• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2072-2081
• /
• 1992

Theoretical fringe patterns were calculated and regenerated by using power series type Williams equations and coefficients estimated from the photoelastic data. Results of calculated values were evaluated by comparing experimental data points with the regenerated theoretical fringe loops. Statistical accuracy evaluation between regenerated fringe values and experimental ones showed that standard deviation was minimum and correlation coefficient was maximum when the first four terms of Wiliams equations were used.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.103-110
• /
• 2000

Shaft encoder which encodes the rotational angle of a shaft becomes more important recently due to factory automation and office automation. Although an absolute type encoder is more dsirable due to its convenience an incremental encoder is commonly used because of its cost and technical difficulties Fabricating a high resolution absolute encoder is very diff-cult because the physical size is limited by currently available technology. In order to overcome this difficulty Moire fringe can be used incorporated with gray code. In order to measure the position of fringes which move as the code disk rotates a neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software which needs a little long calculation time. However using nerual network method can eliminate such calculation time even though it needs learning job The pro-posed method is verified through several experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2723-2729
• /
• 1993

Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.

• Journal of Internet of Things and Convergence
• /
• v.2 no.1
• /
• pp.23-27
• /
• 2016

There is Generated Moire fringe by fresnel diffraction that explains one of light's physical phenomenon and interference. In this paper, we propose to generate true random numbers by Moire fringe should be used by not pseudo-random number in cryptosystem.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.103-113
• /
• 1999

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by the image processing method for the monochromatic incident light. Interference between the reflected lights both on Cr coating of glass disk and on super finished ball makes circular fringes, which are regarded as film thickness together with numbering of fringe order. In this study, we developed technology to measure the film thickness by analyzing dark and bright intensity waves which results from monochrome green light. Two typical fringe patterns only with intensity values 3re examined for the measurement of point contact EHL film thickness. We expect that this technology will give valuable clue to improve color image processing analysis for high resolution of EHL film thickness with white incident light.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.49-50
• /
• 2006

Photoelasticity is widely and conveniently used methods for whole field stress analysis. In this paper, 8-step photoelastic phase shifting method was performed by using a multi-purpose polariscope to measure the fringe orders along a specified line on the specimen containing a square hole. The material of the specimen is made of Polycarbonate. The measurement results by 8-step phase shifting method were compared with the those calculated by ABAQUS.

• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.177-182
• /
• 2012

It is widely recognised that changes in size and isolation of habitat patches have a negative impact on species richness and the distribution and persistence of populations. Thus, the aim of the research was to analyze the change, distribution and spatial characteristics of woodlands in an urban fringe landscape. The results indicated that there was a common trend of woodland loss across all landscape types while no new woodlands were established during 1976 and 2009. Small patches (less than 5 ha in size) were particularly vulnerable to and more likely to disappear due to human activities such as urbanisation. Changes in woodland cover were clearly observed between 1976 and 2009. Loss of many woodlands was caused by residential and infrastructural developments. As a result, woodlands were becoming smaller and more isolated. This trend probably had adverse effects on biodiversity. This woodland information can be used to identify the potential and specific needs for conservation planning in rapidly developing urban areas.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.560-563
• /
• 2007

The light efficiency of fringe-field switching (FFS) mode was found to be dependent on the magnitude of dielectric anisotropy, indicating that the voltagedependent maximal effective cell retardation value in the on state is a function of magnitude of the dielectric anisotropy of the LC.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.556-559
• /
• 2007

Effects of carbon nanotube (CNT) on the in-plain switching (IPS) and fringe-field switching (FFS) modes were investigated. The studies show that the CNT-doped LC cells exhibit lower transmittance but faster response time than those in the pure LC cell. Interestingly, the CNT-doped IPS and FFS modes show different characteristic in effects of operating voltage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.224-230
• /
• 2003

The voltage-dependent transmittance curve of a homogeneously aligned liquid crystal (LC) cell driven by fringe-electric field(named FFS mode) was studied, while changing dielectric anisotropy of a LC. The results show that for a LC with positive dielectric anisotropy while positioning at initial position. Therefore, we conclude that the dynamic stability is strongly dependent on the types of the LCs and voltage-dependent dynamics of the LC with negative dielectric anisotropy is staler than that of the LC with positive dielectric anisotropy in the FFS mode.