• 제목/요약/키워드: Frequency selectivity

검색결과 152건 처리시간 0.024초

AR 코팅된 DFB 레이저에서 격자 위상의 영향 (Effect of Grating Phase in DFB Lasers with an Anti-reflection Coated Mirror)

  • 권기영;기장근;조현묵
    • 문화기술의 융합
    • /
    • 제7권3호
    • /
    • pp.463-468
    • /
    • 2021
  • 본 연구에서는 1.55um의 파장을 갖는 DFB 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 오른쪽 거울 면에 반사가 일어나지 않도록 유전막 코팅을 하여 𝜌r=0 이 되도록 하였다. 𝛿L>0인 경우일 때, 발진 모드에 대하여, 발진 주파수와 발진 이득의 특성을 해석했다. 좌측 거울면의 격자 위상이 𝜋에서부터 𝜋/2 계속 감소할 때, 각 모드의 그래프 선들이 좌측으로 조금씩 이동한다. 발진 모드의 문턱 이득이 가장 낮은 경우는 𝜅L=10인 경우이고, 이때 모드 선별성은 상대적으로 낮다. 모드 선별성이 우수한 경우는 𝜅L=0.5에서부터 𝜅L=6 정도까지이고, 이 경우 주파수 안정성이 우수하다. 두 개의 벽개면을 갖는 경우와 비교하면, 한 개의 무반사면을 갖는 경우, 발진 모드의 문턱 이득이 증가하지만 모드 선별성은 2배 정도 더 우수해 진다.

무반사 코팅된 DFB 레이저 다이오드에서 발진 모드와 격자 위상 (Oscillation Mode and Grating Phase in DFB Laser Diode with an Anti-reflection Coated Mirror)

  • 권기영;기장근
    • 문화기술의 융합
    • /
    • 제8권5호
    • /
    • pp.483-488
    • /
    • 2022
  • 본 연구에서는 1.55um의 파장을 갖는 DFB 레이저 다이오드에서 이득 격자와 굴절률 격자가 동시에 존재할 때, 오른쪽 거울면에 무반사 코팅을 하여 ρr=0 이 되도록 하였다. δL<0인 경우일 때, 발진 모드에 대하여, 발진 주파수와 발진 이득의 특성을 해석했다. 좌측 거울면 상에서 격자의 위상이 π에서부터 π/2씩 연속적으로 감소할 때마다, 각 발진 모드의 (αL, δL) 그래프 선들이 좌측으로 δL 값이 약 0.6 정도씩 낮아지고 있음을 볼 수 있다. 문턱이득이 가장 낮은 발진 모드의 경우는 κL=10인 경우이고, 이때 모드 선별성은 다른 κL 값의 경우와 비교할 때 상대적으로 낮다. 모드 선별성이 우수한 경우는 κL=0.1 에서부터 κL=6 정도까지이고, 모드 선별성이 우수할수록 주파수 안정성이 우수하다. 두 개의 벽개면을 갖는 경우와 비교하면, 무반사 코팅을 한 DFB 레이저 다이오드는, 발진 모드의 문턱 이득은 약 2배 정도로 높아지지만 모드 선별성 측면은 2배 정도 더 우수해 진다.

Analysis on the body size selectivity for multi-species of discarding juvenile fishes in the bottom trawl

  • KIM, Yonghae
    • 수산해양기술연구
    • /
    • 제55권3호
    • /
    • pp.181-189
    • /
    • 2019
  • Discarding juvenile fishes under girth 16 cm nearly equal to inner perimeter of codend mesh size collected by a cover net method in bottom trawl. The body size of the main five species (mackerel, horse mackerel, sea bream, melon seed and black throat seaperch) was measured for their body length, girth, weight, height and width and analyzed size selectivity. Frequency of penetrating fish as retention in a cover net was less than 40% of total number of juvenile discarding fish. The most of body length or girth of five species were significantly different between in the codend and in the cover net. The 50% selection girth in the cover net ranged 8-11 cm were smaller than those in the codend ranged 9-13 cm by the species respectively. The 50% selection body length was significantly related with the ratio of body height (H) by body width (W) both for in the codend or in the cover net while 50% selection girth was not significantly related with H/W. Furthermore 50% selection fish size by fish species between in the codend and in the cover net was not significantly different both in body length or girth. Therefore, the girth selectivity represented possibly as one unique value regarding fish body shape was considered as more useful method for multi-species catch in trawl.

능동 인덕터를 이용한 주파수 가변형 대역통과 필터 설계 (Frequency-Tunable Bandpass Filter Design Using Active Inductor)

  • 이석진;최석우
    • 한국산학기술학회논문지
    • /
    • 제14권7호
    • /
    • pp.3425-3430
    • /
    • 2013
  • 최근 이동통신 시장의 급속한 증가에 따라 단말기 설계는 다표준 방식으로 발전하고 있다. 본 논문에서는 다표준 이동통신 시스템에 적용할 수 있는 주파수 가변형 능동 RC 대역통과 필터를 능동 인덕터를 사용하여 설계하였다. 기존의 대역통과 필터 설계법에서는 저지대역의 감쇠 특성과 통과대역의 주파수 선택도를 향상시키기 위하여 필터의 차수를 높게 하거나 극점 Q를 증가시키는 설계법을 사용한다. 본 논문에서는 극점 Q가 높은 능동 인덕터로 대역통과 필터를 설계하여 주파수 특성이 향상되었다. 또한 설계된 대역통과 필터는 튜닝 회로를 이용하여 필터의 중심주파수와 이득을 간단히 조절할 수 있도록 제안하였다. 설계된 능동 RC 대역통과 필터 특성은 TSMC $0.18{\mu}m$ 공정 파라미터를 이용하여 해석하였다. 시뮬레이션 결과, Q=20.5를 갖는 능동 인덕터를 이용한 필터는 1.86GHz 중심주파수에서 90MHz의 대역폭을 갖고, 튜닝 회로의 커패시터 값으로 중심주파수를 1.86~2.38GHz 범위까지 튜닝이 가능하여 다표준 무선통신 시스템에 적용할 수 있다.

직접변환수신기에 적합한 주파수 혼합기의 특성분석 (Frequency Miner Characteristics for Direct Conversion Receiver)

  • 박필재;유현규;조한진
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
    • /
    • pp.154-157
    • /
    • 2000
  • One of the problems using DCR(Direct Conversion Receiver) type architecture are DC offset, Poor channel selectivity. APDP(Anti Parallel Diode Pair) can be mood candidate for the DCR frequency mixer due to its inherent 2nd harmonic suppression. APDP shows good IP2 and DC suppression. This paper describes single APDP LO power characteristics, IP2, and receiver structure utilizing APDP frequency mixer.

  • PDF

Selective etching of SiO2 using embedded RF pulsing in a dual-frequency capacitively coupled plasma system

  • 염원균;전민환;김경남;염근영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.136.2-136.2
    • /
    • 2015
  • 반도체 제조는 chip의 성능 향상 및 단가 하락을 위해 지속적으로 pattern size가 nano size로 감소해 왔고, capacitor 용량은 증가해 왔다. 이러한 현상은 contact hole의 aspect ratio를 지속적으로 증가시킨바, 그에 따라 최적의 HARC (high aspect ratio contact)을 확보하는 적합한 dry etch process가 필수적이다. 그러나 HARC dry etch process는 많은 critical plasma properties 에 의존하는 매우 복잡한 공정이다. 따라서, critical plasma properties를 적절히 조절하여 higher aspect ratio, higher etch selectivity, tighter critical dimension control, lower P2ID과 같은 plasma characteristics을 확보하는 것이 요구된다. 현재 critical plasma properties를 제어하기 위해 다양한 plasma etching 방법이 연구 되어왔다. 이 중 plasma를 낮은 kHz의 frequency에서 on/off 하는 pulsed plasma etching technique은 nanoscale semiconductor material의 etch 특성을 효과적으로 향상 시킬 수 있다. 따라서 본 실험에서는 dual-frequency capacitive coupled plasma (DF-CCP)을 사용하여 plasma operation 동안 duty ratio와 pulse frequency와 같은 pulse parameters를 적용하여 plasma의 특성을 각각 제어함으로써 etch selectivity와 uniformity를 향상 시키고자 하였다. Selective SiO2 contact etching을 위해 top electrode에는 60 MHz pulsed RF source power를, bottom electrode에는 2MHz pulse plasma를 인가하여 synchronously pulsed dual-frequency capacitive coupled plasma (DF-CCP)에서의 plasma 특성과 dual pulsed plasma의 sync. pulsing duty ratio의 영향에 따른 etching 특성 등을 연구 진행하였다. 또한 emissive probe를 통해 전자온도, OES를 통한 radical 분석으로 critical Plasma properties를 분석하였고 SEM을 통한 etch 특성분석과 XPS를 통한 표면분석도 함께 진행하였다. 그 결과 60%의 source duty percentage와 50%의 bias duty percentage에서 가장 향상된 etch 특성을 얻을 수 있었다.

  • PDF

BER Performance of OFDM Combined with TDM Using Frequency-Domain Equalization

  • Gacanin, Haris;Takaoka, Shinsuke;Adachi, Fumiyuki
    • Journal of Communications and Networks
    • /
    • 제9권1호
    • /
    • pp.34-42
    • /
    • 2007
  • Orthogonal frequency division multiplexing (OFDM) combined with time division multiplexing (TDM), in this paper called OFDM/TDM, can overcome the high peak-to-average-power ratio (PAPR) problem of the conventional OFDM and improve the robustness against long time delays. In this paper, the bit error rate (BER) performance of OFDM/FDM in a frequency-selective Rayleigh fading. channel is evaluated by computer simulation. It is shown that the use of frequency-domain equalization based on minimum mean square error criterion (MMSE-FDE) can significantly improve the BER performance, compared to the conventional OFDM, by exploiting the channel frequency-selectivity while reducing the PAPR or improving the robustness against long time delays. It is also shown that the performance of OFDM/FDM designed to reduce the PAPR can bridge the conventional OFDM and single-carrier (SC) transmission by changing the design parameter.

Robust Pilot-aided Frequency Offset Estimation Scheme for OFDM-based Broadcasting System with Cyclic Delay Diversity

  • Shin, Won-Jae;You, Young-Hwan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제7권12호
    • /
    • pp.3055-3070
    • /
    • 2013
  • This paper proposes an improved carrier frequency offset (CFO) and sampling frequency offset (SFO) estimation scheme for orthogonal frequency division multiplexing (OFDM) based broadcasting system with cyclic delay diversity (CDD) antenna. By exploiting a periodic nature of channel transfer function, cyclic delay and pilot pattern with a maximum channel power are carefully chosen, which helps to enable a robust estimation of CFO and SFO against the frequency selectivity of the channel. As a performance measure, a closed-form expression for the achievable mean square error of the proposed scheme is derived and is verified through simulations using the parameters of the digital radio mondiale standard. The comparison results show that the proposed frequency estimator is shown to benefit from properly selected delay parameter and pilot pattern, with a performance better than the existing estimator.

Sidelobe Suppression Enhancement of Radiofrequency Photonic Filters via Time-to-frequency Mapping

  • Song, Min-Hyup
    • Journal of the Optical Society of Korea
    • /
    • 제18권5호
    • /
    • pp.449-452
    • /
    • 2014
  • We present a multi-tap microwave photonic filter with high selectivity through applying time-to-frequency mapping and optical frequency comb shaping techniques. When arranged in the time-to-frequency mapping stage, by a Fourier transform, the deviation of the optical taps to the target profile is significantly reduced while maintaining the apodization profile, resulting in high sidelobe suppression in the filters. By applying a simple time-to-frequency mapping stage to the conventional optical frequency combs, we demonstrate a substantially enhanced (>10dB) sidelobe suppression, resulting in filter lineshapes exhibiting a significantly high (>40dB) main lobe to sidelobe suppression ratio. These results highlight the potential of the technique for implementation in various passband filters with high sidelobe suppression.

직접 변환수신기 (direct conversion receiver)에 적합한 DC offset이 없는 주파수 변환기를 채용한 직접변환 수신기의 설계 (Direct Conversion receiver adapting DC offset free diode mixer)

  • 박필재;유현규;조한진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
    • /
    • pp.361-364
    • /
    • 2000
  • One of the problems using DCR(Direct Conversion Receiver) are DC offset, poor channel selectivity. APDP(Anti Parallel Diode Pair) can be good candidate for DCR frequency mixer due to its inherent End harmonic suppression. APDP shows good IP2 and DC suppression. This paper describe single APDP LO power characteristics, IP2, and receiver structure utilizing APDP frequency mixer

  • PDF