• 펄프종이기술
• /
• 제36권3호
• /
• pp.15-34
• /
• 2004

Diverse benefits such as reduction of fresh water consumption and effluent discharge, efficient use of raw materials and energy savings can be obtained by papermaking system closure. Closure of papermaking processes, however, causes many problems including reduction of the efficiency of additives, decrease of retention and dewatering, felt plugging, poor Paper quality, generation of slime and odor, poor vacuum efficiency, etc, and it has been recognized that accumulation of Inorganic and organic substances in the process white water is the prime cause of these problems. Therefore, technological developments for preventing accumulation of these detrimental substances are urgently required for Implementing papermaking system closure. Understanding of the accumulation phenomena of the inorganic and organic substances in the papermaking process white water is prerequisite for papermaking system closure. In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch In the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Starch adsorption and desorption models were developed based on the concept of starch adsorption ratio, which was not considered in previous studies. Steady state simulation studies were carried out based on this model using a commercial simulator. In steady state simulation, the variation of dissolved starch concentration in each process unit was monitored as a function of white water usage for wire shower. The result of the steady state simulation showed that dissolved starch concentration and its increase ratio in Process units increased as white water usage ratio for wire shower increased.

• Advances in concrete construction
• /
• 제9권4호
• /
• pp.345-354
• /
• 2020

Cement is the most significant component in concrete. Large scale manufacturing of cement consumes more energy and release harmful products (Carbon dioxide) into the atmosphere that adversely affect the environment and depletes the natural resources. A lot of research is going on in globally concentrating on the recycling and reuse of waste materials from many industries. A major share of research is focused on finding cementitious materials alternatives to ordinary Portland cement. Many industrial waste by-products such as quartz powder, metakaolin, ground granulated blast furnace slag, silica fume, and fly ash etc. are under investigations for replacement of cement in concrete to minimize greenhouse gases and improve the sustainable construction. In current research, the effects of a new generation, ultra-fine material i.e., alccofine which is obtained from ground granulated blast furnace slag are studied as partial replacement by 25% and with varying amounts of sulfonated naphthalene formaldehyde (i.e., 0.3%, 0.35% and 0.40%) on mechanical, water absorption, thermal and microstructural properties of concrete. The results showed moderate improvement in all concrete properties. Addition of SNF with combination of alccofine showed a significant enhancement in fresh, hardened properties and water absorption test as well as thermal and microstructural properties of concrete.

• 멤브레인
• /
• 제27권2호
• /
• pp.109-120
• /
• 2017

양이온($Na^+$) 및 음이온($Cl^-$)이 각각의 CEM과 AEM을 통해 선택적으로 분리되어 담수로 이동할 때 발생되는 전위차와 산화/환원(redox couple)형 전해질을 포함하고 있는 전극에서 발생하는 전류를 이용하여 전기 에너지로 전환시키는 에너지변환장치이다. RED 시스템의 핵심소재 중 하나인 이온교환막은 높은 출력 밀도를 달성하기 위해 1) 낮은 팽윤거동, 2) 적절한 이온교환능, 3) 높은 이온전도도, 4) 높은 이온선택성을 만족시켜야 한다. 본 논문에서는 이를 만족시키는 소재 및 이온교환막의 연구동향 및 전망에 대해 설명하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.497-500
• /
• 2005

This study was performed to evaluate the characteristics which are slump, air content and time of set in fresh concrete and compressive strength of hardened concrete containing slag powder and fly-ash. Replacement rate of FA is fixed on 10$\%$ and replacement rate of slag powder are 0$\%$, 20$\%$ and 30$\%$. Also AE water-reducing agents(standard type, accelerating type) are used. The results were as follows. (1)Slump flow of concrete using AE water-reducing agents is similar. Flowability is incresed when replacement rate of slag powder is increased due to slag powder's ball bearing reaction.(2)Time of set of concrete using accelerating type agent is more faster than that of concrete using standard type agent because of ettringite generation that promote setting.(3)Early strength of three-component concrete using accelerating type agent is higher than that using standard type agent. Therefore cumulative pore is reduced due to ettringite

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.369-375
• /
• 2008

생태산업단지의 주요 목표인 무배출(zero-emission)을 달성하기 위해서는, 기업간의 효과적인 용수 재이용망의 구축이 요구된다. 다양한 서브시스템과 의사결정과정을 포함한 복잡한 망 구조를 이루기 때문에 생기는 모델링 부분에서의 문제점을 해결하기 위하여, 본 연구에서는 새로운 모델링 기법인 에이전트기반 모델링(agent based modeling, ABM)을 도입하였다. 에이전트기반 모델링 기법을 이용해 물질교환망 내의 기업을 에이전트화 하고 이를 토대로 전체 시스템을 모사하는 방법론을 제시하였으며, 이를 이용해 실제 산업단지 내 기업에 대한 간단한 용수교환망 설계 모델을 구축하였다. 에이전트기반 모델에 기초한 용수재이용망은 용수공급에서 35% 감소를 보이며 폐수 배출량은 약 50%가 감소하였다. 실제 산업단지 모델링 결과 에이전트기반 모델은 시스템 변동시에도 전체 시스템을 수정할 필요가 없으며, 시스템이 확장하는 경우에도 그 적용이 용이하기 때문에 생태산업단지와 같은 복잡한 시스템의 모델링과 설계시 유용한 기술로 사용될 수 있음을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.190.1-190.1
• /
• 2016

One of the most serious problems faced by billions of people today is the availability of fresh water. According to statistics, 15% of the world's total output of dye products is discharged into the environment as dye wastewater, which seriously pollutes groundwater resources. For the treatment of chemically and biologically contaminated water the advanced oxidation processes (AOPs) shows the promising action. The main advantage with AOPs is the ability to degrade the organic pollutants to $CO_2$ and $H_2O$. For this degradation process the AOPs generation of powerful and non-selective radicals that may oxidize majority of the organic pollutants present in the water body. To generate the various reactive chemical species such as radicals (${\bullet}OH$, ${\bullet}H$, ${\bullet}O$, ${\bullet}HO_2$) and molecular species ($H_2O_2$, $H_2$, $O_2$) in large amount in water, we have used the atmospheric pressure plasma. Among the reactive and non-reactive species, the hydroxyl radical (${\bullet}OH$) plays important role due to its higher oxidation potential (E0: 2.8 V). Therefore, in this work we have checked the degradation of various dyes such as methyl orange, methylene blue and congo red using different type of atmospheric pressure plasma sources (Indirect jet and direct jet). To check the degradation we have used the UV-visible spectroscopy, HPLC and LC-MS spectroscopy. Further, to estimate role of ${\bullet}OH$ on the degradation of dyes we have studied the molecular dynamic simulation.

• 생물환경조절학회지
• /
• 제11권2호
• /
• pp.81-87
• /
• 2002

근권냉방 방식에 따른 냉방 효율과 토마토 생육 특성을 검토하고자 XL냉수순환, 라디에이타 냉풍, 패드냉풍 및 대조구를 처리한 결과는 다음과 같다. 근권부 냉방온도는 공급수온이 17.8$^{\circ}C$일 때 XL 냉수순환구는 18.$0^{\circ}C$ 라디에이타 냉풍구는 27.2$^{\circ}C$, 패드 냉풍구는 20.3$^{\circ}C$였다. 배지 깊이와 시간대별 평균온도는 XL냉수순환구 22.8~24.7$^{\circ}C$. 라디에이타 냉풍구 22.7~24.2$^{\circ}C$, 패드 냉풍구 20.5~23.2$^{\circ}C$, 대조구 25.9~29.6$^{\circ}C$를 나타내어 냉방처리구가 대조구에 비해 5~6$^{\circ}C$더 낮았다. 토마토의 생육에 있어 엽장. 엽폭은 대조구에 비해 컸으며, 생체중 및 건물중의 경우에서도 비슷한 경향이었다 근활력에 있어 대조구는 45.0ug/g에 비해 근권냉방 처리구는 58.5-62.8 ug/g으로 높았으나. 근권냉방 처리구간에는 큰 차이가 없었다.

• Natural Product Sciences
• /
• 제21권3호
• /
• pp.210-218
• /
• 2015

The antioxidant activity of white ginseng was not recorded in Korea Functional Food Code, while its activity of red ginsengs was recorded. The aim of this study was to evaluate the antioxidant and hepato protective effect of different ginsengs in H₂O₂-treated HepG2 cells. White and red ginseng were prepared from longitudinal section of the same fresh ginseng (4-year old). The whole parts of white and red ginsengs were separately extracted with 70% ethanol and distilled water respectively, at 70 ℃ to obtain therapeutic ginseng extracts namely, WDH (distilled water extract of white ginseng), WEH (70% ethanol extract of white ginseng), RDH (distilled water extract of red ginseng) and REH (70% ethanol extract of red ginseng). In this work, we have investigated the DPPH, hydroxyl radical, Fe²⁺-chelating activity, intracellular ROS scavenging capacity and lipid peroxidation of different ginsengs. All these extracts showed a dose dependent free-radical scavenging capacity and a ROS generation as well as lipid peroxidation was significantly reduced by treatment with bioactive extracts of white ginsengs (WDH) than red ginsengs. Additionally, white ginseng extracts (WDH) has dramatically increased intracellular antioxidant enzyme activities like superoxide dismutase and catalase in H₂O₂-treated HepG2 cells. All these results explain that administration of white ginseng is useful as herbal medicine than red ginseng for chemoprevention of liver damage.

• 한국농공학회논문집
• /
• 제50권5호
• /
• pp.3-15
• /
• 2008

This study aims to simulate the 3 dimensional (3D) model of Keum-man connection canal using geographic information system (GIS) as well as considering design in viewpoint of engineering. The canal connects from Keumkang to Mangyungkang in order to supply fresh water into Saemankeum lake. This study used 3 dimensional spatial planning model (3DSPLAM) process to generate the 3D model, which has not only several planning layers in actual process, but also their corresponding layers in modeling process to simulate 3D space of rural villages. The discharge of the canal is $20m^3/s$ on slope of 1/28,400 in the canal length of 14.2km, which consists of pipe line and open channel. This study surveyed the route of the canal and its surrounding environment for facilities to make images in the 3D graphic model. Besides, the present study developed data set in GIS for geogrphical surface modeling as well as parameters in hydraulic analysis for water surface profile on the canal using HEC-RAS model. From the data set constructed, this study performed analysis of water surface profile with HEC-RAS, generation of digital elevation model (DEM) and 3D objects, design of the canal section and route on DEM in AutoCAD, and 3D canal model and its surrounding 3D space in 3DMAX with virtual reality. The study result showed that the process making 3D canal model tried in this study is very useful to generate computer graphic model with the designed canal on the surface of DEM. The generated 3D canal can be used to assist decision support for the canal policy.

• 한국축산식품학회지
• /
• 제36권5호
• /
• pp.650-655
• /
• 2016

This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat.