• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.114-114
• /
• 2001

The thermal and friction characteristics of phenolic resin and model friction materials were investigated with the content of acrylonitrilebutadienerubber(NBR). The thermal characteristics of material was performed by dynamic mechanical thermal analysis and differential scanning calorimetry. The friction and wear characteristics of the material were determined by using friction material testing machine. The results show that with the more content of rubber, the loss modulus of friction material was increased. The friction coefficient and the specific wear rate with various NBR contents were reported.

• 대한기계학회논문집
• /
• 제3권4호
• /
• pp.151-157
• /
• 1979

An experomental study on drg reduction in the rough tubes is presunted using the drrective drag reducing proymer solutions. The friction factors of the rough tubes follow the maximum drag reduction asymptote for the lower Reynolds numbers in the turbulent flow. However, as the Reynols number is increased the rougher tube results deviate from the maximum drag rduction asymptote sooner than the less rough tube results. There appears a systematic deviation from the maximum drag reduction asymptote depending on the relative roughness just as friction factors for the Newtonian hluid inthe rough tubes exhibit in the turbulent region. The minor loss results inthe various fittings such as elbows, tees, and gate valves are presunted The fittings show higher values of the loss coefficient in the drag reducing polymer solutions than in the Newtonian fluid, which is quite contrary to the drag reduction phenomenon in the straight tubes. The eqivalent length of the fittings for the drag reducing polymer solutions is many times longer than that for Newtonian fluids due to the increase of the loss coefficient and the decrease of the friction factor. It is speculated that the solid-like behavior of the polymer solutions in the abruptly changing folw passage plays a significant role in increasing the loss coefficient.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.136-148
• /
• 1997

The present study has been carried out to develop a computational procedure for the analysis of the off-design performance in centrifugal compressors with vaneless diffusers by integrating empirical loss models and analytical equations. Losses in centrifugal compressors stem from a number of sources and their exact calculation is not yet possible. This study investigates several modeling schemes and shows that a fairly good prediction can be achieved by a proper selection of the most important flow parameters resulting form a meanline one-dimensional analysis. The performance maps for compressors are calculated and compared with measured performance maps. The off-design performance characteristics in terms of the pressure ratio vs. mass flow produced have generally correct forms. However, no universal means have been found to predict accurately the onset of surge. The prediction method developed through this study can serve as a tool to ensure good matching between parts and it can assist the understanding of the operational characteristics of general purpose centrifugal compressors.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.121-125
• /
• 2012

This paper presents the friction and anti-wear characteristics of nano-oil with a mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the thrust bearing experimental apparatus for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and rotating speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing rotating speed and normal force. The friction coefficient of carbon nano-oil is 0.023, while that of pure oil is 0.03 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oil enhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.

• 한국가스학회지
• /
• 제10권2호
• /
• pp.27-32
• /
• 2006

본 논문은 다수의 볼과 접촉하는 두개의 실린더 사이에서 발생하는 접촉응력과 마찰력을 유한요소법으로 해석하였다. LPG 충전기는 구름마찰 운동을 위해 다수의 볼이 평행한 두개의 실린더와 경사진 두개의 실린더 레이스에서 구름마찰 운동을 한다. FEM 해석결과에 의하면, SiC 볼과 SUS 304 볼은 주어진 수직하중, 즉 압축력에 대하여 높은 접촉응력과 마찰력 손실을 보여주고 있다. 반면에 PEEK 볼을 두개의 실린더에 대하여 구름마찰 운동을 유지하면, 대단히 낮은 접촉응력과 마찰력 손실을 나타내는 것으로 보아 폴리머 소재의 사용은 저마찰 접촉특성을 잘 구현하고 있다할 수 있다. 여기에 두개의 실린더가 평행하게 구름마찰 접촉운동을 하느냐, 또는 경사진 상태에서 구름마찰 운동을 하느냐에 따라 접촉거동 특성이 크게 달라지므로 특히 두개 실린더 사이의 상대적 경사도는 극도로 억제되어야 우수한 설계가 된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1219-1224
• /
• 2006

This paper presents the friction and anti-wear characteristics of nano-oil with n mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear Lising nano-oil is evaluated using the thrust bearing tester for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and orbiting speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing orbiting speed and normal force. The friction coefficient of carbon nano-oil is 0.015, while that of pure oil is 0.023 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oilenhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.14-21
• /
• 2017

본 최근 지구의 온난화로 인하여 극한 홍수가 자주 발생하고 있으며, 기존 도시 유역의 우수배제시설 용량부족 등으로 도시홍수가 빈번하게 발생하고 있으므로, 주요 범람지역의 홍수량을 우회하거나 저류하여 홍수를 방지하기 위한 수로터널의 개발이 요구된다. 본 연구에서는 교통기능과 수로기능을 동시에 갖춘 다기능 수로 터널의 설계 기준을 개발하기 위한 수리 실험 및 Flow3D를 이용한 수치모의을 수행하였다. 수치모의결과 동일한 수로 터널 구간 내 발생하는 마찰손실의 크기는 수치모의로 도출된 마찰손실이 이론적으로 계산한 마찰손실보다 더 크게 발생함을 관측하였으며, 이는 수로의 형상이 비원형인 경우에는 관의 기하학적 형상에 의한 흐름구조의 변화로 추가적인 마찰손실이 발생하는 것이 원인으로 판단된다. 마찰손실의 증가는 난류보다 층류에서 두드러졌다. 따라서 터널의 홍수량 흐름 시 마찰손실계수가 터널의 형상에 좌우되며, 실무에서 정확한 설계를 위해 방수로 터널의 형상을 주의 깊게 고려해야 한다는 결론을 내렸다. 이는 실제 방수로 터널 설계에 활용될 수 있는 기본 정보를 제공할 수 있을 것으로 보인다.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1510-1519
• /
• 1994

It is important to understand the friction characteristics between piston-ring assembly and cylinder wall for the friction loss reduction as well as the solution of problem such as scuffing wear and oil consumption. A new system was developed for the piston-ring assembly friction force measurement. This system was applied to the friction force measurement to find its functional relationship with variables such as engine speed, oil viscosity, and engine load. The friction mean effective pressure(fmep) was found to have a linear relationship with$(\vpsilon{U})^{0.42}$ under motering and with$(\vpsilon{U})^{0.45}$ under firing operations, where $\vpsilon$ is the kinematic oil viscosity and U is mean piston speed.

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.265-269
• /
• 2009

The wear of the contact in the tappet accounts for the greatest portion of entire friction loss of an engine, leading to the occurrence of abnormal wear. The coated specimens for earn-tappet wear test were producted by using PVD-Sputtering coating method. It examined the friction characteristics occurring between the earn and the tappet by using the dedicated wear tester and found that the friction torque value was reduced through comparison testing with the existing part when the low friction coating was applied. So application of the low friction coating to actual vehicles will reduce the fuel economy and occurrence of noise-vibration.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.149-157
• /
• 2004

A Piston assembly is very important because it directly receives the energy generated during combustion process. Surely, the friction and lubrication of piston ring pack do an important role in the performance and fuel economy of an engine. in fact, the friction loss in piston ring pack is the biggest portion to the whole engine friction. Therefore, the improvement of lubrication quality and friction loss in piston ring pack will be directly related with the improvement in the performance and fuel economy of an engine. Meanwhile, the oil consumption and blow-by gas through piston-cylinder-ring crevices have to be controlled as less as possible. In these two aspects, the study on the optimized design of piston ring pack has to be carried out. In this study, for the efficient design of piston ring pack, it is focused to develop a basic computer program that predicts the inter-ring pressure, the motion of ring and the blow-by gas through a crevice volume model between adjacent rings, and the oil film thickness and the friction computed by lubrication theories.