• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• Journal of the Korean Society of Costume
• /
• v.64 no.8
• /
• pp.55-66
• /
• 2014

Baeja(背子), which was excavated from the tomb of Sim, Su-ryun(沈秀崙, 1534-1589), a civil official, has a distinctive pattern. Two rectangles are connected by button knots on both shoulders and below the armpits, and surround the front and back of the upper body. Also, the back is shorter than the front, while the center-front is not opened. It also has a round neckline without a collar. Jeojuji(楮注紙), which is a traditional Korean paper made from mulberry bark, is put between the outer shell and lining of this clothing as an interlining. The purpose of this study is to perform a morphological feature analysis of the Baeja to examine its characteristics and name, and clothes with similar features, attire relic, pictorial and ceramic materials as well as precedent studies were used in the analysis. The Baeja, which was excavated from the tomb of Sim, Su-ryun, has the same pattern as Yangdang(裲檔), which was worn in the ancient northern region and China. Its composition and the way it was worn are very simple. Also, the shorter back length can be used as evidence that it was worn as everyday outer clothing, and not in a ceremony. Jeojuji, used as an interlining, made it easy to sew and maintain attire pattern and played a role of maintaining warmth. Therefore, this Baeja is presumed to be an outer clothing simply worn in the everyday life for convenience and warmth. In regards to its morphological feature, it was most likely a Yangdang in Joseon Dynasty.

• MALSORI
• /
• no.59
• /
• pp.1-11
• /
• 2006

This study was designed to investigate the relationship between intelligibility and phonemic contrasts, and acoustic features in terms of speech development. A total of 212 Putonghua speaking children was participated in the experiment. There were phonemic contrasts significantly related with speech intelligibility: aspirated vs. fricative, retroflex vs. unretroflex, and front vs. back nasal vowel contrast. A regression analysis showed that 88% of the speech intelligibility could be predicted by these phonemic contrasts. Acoustic values were significantly related to the intelligibility of the Putonghua-speaking children's speech: voice onset time of unaspirated stops, and the duration of frication noise in fricatives.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.831-845
• /
• 1997

In this paper,we proposed and developed a compiler and interactive programming enviroments for C++ wich is mostly worth of nitice among the object -oriented languages.To develope the compiler for C++ we took front=end/back-end model using EM virtual machine.In develpoing Front-End,we formailized C++ gram-mar with the context semsitive tokens which must be manipulated by dexical scanner and designed a AST class li-brary which is the hierarchy of AST node class and well defined interface among them,In develpoing Bacik-End,we proposed model for three major components :code oprtimizer,code generator and run-time enviroments.We emphasized the retargatable back-end which can be systrmatically reconfigured to genrate code for a variety of distinct target computers.We also developed terr pattern matching algorithm and implemented target code gen-erator which produce SPARC code.We also proposed the theroy and model for construction interative pro-gramming enviroments. To represent language features we adopt AST as internal reprsentation and propose uncremental analysis algorithm and viseal digrams.We also studied unparsing scheme, visual diagram,graphical user interface to generate interactive environments automatically Results of our resarch will be very useful for developing a complier and programming environments, and also can be used in compilers for parallel and distributed enviroments.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.198-208
• /
• 2014

The purpose of this study was to investigate the demand for functional elements of sports climbing shirts. Questionnaire survey data were collected from adult (n=53) and adolescent (n=55) sports climbers. The questionnaire explored respondents' sports climbing activities and need for functional design features of sports climbing shirts. Their design preferences and purchasing value were also investigated. The results showed that respondents regarded ergonomic design and the use of intelligent material as important elements of expert-level sports climbing shirts. Compared to adolescent, adult respondents were more susceptive to functional design elements such as suitability for climbing motions and ease of dressing or undressing. Also, adult sports climbers were more likely than adolescents to prefer shirts that are tightly fit at the chest. Neither adults nor adolescents favored shirts design that is tightly fit at the neck or armpit. The regular shirts length not covering hips and sleeve length ending at the wrist were preferred. The collar stand should not hit the chin. Adult climbers preferred ergonomically designed sleeves on the back shoulder. Adults and adolescents had different preferences for the front neck zipper length. Adults preferred long front zipper length at chest. These findings suggest that sports climbing shirts should have functional features to prevent interference with climbing movements and improve convenience and stability.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.103-120
• /
• 2012

The study aimed to evaluate the appearance of the men's work clothes jumpers developed to suggest the prototype work clothes jumper patterns by using the 3-D clothing simulation technology. The 3-D simulated clothing images considered the upper body features of men in the age range between 20 and 59 in South Korea. A questionnaire survey conducted previously suggested a basic jumper style with shirt collar and snap opening cuffs for the heavy industry workers; and discomforting parts of the work clothes jumper of the subject workers have been referred to for the experimental jumper appearance test. Besides, defining the measurements of men's upper bodies enabled to generate the men's 3-D virtual models representing each age group's average body feature. The significant body measurement factors for men's 3-D body modeling and jumper pattern-making were stature for the height factor; chest, waist and hip circumferences for the circumference factor; waist back, hip and arm lengths and interscye front/back for the length factor; and back neck breadth for the breadth factor and armscye and scye depths for the depth factor. The men's body measurements of 30's were implemented to three experimental jumper pattern-making methods, i.e. the 1st method using the relations based on stature and chest circumference; the 2nd method using the direct body measurements; and the 3rd method adopting the maximum ease amount of given body measurements whether relations or direct measurements except the direct measurement of scye depth. A comparison among the three experimental jumpers' simulated images highlighted that the appropriate ease amount of the jumper gained higher scores in terms of the jumpers' front, side, back and sleeve parts and the total silhouettes. Therefore the 3rd experimental jumper was finally selected for the heavy industry workers.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1230-1242
• /
• 1993

In a case of mushroom (Lentinus Edodes L.) , visual features are crucial for grading and the quantitative evaluation of the growth state. The extracted quantitative visual features can be used as a performance index for the drying process control or used for the automatic sorting and grading task. First, primary external features of the front and back sides of mushroom were analyzed. And computer vision based algorithm were developed for the extraction and measurement of those features. An automatic thresholding algorithm , which is the combined type of the window extension and maximum depth finding was developed. Freeman's chain coding was modified by gradually expanding the mask size from 3X3 to 9X9 to preserve the boundary connectivity. According to the side of mushroom determined from the automatic recognition algorithm size thickness, overall shape, and skin texture such as pattern, color (lightness) ,membrane state, and crack were quantified and measured. A portion of t e stalk was also identified and automatically removed , while reconstructing a new boundary using the Overhauser curve formulation . Algorithms applied and developed were coded using MS_C language Ver, 6.0, PC VISION Plus library functions, and VGA graphic function as a menu driven way.

• Phonetics and Speech Sciences
• /
• v.1 no.4
• /
• pp.29-38
• /
• 2009

This study investigated the interaction between consonants and vowels in Korean syllable perception using a speeded classification task (Garner, 1978). Experiment 1 examined whether listeners analytically perceive the component phonemes in CV monosyllables when classification is based on the component phonemes (a consonant or a vowel) and observed a significant redundancy gain and a Garner interference effect. These results imply that the perception of the component phonemes in a CV syllable is not linear. Experiment 2 examined the further relation between consonants and vowels at a subphonemic level comparing classification times based on glottal features (aspiration and lax), on place of articulation features (labial and coronal), and on vowel features (front and back). Across all feature classifications, there were significant but asymmetric interference effects. Glottal feature.based classification showed the least amount of interference effect, while vowel feature.based classification showed moderate interference, and place of articulation feature-based classification showed the most interference. These results show that glottal features are more independent to vowels, but place features are more dependent to vowels in syllable perception. To examine the three-way interaction among glottal, place of articulation, and vowel features, Experiment 3 featured a modified Garner task. The outcome of this experiment indicated that glottal consonant features are independent to both the place of articulation and vowel features, but the place of articulation features are dependent to glottal and vowel features. These results were interpreted to show that speech perception is not abstract and discrete, but nonlinear, and that the perception of features corresponds to the hierarchical organization of articulatory features which is suggested in nonlinear phonology (Clements, 1991; Browman and Goldstein, 1989).

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.159-179
• /
• 1993

The purpose of this study is to collect data for he improvement of the accuracy of upper garments construction of the old whose bodies have been changed due to their age. In this study the body measurements with 61 items were taken from 226 men(aged fro m 60 to 80) living in Seoul by the R. Martin's method in 1992. The data were calculate by computer and analyzed by the multivariate method, especially factor and cluster analysis. The results of the study were as follows; 1. The average stature of elderly males was 163.6cm, chest circumference 91.6cm, waist circumference 9\\85.5cm. hip circumference 92.8cm, neck circumference 37cm, arm length 55.4 cm, back length 42.6cm, shoulder breadth 42.9cm and the Roher's Index 1.39, which was a standard body shape. 2. The items of factor analysis were explained to seven, namely, the degree of fatness of the upper body, the size of the frame of body, the length of the upper body, the degree of curve of the front body, the size of shoulder, the shape of the back, and the slope of shoulder. 3. The body types of subjects were classified into four types. The majority was type 4, which was 67% of subjects and considered as balanced body type. The distinctive features of those types are as follows; Type 1. The subjects of this type had a slight skeletal structure and were the thinnest of all the subjects with thin and forward-bent arm. Type 2. The subjects of this type were the tallest of all the subjects. they had the straightest side of body and a well-developed upper arm. The thigh length of this type was longer than the length of trunk. Type. 3. The subjects of this type was only one, so ti could be excluded. Type 4. The subjects of this type had a long trunk, well-developed shoulder, and a crook in their neck and back. The arm length and thigh of this type were short and those circumferences were thick. Type 5. The subjects of this type were the shortest of all, but had the highest degree of fatness in the waist and abdominal. They had well-developed front muscles of body and projected hip.

• The Research Journal of the Costume Culture
• /
• v.9 no.5
• /
• pp.770-782
• /
• 2001

The definite objects of this study are as follows; 1. The study presents the methods of the designing collar pattern and bodice pattern by each concrete object after comparing and analyzing the factors among the features which are in need of clothes designing. 2. The object of this study is to make body-suitable ready-made clothes by comparing and analyzing the methods of designing collar pattern and bodices pattern presented by each concrete objects and Bunka Pattern. The results of this study are as follows; 1 . The results of this study developed the body-suitable bodice pattern of bend-forward type, straight type and lean-back type Compared with the Bunka pattern by physical function test, this study was rated high in the aspects of the shape of neck and shoulder. 2. The collar pattern was designed according to each type. The front center rising point of straight type is 2.5cm, lean-back type is 3.0cm and bend-forward type is 1.5cm. Compared with the Bunka pattern by physical function test, this study is rated high in the aspects of the shape. To confirm the increase and change of the measure definitely, the complete examination of each subject is necessary. This developed and investigated pattern must be supplemented more by comparing and analyzing with other pattern and body types.