• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.700-702
• /
• 2016

나로우주센터에서는 우주발사체의 비행임무 초기구간 동안에 발사체의 거리 및 속도정보를 획득하기 위해서 광학추적장비에 거리측정 도플러 레이더를 탑재하여 운용하고 있다. 본 논문은 광학추적장비의 MFCW(Multi Frequency Continuous Wave)방식과 FMCW(Frequency Modulation Continuous Wave)방식 도플러 레이더 구성과 거리측정 방법을 기술하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.61-62
• /
• 2022

The unit quantity is an important factor influencing the durability, workability, and quality of concrete. Methods for measuring the unit quantity include a high frequency heating method, a unit volume mass method, a capacitance method, and a microwave method. However, these methods have disadvantages of poor measurement method, time required, and accuracy, and a relatively experimental method compensating for these disadvantages was used to measure the unit quantity using a high frequency main sensor (FDR) capable of simple and fast measurement. In addition, the unit quantity was evaluated by analyzing the measurement data through deep learning.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.866-874
• /
• 2008

Motor frequency can be measured by a hall sensor. Among the many hall sensors, a linear type hall sensor is good at high accuracy frequency measuring problem. However, in general, this linear type hall sensor has DC offset which can vary along sensor's operating voltage change. Therefore, In motor frequency measurement problem using the linear hall sensor, it needs an estimator that can estimate frequency and DC offset simultaneously. In this paper, we propose the least mean square estimator to estimate motor frequency. To verify its performance, we compare the LMS estimator with a commercial analog tachometer. Experimental results shows the proposed LMS estimator works well in varying frequency and stationary DC offset.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.39-40
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1738-1740
• /
• 1996

Laser Doppler Vibrometer using heterodyne method with a 632.8 nm He-Ne laser, has been developed for the measurement of small displacement and velocity. The measurement uses heterodyne method can be made insensitive to undesired vibration effect acting the system and can yield the sign of Doppler shift at the expense of increased complexity. A Bragg cell gives a frequency shift of 40MHz for heterodyne method. Frequency Modulated output is detected by spectrum analyzer.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.465-468
• /
• 2009

전력 계통에서 계통 주파수는 부하의 변동에 따라 변화되어 연결된 발전기에 영향을 미치고 결국 계통에 커다란 지장을 초래한다. 그러므로 계통 주파수의 빠른 측정과 신속한 조속기 제어는 전력 계통의 안정성과 경제성에서 매우 중요한 부분이다. 과거의 전자기계식 주파수 계전기는 전력 소비가 크며 정확한 측정이 어려웠고, 이후 연구 개발된 디지틀 계전기는 노이즈와 왜곡의 영향을 많이 받으며, 최근에 개발된 Microprocessor 계전기는 고가의 장비에 50ms에서 수초정도의 주파수 측정시 시간상의 문제점을 가지고 있다. 본 연구에서는 주파수를 신속하고 정확하게 측정할 수 있는 개선된 알고리즘을 Matlab 프로그램에서 시뮬레이션하고 DSP6713 KIT에 프로그래밍하여 작동하였다. 임의의 전압파형을 DSP에 입력하고 동작시킴으로서 신속하게(약 30ms) 정확한 주파수를 측정하여 알고리즘의 효용성을 구현하였다.

• 한국전자파학회논문지
• /
• 제8권5호
• /
• pp.525-533
• /
• 1997

건축연구에서의 수분측정 방법을 개선하기 위하여 비파괴적인 수분측정기술을 응용하였다. 본 실험은 연속적이고 비파괴적인 측정에서의 핵심요소로서 자유공간에서의 혼 안테나를 사용하여 실험하였으며 사용한 기술은 마이크로파 브릿지 장치로서 9.5GHz의 주파수에서 함수율이 1~12% 범위의 모래수분을 측정하였다. 이로부터 대표적인 교정곡선을 구하였다. 이를 바탕으로 마이크로파를 이용한 석탄, 제지, 식품 미치 건축재료 등과 같은 비금속내의 수분측정이 가능함을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.601-606
• /
• 1993

The natural frequency measurement of passenger car tire under the load and rotation are studied. In order to obtain theoretical natural frequency and mode shape, the plane vibration of a tire is modeled to that of circular beam. By using the Tickling method based on Hamilton's principle, theoretical results are determined by considering tension force due to tire inflation pressure, rotational velocity and tangential, radial stiffness. Modal parameters varying the inflation pressure, load, rotational velocity are determined experimentally by using frequency response function method. The results show that experimental conditions are parameter for shifting of natural frequency.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.1-13
• /
• 1996

The measurement of radial directional natural frequency ina passenger car tire rotating under the load is studied. In order to obtain theoretical matural frequency and mode shape, the ploane vibration of a tire is modeled to that of circular beam. By esing the Tieking method based on Hamiltons's principle, theoretical results are determined by considering tension horce due to tire inflation pressure, retational velocity and tangential, radial stiffness. Radial directional modal parameters varying with the inflation pressure, load, rotational velocity are experimentally determined by using frequency response function method. The results show that experimental conditions canbe considered as the parameters which shift the natural frequency.

• The Journal of the Acoustical Society of Korea
• /
• 제21권1E호
• /
• pp.12-17
• /
• 2002

Two improvements are discussed in measurement of the complex Young's modulus of the acoustic materials by using the transfer function method. It is found that the accelerometer misalignment might result in the severe measurement error, particularly in high frequency range. The supporting structure is modified to attach the upper and lower accelerometers along the vertical axis. Secondly, the method fur solving the equation associated with wave model is described. The solution of the lumped mass-spring model is chosen as the starting value for low frequency range, while in the mid and high frequency, the solution to the previous frequency step is used as the initial values. Measurements are done for hard and soft rubber specimens. It is shown that the erroneous peaks in the transfer function, due to the measurement error, cause highly incorrect Young's modulus and loss factors.