• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.7
• /
• pp.418-423
• /
• 2000

The fiber Fabry-Perot interferometric(FFPI) sensor is well known in the field of industrial diagnosis due to its outstanding properties such as tiny size, simple and rugged structure, and easy interrogation. As other fiber interferometric sensors, it also suffers from ambiguous output caused by highly periodic feature in its optical transfer function. In most cases, the ambiguity leads to relatively short dynamic operating range and long processing time during power-on reset, which limits its application to some specific fields requiring very high resolution. In this paper a method based on double sensing scheme was proposed to overcome the above difficulty. By employing a fringe selection auxiliary FFPI sensor the original FFPI sensor can identify its true position on the phase domain. The performance test with 10mm FFPI sensor and a thermocouple temperature sensor for reference shows wide dynamic range 0-900$\ell$ keeping a reasonable resolution of 0.1$\ell$ over the entire range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.451-451
• /
• 2011

적외선 소자의 재료로 쓰이는 액상 에피 성장법(Liquid phase epitaxy: LPE)으로 성장된 HgCdTe (MCT)박막의 Hg 분위기 열처리에 따른 구조적 변화를 고 분해능 투과 전자 현미경으로 관찰하였다. 일반적으로 LPE방법으로 성장된 MCT박막은 성장 방법의 특성상 Te 과다 영역의 성장용액이 사용되므로 상온 냉각 과정에서 박막 내 국부적인 Te 석출물을 형성 시킬 가능성이 높다. 또한, 성장 과정시 높은 Hg 증기압으로 인해 Hg-vacancy가 존재하므로 품질을 저하시키는 요인이 된다. 따라서, 본 실험에서는 Hg-vacancy와 국부적인 Te 석출물의 제거를 위해 Hg 분위기 열처리 공정을 실시하여 박막의 결정성 변화 및 국부적인 조성 변화를 관찰하였다. 실험결과, 열처리에 따른 Hg의 박막 내 공급으로 인한 이차상의 형성 등이 관찰 되었으며 부피 팽창으로 인해 격자의 변형이 관찰 되었다. 이는 투과 전자 현미경의 고 분해능 이미지 와 Gaussian mask filtering 기법으로 보여진 격자 줄무늬상 (lattice fringe)으로 확인 하였다. 또한, 열처리에 따른 국부적인 조성 편기의 해소는 high angle annular dark field scanning TEM(HAADF-STEM)을 이용하여 관찰 하였다.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.295-307
• /
• 2017

An innovative system for the alternative continuous wide spectral spatial heterodyne spectrometer (ACWS-SHS) is proposed. The relationship between the ACWS-SHS and the wide spectral spatial heterodyne spectrometer (WS-SHS) at the resolution limit, the spectral range, the grating diffraction efficiency and the interference fringes contrast ratio has been analyzed theoretically. Through the comparison of the theoretical analysis and simulation results, it is found that the two systems for the WS-SHS and the ACWS-SHS have the same resolution limit and spectral range, which are ${\delta}{\sigma}$ and ${\sigma}_{01}$, while in the ACWS-SHS system the critical diffraction efficiency of echelle grating is 68.39% and the critical contrast ratio of interference fringes is 0.4135, which is much better than the performance of the WS-SHS system. Therefore, the ACWS-SHS reduces the high requirements for the precision of equipment and expands the application field of SHS effectively.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.784-793
• /
• 2016

We present a single shot low coherence white light Hilbert phase microscopy (WL-HPM) for quantitative phase imaging of Si optoelectronic devices, i.e., Si integrated circuits (Si-ICs) and Si solar cells. White light interferograms were recorded by a color CCD camera and the interferogram is decomposed into the three colors red, green and blue. Spatial carrier frequency of the WL interferogram was increased sufficiently by means of introducing a tilt in the interferometer. Hilbert transform fringe analysis was used to reconstruct the phase map for red, green and blue colors from the single interferogram. 3D step height map of Si-ICs and Si solar cells was reconstructed at multiple wavelengths from a single interferogram. Experimental results were compared with Atomic Force Microscopy and they were found to be close to each other. The present technique is non-contact, full-field and fast for the determination of surface roughness variation and morphological features of the objects at multiple wavelengths.

• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.398-402
• /
• 2010

The liquid phase epitaxy(LPE) method was widely used to growth of mercury cadmium telluride(MCT) thin films. However, this method lead to Hg-vacancies in MCT thin film, because Hg has high vapor pressure at this temperature range. This is a well known defect in HgCdTe grown by LPE method. In this study, we report the development of techniques for improving the crystalline quality and controlling the composite uniformity of HgCdTe thin films using high- pressure Hg-ambient annealing method. As a result, we achieved the improvement of the composite uniformity of HgCdTe thin films. It was observed by the high angle annular dark field scanning TEM(HAADF-STEM) analysis. Moreover, new HgTe phase and a shrinking of lattice fringe were observed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.223-226
• /
• 2013

In this study, we investigated the electro-optical(EO) characteristic of fringe-field switching(FFS) mode cell by the two kinds of ultraviolet(UV) alignment method on the organic thin film(polyimide: PI). The suitable organic layersfor FFS cell and the aligning capabilities of nematic liquid crystal(NLC) using the in-situ photoalignment method were studied Disclination is observed after conventional photoalignment method for 1h, and in-situ photoalignment method for 1h. Monodomain alignment of the NLC can be observed via in-situ photoalignment method for 2h and 3h. It is considered that NLC alignment is due to photo-depolymerization of the polymer with oblique non-polarized UV irradiation on PI surface. An unstable V-T curve of UV-aligned FFS-LCD with conventional photoalignment method can be achieved. However, a stable V-T curve of UV-aligned FFS-LCD with in-situ photoalignment method(1h), and V-T curve of UV-aligned FFS-LCD with in-situphotoalignment method was much stable comparing with that of other UV-aligned FFS-LCD's. As a result, more stable EO performanceof UV-aligned FFS-LCD with in-situphotoalignment method for 3h is obtained than that of the other UV-aligned FFS-LCD's.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.100-103
• /
• 2005

Homogeneously aligned nematic liquid crystal modes are representatively the -FFS (fringe-field switching) mode using liquid crystal (-LC) with negative dielectric anisotropy, the +FFS mode and the IPS (in-plane switching) mode using +LC with positive dielectric anisotropy. In view of image quality evaluation standard of LCD, we compared characteristics of the brightness, the contrast ratio (CR) and color shift when the modes have respectively optimized phase retardation values $(d{\Delta}n)$. Consequently, in the most sensitively viewing angle of a man's physical vision, both FFS modes have advantage over the IPS mode from the brightness & the CR point of view. We are also confirmed that the +FFS mode out of them shows the smallest color shift according to all viewing directions in grey levels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.518-521
• /
• 2004

We have investigated about compensation film to reduce the light leakage at an oblique angle in-plane switching mode. It is well known that uncompensated in-plane switching (US) and fringe field switching (FFS) liquid crystal displays (LCDs) have much better viewing angle than other modes owing to the in-plane rotation of the LC director. However, to accomplish optimal viewing angle characteristics in these devices, they must be compensated by one or more films. So, in this paper, we have studied how to reduce the light leakage with viewing angle using discotic film in dark state.

• Information Display
• /
• v.21 no.6
• /
• pp.46-56
• /
• 2020

액정 모드 기술은 TFT-LCD의 화질, 공정, 비용을 결정짓는 핵심 기술로 당시 일본에 의해 새로운 개념의 광시야각 액정 모드들이 먼저 개발되었지만 한국의 엔지어들의 노력으로 순수 우리 기술을 개발해 상품화한 것은 돌이켜보면 대단한 일이었다고 본다. 당시 후발 주자인 국내 업계와 학연은 일본의 기술을 배우고 따라잡기 위해 일본어 공부를 하면서 일본어로 된 전문서적을 읽고 학회에서 일본 연구자들에 자존심을 버리고 끊임없는 질문으로 기술을 배웠다. 이러한 상황에서도 삼성의 연구자들은 당시 MTA보다 한 단계 향상된 PVA 모드를 개발해 세계 최초의 30인치 TV에 적용시켜 상용화했을 뿐만 아니라 엘지디스플레이의 연구자들은 IPS 기술을 발전시켜 대형 IPS TV의 세계시장을 주도하였다. 당시 제일 후발주자였던 하이디스 엔지니어들은 FFS란 액정 모드를 개발해 현재 일본 뿐만 아니라 세계의 모든 TFT-LCD 업체가 이 기술을 이용하여 제품을 양산하고 있고 향후에도 미니 LED 기술과 접목하여 고화질 LCD 기술을 주도할 것으로 보인다. 이러한 기술 개발로 액정 기술 분야에서 한국 연구자들이 세계적으로 인정받고 있다고 감히 말할 수 있다. 현재 신개념의 디스플레이 분야에서도 한국이 리드를 하고 있다고 보는데 많은 후배 연구자들이 디스플레이 역사의 한 페이지를 장식할 혁신 기술을 개발하고 있는 것을 응원한다. 마지막으로 필자의 경험을 바탕으로 평가한 각 기술들에 대해 다른 전문가들과 이견이 있을 수도 있음을 명시하며, IPS와 PVA 기술을 직접 개발하지 않은 관계로 더 많은 내용을 세밀하게 기술하지 못한 점 송구하게 생각한다. 위 액정 기술들을 우리나라 디스플레이 기술 20선에 선정해 주신 "한국 디스플레이 기술 20선 선정위원회"에 감사드립니다.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.1 s.18
• /
• pp.65-75
• /
• 2003

As a pre-step research to make land-use planning in the region level, this study aims to analyze some probability pattern representing transition probabilities from farmland to others using the sequential detailed digital land-use maps. Kinki and Chubu regions of Japan, which have Osaka and Nagoya cities as their center places respectively, were selected as test regions in this study. The 10m grid land-use maps for four time series at every 5 year from 1977 to 1992 were used. In this study, the regions were divided into three sub-areas 10km, 20km, and 30km according to distance from center cities, respectively. The correlation coefficient (CC) between sub-areas with same distance in the two regions was calculated to analyze whether or not the two regions have common points in the pattern of land-use conversion probability from farmland to other types. The probability distribution of the converted areas which were moved to the urbanized area (residential, commercial, industrial, road, park and public facility areas) was about $40{\sim}70%$ for both all periods and sub-areas. According to distance from city centers, the probability moved to the urbanized area was about 60% at 10km area, and 40% at the 30km area, which means that the values we decreased gradually, while in the case moved to the forest and the etc areas, the values were increased slightly. The CC analysis from the paddy field and the dry field to the others separately showed that there is high correlation in the probability pattern between the two regions.