• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.510-513
• /
• 2018

최근 전자파 적합성(EMC: electromagnetic compatibility)의 중요성이 매우 높아짐에 따라 칩 수준에서의 전자파 간섭(EMI: electromagnetic interference) 측정이 자주 요구되고 있다. IEC 61967 및 IEC 62508에서 규정된 근거리 전자장 스캐닝(NFS: near-field scanning) 시스템은 칩 레벨에서의 전자파 간섭을 분석하는 대표적인 방법이다. 칩이 점점 고속화되면서 근거리 전자장 스캐닝 시스템의 측정 주파수는 광대역화되어야 하지만 근거리 전자장 탐침(NFP: near-field probe)의 신호 대 잡음 비(SNR: signal-to-noise ratio)가 저하된다는 문제가 있다. 본 논문에서는 근거리 전자장 스캐닝 시스템에서 광대역 특성을 가지면서도 잡음 대 성능 비를 향상시키는 기술에 대해 살펴본다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.593-597
• /
• 2002

The paper introduces a research on the W-band Millimeter Wave Radiometer(RADW92) through an airborne experiment. Microwave remote sensing images of part of the Yellow River and the WeiHe River are of fared. Analysis of factors influencing the image qualities as well as the resolutions to them are also included. The RADW92 is the first generation of Millimeter Wave Radiometer in China, which works with operating frequency 92 GHz, the bandwidth 2 GHz, the integration time 60ms, the system sensitivity 0.6k and the linearity better than 0.999. Cassegrain Antenna is designed for imaging by conically scanning. The result of the experiment suggested that RADW92 had been adequate for space use.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1846-1848
• /
• 1999

A technique is investigated for achieving broadband properties by controlling the operation frequency of microstrip antennas. The control is achieved by applying DC and AC bias to the microstrip antenna. Air gap antenna with pzt post and microstrip antenna with simple rectangular patch on the $LiNbO_3$ substrate were fabricated. In the case of Air gap antenna, the variation of operating frequency was 11Mhz and $LiNbO_3$ antennas was 11Mhz. Also, frequency scanning was achieved by appling AC bias.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1063-1067
• /
• 2001

The effect of the pulse parameters(pulse ratio and frequency) on the characteristics of the nitrided layer in the pulsed plasma nitrified SCM435 Steels was investigated. Material properties of the nitrided layer were analysed by employing optical microscope, scanning electron microscope(SEM), X-ray diffractometer(XRD) and micro-Vickers hardness tester. It was found that both the compound layer thickness and the surface hardness decreased with decreasing of pulse ratios. At high pulse ratio, the compound layer thickness and the surface hardness were rapidly decreased with decreasing frequency compared to lower pulse ratios.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.246-251
• /
• 2012

Pulse electrochemical polishing process has been used to improve mechanical properties such as surface roughness and corrosion resistance on conductive metallic materials. In addition, pulse electrochemical polishing process with various frequency may produce a lustrous, smoother, deburred and cleaned surface on workpiece. The aim of this paper is to study surface characteristics of pulse electrochemical polishing for various frequency conditions using AFM to verify localized surface variation in nanometer scale.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.464-471
• /
• 2011

We tried to analyze sound field of the interior of housing installed with an impeller using the Boundary Element Method (BEM) with the Kirchhoff-Helmholtz integral equation. In order to increase the accuracy of our analysis, reverse engineering technology, which has been developed in recent years. We measured and treated geometrical data with 3D scanning of the practical research object. After modeling by the reverse engineering, we analyzed variation of the BPF as adding vibration frequency and variation of the sound field of the interior of housing by changing the number of impeller blades. We also tried an analysis of free degree variation. Then, we proposed the analysis accuracy and noise reducing method by analysis result.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.317-320
• /
• 2002

The effect of vibration on the viscosity of a shear-thinning fluid was investigated with a newly designed pressure-scanning capillary viscometer. The viscometer was designed to measure non-Newtonian viscosity continuously over a range of shear rates at a time. Low frequency vibration was applied perpendicularly to the direction of the flow. The effect of the transversal vibration was investigated for both Newtonian fluids and non-Newtonian fluids. The experimental results showed that the vibration had no effect on the viscosity of the Newtonian fluids. However, the vibration caused a significant reduction of the shear-thinning fluid viscosity. The viscosity reduction was strongly dependent on both vibration frequency and shear rate. In addition, the viscosity reduction was affected by the amplitude of vibration, and, the bigger amplitude applied, the more viscosity reduction occurred.

• The Journal of the Acoustical Society of Korea
• /
• 제29권2E호
• /
• pp.73-85
• /
• 2010

In the diagnostic ultrasound (US) transducer technology, the high frequency US(HFUS) transducer over 20 MHz is one of the current issues to be pursued for better resolution with the expense of penetration. HFUS single element transducers and the mechanical scanning systems for imaging are reviewed, and HFUS array transducers are also briefly summarized. HFUS applications such as the human applications in ophthalmology and dermatology and small animal applications for research purposes are reviewed with vascular and blood imaging in this paper.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.787-794
• /
• 1995

To improvement the magnetic and frequency properties of YIG(Yttrium-Iron Garnet) in microwave region, it is investigated that the effect of $Al^{3+}$ ions on magnetic and frequency characteristics of YIG, using samples of basic YIG composition( $Y_{3}$F $e_{5}$ $O_{l2}$) added with A1$_{2}$ $O_{3}$ from 0 to 2.5 [mol%]. The measurment is conducted mainly for the structural properties and magnetical properties. The structural properties is measured using SEM(Scanning Electro Microscope), EDX(Energy-dispersive X-ray spectrometer) and XRD(X-ray diffraction equipment). The magnetical properties is measured with B-H curve tracer and impedance analyzer. As a result, it is confin-ned that the effect of eddy current loss is minimized while maintaining high saturation flux density of YIG, when YIG is added with 0.5 [mol%] of A1$_{2}$ $O_{3}$.>.>.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.247-252
• /
• 2013

본 논문에서는 결함 접지 구조를 갖는 다중 공진기를 이용하여 인식 코드를 생성한 주파수 스캔 방식의 마이크로파 태그 시스템을 제안하였다. 기존의 칩 기반 RFID가 시간 순차 비트에 의한 코드를 저장하였던 반면, 제안된 방식은 주파수에 따른 순차적 비트 인식을 공진기를 이용하여 구현함으로써 완벽한 수동 태그를 설계하였다. 또한, 공진기로 사용한 맴돌이형 결함 접지 구조는 전송선로의 후방 배치가 가능하여 리더 신호의 공진기 재방사에 의한 비트 오류를 줄일 수 있을 뿐만 아니라, 우수한 대역 저지 특성을 가지고 있다. 제안된 마이크로파 태그는 UWB 안테나와 함께 3~7 GHz 대역에서 설계되었으며, 무반향실 환경에서 다양한 5비트 코드의 인식 실험 결과 우수한 특성을 확인하였다.