMOS transistors. For high available power gain, each stage was designed cascode type. It revealed available power gain of 23.5dB, noise figure of 2.0dB, power consumption of 15㎽ at 2.5V. It was shown that designed low noise amplifier had good RF performance. Designed Si CMOS LNA is expected to be used for RF front-end in transceiver.

• 환경생물
• /
• 제41권1호
• /
• pp.54-59
• /
• 2023

Lovenia elongata is a member of the family Loveniidae and is one of the most common tropical echinoids. This species has a broad distribution range in the sub- and tropical regions of the Indo-Pacific Ocean, extending from the Mozambique to the Hawaiian Islands, and from southern Japan to northern Australia. It is commonly found in subtidal areas and on coral reefs within these regions. This species was for the first time recorded from the Ulleungdo Island, Korea. This species is characterized by a teardrop-shaped test that reaches up to 5 cm in length, with a deep groove at the front and tapered at the back end. The petaloid is not obvious, and the primary spines are long and banded. This study is the first to report the newly recorded L. elongata in Korea.

• 복식
• /
• 제66권4호
• /
• pp.146-165
• /
• 2016

The aim of the study is to propose ways to improve the break line fit of women's tailored collar vests by modifying the patternmaking process. The study explored the fit effects of experimental vests with a focus on 3 different breast sizes, A, B, and C cups. Women in the ages between 20 and 24 in South Korea were targeted. In order to carry out the objective, the study implemented separate girth measurements for the front and the back of the tailored collar vests, and also allocated different dart amounts on the lapel through the break line according to the different breast cup sizes. The study adopted a 5-point rating scale to perform evaluation of the different fit effects caused by the varying dart amounts given on the experimental vests' break lines. This evaluation was carried out by apparel pattern experts. The results derived from the study were as follows: first, the implementation of separate girth measurements provided originality to the study, as the application of different measurements for the waist back length and the neck shoulder point-to-breast point-to-waist line led to the front panels of the experimental vests having varying slack amounts. Second, break line dart was applied in three different amounts, 0.5, 1.0, and 1.5cm respectively according to A, B and C breast sizes, and as the dart amount increased, extra ease on the break lines was reduced. The dart was applied on the edge lines of the lapel and it was applied from a point which was 6cm above the breast point to the end of the princess line for all the breast cup sizes.

• Animal Bioscience
• /
• 제37권4호
• /
• pp.555-566
• /
• 2024

Objective: This study aimed to assess the genetic parameters and accuracy of genomic predictions for twenty-four linear body conformation traits and overall conformation scores in Korean Holstein dairy cows. Methods: A dataset of 2,206 Korean Holsteins was collected, and genotyping was performed using the Illumina Bovine 50K single nucleotide polymorphism (SNP) chip. The traits investigated included body traits (stature, height at front end, chest width, body depth, angularity, body condition score, and locomotion), rump traits (rump angle, rump width, and loin strength), feet and leg traits (rear leg set, rear leg rear view, foot angle, heel depth, and bone quality), udder traits (udder depth, udder texture, udder support, fore udder attachment, front teat placement, front teat length, rear udder height, rear udder width, and rear teat placement), and overall conformation score. Accuracy of genomic predictions was assessed using the single-trait animal model genomic best linear unbiased prediction method implemented in the ASReml-SA v4.2 software. Results: Heritability estimates ranged from 0.10 to 0.50 for body traits, 0.21 to 0.35 for rump traits, 0.13 to 0.29 for feet and leg traits, and 0.05 to 0.46 for udder traits. Rump traits exhibited the highest average heritability (0.29), while feet and leg traits had the lowest estimates (0.21). Accuracy of genomic predictions varied among the twenty-four linear body conformation traits, ranging from 0.26 to 0.49. The heritability and prediction accuracy of genomic estimated breeding value (GEBV) for the overall conformation score were 0.45 and 0.46, respectively. The GEBVs for body conformation traits in Korean Holstein cows had low accuracy, falling below the 50% threshold. Conclusion: The limited response to selection for body conformation traits in Korean Holsteins may be attributed to both the low heritability of these traits and the lower accuracy estimates for GEBVs. Further research is needed to enhance the accuracy of GEBVs and improve the selection response for these traits.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제8권11호
• /
• pp.441-448
• /
• 2019

기존의 자동 띄어쓰기 연구는 n-gram 기반의 통계적인 기법을 이용하거나 형태소 분석기를 이용하여 어절 경계면에 공백을 삽입하는 방법으로 띄어쓰기 오류를 수정한다. 본 논문에서는 심층 신경망을 이용한 종단 간(end-to-end) 한국어 문장 자동 띄어쓰기 시스템을 제안한다. 자동 띄어쓰기 문제를 어절 단위가 아닌 음절 단위 태그 분류 문제로 정의하고 음절 unigram 임베딩과 양방향 LSTM Encoder로 문장 음절간의 양방향 의존 관계 정보를 고정된 길이의 문맥 자질 벡터로 연속적인 벡터 공간에 표현한다. 그리고 새로이 표현한 문맥 자질 벡터를 자동 띄어쓰기 태그(B 또는 I)로 분류한 후 B 태그 앞에 공백을 삽입하는 방법으로 한국어 문장의 자동 띄어쓰기를 수행하였다. 자동 띄어쓰기 태그 분류를 위해 전방향 신경망, 신경망 언어 모델, 그리고 선형 체인 CRF의 세 가지 방법의 분류 망에 따라 세 가지 심층 신경망 모델을 구성하고 종단 간 한국어 자동 띄어쓰기 시스템의 성능을 비교하였다. 세 가지 심층 신경망 모델에서 분류 망으로 선형체인 CRF를 이용한 심층 신경망 모델이 더 우수함을 보였다. 학습 및 테스트 말뭉치로는 최근에 구축된 대용량 한국어 원시 말뭉치로 KCC150을 사용하였다.

• 한국의류학회지
• /
• 제24권6호
• /
• pp.850-860
• /
• 2000

The purposes of this study was to provide the fundamental data for children's wear standardizing sizes of ready-made clothes by analyzing the elementary school girls’somatotype. The subjects for anthropometic measurements were 434 elementary school girls’by age groups < ‘(1st age(1ㆍ2 grade)’,‘2nd age(3ㆍ4 grade)’, and 3rd(5ㆍ6 grade)’ > living in Pusan. According to the analysis of upper bodies by the age groups 1. According to the analysis to draw somatometric factors by the age groups, sevenㆍseven and six actors in 1st . End and 3rd age groups are obtained from measurements of upper body. 2. The 1st & 2nd age groups: As the result of factor analysis for the factor, the first and second factors which explain more than 70% of the whole variance represent“horizontal size”and“vertical size”, which characterize more aspects of the body shape of girls at elementary school ages. 3. The 3rd age groups: As the result of factor analysis for the factor, 6 factor which explain 74.39% of variance were extracted form anthropometic data. The first factor represented the items of circumference, breadth and depth related to“sectional size the front length of the upper body”, The second factor described the items of "heights & the back length of the upper body”.

• 한국축산시설환경학회지
• /
• 제8권3호
• /
• pp.171-176
• /
• 2002

Physical parameters of milk cow were measured to design and build RMS(Robotic Milking System) with a tape-measurer and body parameter measurer. The parameters are very important variables to design an RMS. For the working zone space of an RMS manipulator and the movement blunting of milk cow, an interval frame was installed on the stall bottom, and then cow's behavioral reactions were tested. The results from this study is summarized as follow. 1. On the general physical condition measurement, the maximum, minimum and average body length of cow which is related to the space that the manipulator could work into the RMS were 175cm, 144cm, and 163cm respectively. It appeared that the average distance between bottom and chest was 60cm. 2. The average length between fore teats, fore and hind teats and hind teats were 178mm, 150mm and 95mm respectively. It appeared that the average length between bottom and teat attachments was 544mm, and the average length between fore teats and tail-end was 331mm. 3. Although a cow kept a some extent length between hind legs for milking, it looked a stable pose. However, the cow kept a some extent distance between front legs for milking, it looked a unstable pose. Based on results of this test, an interval frame of stall bottom should be installed around the position which was located at its hind legs.

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2245-2251
• /
• 2013

본 논문에서는 사각형 패치가 종단에 장하된 소형 직렬 급전 다이폴 쌍(series-fed dipole pair; SDP) 안테나를 제안하였다. SDP 안테나의 폭을 줄이기 위해 두 다이폴 소자의 두 팔의 종단과 접지면의 양끝에 사각형 패치가 추가되었다. 사각형 패치의 길이와 폭에 따른 입력 반사계수와 같은 안테나 성능의 변화를 분석하였다. 1.7-2.7 GHz 대역에서 동작하는 최적화된 소형 SDP 안테나를 설계하여 FR4 기판 상에 제작하였다. 제작된 안테나의 폭은 기존의 SDP 안테나와 비교하여 14.3% 줄었다. 제작된 SDP 안테나를 측정한 결과, VSWR이 2 이하인 임피던스 대역폭은 48.7%(1.68-2.76 GHz), 이득은 5.6-6.0 dBi으로 기존 SDP 안테나와 유사하며 전후방비는 0.7-7.4 dB 향상되었다.

• 복식문화연구
• /
• 제6권3호
• /
• pp.56-72
• /
• 1998

Vest is a general term for a sleeveless upper garment and it derives from a kolobus of a sleeveless tunic style that was started to be worn as a substitution of a chiton by the peasantry in Greek period. The kolobus started to be called a colobium or a tunica from Roman period and the former was named for a vest style tunica which was worn by the people of the lower classes in early Roman period. Similarly, a German colobium of North Europe which was worn during the same period was the same kind of clothe as the Roman colobium. The colobium came to be worn over a dalmatica as an outer garment by early Christians when it was the Middle Ages, who succeeded the tradition of colobium as they went through ancient Rome, Creek and Byzantine days. North Germans also succeeded the colobium tradition of ancient Germans as it was and so continued to wear it in tight style. The simple vest style of colobium was getting vanished from the mid of the Middle Agnes and a new style of vest named jupon was started to be worn by soldiers. The jupon was to protect soldiers' bodies from either were cold weather or enemies wearing under armors as it was made with double cotton pad by quilt. From 14th century, the jupon began to be worn by not only soldiers but also the humble of lower classes. All the jupon which were made in quilting and padding of that time began to be named a pourpoint by the humble. When Renaissance in 16th century came, the pourpoint began to be developed to an exaggerating body-line style. The neckline of pourpoint was getting highly influenced by Spain and a peacecod-belly of it emphasized the exaggerated masculine beauty of Renaissance by padding in round. The sleeves were puffed out and the whole purpoint was made to expose an inner chemise by slashing vertically or obliquely. But in 17th century, the pourpoint has been changed into more simple style without padding, puffing out and slashing influenced by the citizens' clothes of Netherlands. The pourpoint came to be more comfortable bulky style with short sleeves or sleeveless and straight side lines. The pourpoint in mid 17th century turned to be a bolero jacket style by gradually being tightened. It had been then changed into a vest style with sleeves and worn under an overcoat with the name of vest in the end of 17th century. The early vest was 2∼3 inches les in length than the overcoat and had long sleeves and many ornamental buttons on front. It was also made as a home wear to be worn it alone at home. In 18th century, the length of the vest became shorter compared with that of 17th century and the most important decorative item in clothes. It again came to have complete sleeveless vest style and had very short length reaching waist in the end of 18th century. When it was in 19th century, the vest had developed into more various style and colors and style had been applied to be worn by individuals with their tastes. Around the end of 19th century, the increasing tendency to be casual by industrialization influenced on clothes in all aspects of life and so the male vest has been gradually changed into more casual style. Nowadays, it has been developing into various uses in modern male clothes to show their characters.