• Wind and Structures
• /
• v.22 no.6
• /
• pp.663-684
• /
• 2016

Conical vortices generated at the corner regions of large-span flat roofs have been investigated by using the Particle Image Velocimetry (PIV) technique. Mean and instantaneous vector fields for velocity, vorticity, and streamlines were measured at three visual planes and for two different flow angles of $15^{\circ}$. The results indicated that conical vortices occur when the wind is not perpendicular to the front edge. The location of the leading edge corresponding to the negative peak vorticity and maximum turbulent kinetic energy was found at the center of the conical vortex. The wind pressure reaches the maximum near the leading edge roof corner, and a triangle of severe suctions zone appears downstream. The mean pressure in uniform flow is greater than that under turbulent flow condition, while a significant increase in the fluctuating wind pressure occurs in turbulent streams. From its emergence to stability, the shape of the vortex cross-section is nearly elliptical, with increasing area. The angle that forms between the vortex axis and the leading edge is much smaller in turbulent streams. The detailed flow structures and characteristics obtained through FLUENT simulation are in agreement with the experimental results. The three dimensional (3-D) structure of the conical vortices is clearly observed from the comprehensive arrangement of several visual planes, and the inner link was established between the vortex evolution process, vortex core position and pressure distribution.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.7
• /
• pp.976-983
• /
• 2000

The flow characteristics around an elliptic cylinder with axis ratio of AR=2 located near a flat plate were investigated experimentally to study the interaction between the cylinder wake and the turbulent boundary layer. The pressure distributions on the cylinder surface and on the flat plate were measured with varying the angle of attack of the cylinder. In addition, the velocity profiles of wake behind the cylinder were measured using a hot-wire anemometry As the angle of attack increases, the location of peak pressure on the windward and leeward surfaces of the cylinder moves toward the rear and front of the cylinder, respectively. At positive angles of attack, the position of the minimum pressure on the flat plate surface is moved downstream, but it is moved upstream at negative angles of attack. With increasing the angle of attack, the vortex shedding frequency is gradually decreased and the critical angle of attack exists in terms of the gap ratio. By installing the elliptic cylinder at negative angle of attack, the turbulent boundary layer over the flat plate is disturbed more than that at positive incidence. This may be attributed to the shift of separation point on the lower surface of the cylinder due to the presence of a ground plate nearby.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.6
• /
• pp.413-420
• /
• 2008

The unsteady heat release characteristics play a significant role in combustion instabilities observed in low emissions gas turbine combustors. Such combustion instabilities are often caused by coupling mechanisms between unsteady heat release rates and acoustic perturbations. A generalized model of the turbulent flame response to acoustic perturbations is analytically formulated by considering a distributed heat release along a curved mean flame front and using the flame's kinematic model that incorporates the turbulent flame development. The effects of the development of flame speed on the flame transfer functions are examined by calculating the transfer functions with a constant or developing flame speed. The flame transfer function due to velocity fluctuation shows that, when a developing flame speed is used, the transfer function magnitude decreases faster with Strouhal number than the results with a constant flame speed at low Strouhal numbers. The flame transfer function due to mixture ratio fluctuation, however, exhibits the opposite results: the transfer function magnitude with a developing flame speed increases faster than that with a constant flame speed at low Strouhal numbers. Oscillatory behaviors of both transfer function magnitudes are shown to be damped when a developing flame speed is used. Both transfer functions also show similar behaviors in the phase characteristics: The phases of both transfer functions with a developing flame speed increase more rapidly than those with a constant flame speed.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.132-145
• /
• 1992

A series of design, theoretical analysis and model test procedures is presented for the development of an axisymmetric stator-propeller system. A preswirl stator is located in front of a propeller in order to improve the propulsion efficiency by cancellation of the slip stream rotational velocity due to the propeller. Model test results show that propulsion efficiency gain due to the symmetric stator-propeller system is about 3% compared to the single propeller. This efficiency gain would increase for full scale application since the pressure drag coefficient of the stator would decrease due to increasement of turbulent intensity behind the hull wake and increasement of Reynolds number.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.102-109
• /
• 2006

The effects of wind fence on the pressure characteristics around low-rise building model were investigated experimentally. Flow characteristics of turbulences behind wind fence were measured using hot-wire anemometer. The wind fence characterize by varying the porosity of 0 %, 40 % and the distances from the wind fence from 1 H to 6 H with maintaining the uniform flow velocity of 6 m/s. We investigated the overall characterization of the low-rise building by measuring pressure seventy four on model. The effects of porosity fences varied with the porosity of the fence and measurement locations(1H-6H). The 0% porosity proved to be effective for the protection area of 4H to 6H, but the 40% porosity proved to be effective for the protection area of 1H to 6H. The low-rise building of front face was found to be best wind fence for decreasing the mean, maximum and minimum pressure fluctuation.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.57-58
• /
• 2015

In this study, we present geometrical and kinematical analysis of Moreton wave observed in 2012 June 3rd and July 6th, recorded in H-${\alpha}$ images of Global Oscillation Network Group (GONG) archive. These large-scale waves exhibit different features compared to each other. The observed wave of June 3rd has angular span of about $70^{\circ}$ with a diffuse wave front associated to NOAA active region 11496. It was found that the propagating speed of the wave at 17:53 UT is about $931{\pm}80km/s$. The broadness nature of this Moreton wave can be interpreted as the vertical extension of the wave over the chromosphere. On the other hand, the wave of July 6th associated with X1.1 class are that occurred at 23:01 UT in AR NOAA11515. From the kinematical analysis, the wave propagated with the initial velocity of about $994{\pm}70km/s$ which is in agreement with the speed of coronal shock derived from type II radio burst, v ~ 1100 km/s. These two identified waves add the inventory of the large-scale waves observed in 24th Solar Cycle.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.70-77
• /
• 2012

Experimental investigations were performed to examine the characteristics of propagating flame fronts around multiple bars within a rectangular chamber. The explosion chamber is 400 mm in height, $700{\times}700mm^2$ in cross-section and has a large top-venting area, $A_v$, of $700{\times}210mm^2$. This results in a value of 0.44 for $A_v/V^{2/3}$ and a L/D value of 0.57. The multiple obstacles of length 700 mm with a blockage ratio of 30 % were placed within the chamber. Temporally resolved flame front images were recorded by a high speed video camera to investigate the interaction between the propagating flame and the obstacles. Results showed that the flame propagation speeds before the flame impinges onto the obstacle almost equal to the laminar burning velocity. As the propagating flame impinged on the obstacle, the central region of flame began to become concave, this resulted in the flame deceleration in the region. As the flame interacted with the modified flow filed generated behind the central obstacle, the probability density functions(PDFs) of the local flame displacement speed were extensively distributed toward higher speeds.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.788-793
• /
• 2017

This military aircraft requires the compatibility evaluation of armed installations in accordance with guidelines and standards. In order to ensure the influence of gas-air mixtures caused by gunfire of the supersonic aircraft, CFD analysis of internal and external flows was performed and the results carried out and discussed. The low velocity vortex was formed due to the shape of the Gun Port, after firing the gas-air mixture was evacuated to the outside flow, where it moved to the front of the aircraft and soon merged with the aircraft flow field.

• Journal of the Korean Society of Combustion
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2001

To evaluate the effect of lobed structure on pollutant emission, an experimental study examines NOx and CO emissions associated with four burner geometries, such as a conventional circular burner and three lobed ones. Rapid mixing allowed by the lobed burner to produce lean premixed flames, with narrower flame stability diagram than for the conventional circular one. Conventional circular burner of wide and uniform burner rim has an advantage of flame stabilization. Correlation on fuel discharge velocity for flame blowout should be included a variable related to the wall effect of the burner. NOx emission reduces by about 5% at the burner with lobed structure in fuel discharge side compared to conventional circular one. This is due to lower flame temperatures through flame elongation and increased radiative heat losses, caused by partially luminous flame in flame front. Meanwhile, at the burner with lobed structure in air discharge side and both fuel and air discharge sides, NOx emission somewhat increases with reduced radiative heat losses in spite of flame elongation. Therefore, the rapid mixing by lobed structure does not always have an advantage on NOx reduction.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.405-413
• /
• 2013

During the land operations, the enemy's gunnery is the primary threat. For the military vehicle, the bulletproof effect is the one of the important issues regarding the safety of soldiers on duty. Recently, the advanced military vehicles have planned to install armor plates. However, due to the budget problem, it is difficult to equip the protection systems. Hence, the optimum approach to increase bulletproof capability is essential. In this paper, the optimum thickness and component of the armor of military vehicles were evaluated by using finite element analysis for bullet impact effects. To achieve this aim, 7.62mm NATO bullet, 1.6mm steel and Kevlar-29 composite have been modeled and the simulations were conducted with various thickness cases by using MSC Nastran sol 700. Consequently, it was revealed that Kevlar-29 45 Layer is appropriate thickness for 7.62 bulletproof. Furthermore, Kevlar-29 in front of steel was effective by comparison with the back of steel for bulletproof.