• Journal of the Korean Institute of Navigation
• /
• v.12 no.3
• /
• pp.1-21
• /
• 1988

A Satellite -aided search and rescue system is expected for its many advantage of global coverage, instantaneousness and low cost. In this paper, a calculation method is proposed , by which a position of distress can be determined with doppler frequency received through an orbital satellite. First, an algorithm and program is developed for calculating the position of distress with the received doppler frequency of EPIRB(Emergency Position Indicating Radio Beacon) with the least square method. Then, position error caused by the drift of the transmitting frequency is evaluated. The evaluation is made by the simulation using NNSS satellite orbital elements and varying position of EPIRB, numbers of Doppler data and magnitudes of various errors. As the result, the availability of this program for a satellite-aided search and rescue system is confirmed and the bounds of expected positioning accuracy is clarified.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.188-190
• /
• 2009

본 연구에서는 독립운전 검출기법의 능동적 기법 중 AFDPF 기법을 IEEE Std 929-2000에 제시된 독립운전 시험 조건하에서 위상동기기법 영점검출방식(Zero Crossing PLL)을 적용하여 독립운전 시 chopping fraction에 따른 PCC(Point of Common Coupling)의 주파수 변동 특성을 PSIM을 통하여 분석하였다

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.92-96
• /
• 2004

Islanding of PV systems can cause a variety of problems and must be prevented. However, if the real and active powers of RLC load and PV system are closely matched, islanding detection by passive methods becomes difficult. Active methods enables islanding detection by forcing the frequency of the voltage in the island to drift up/down. This paper shows the simulation and comparision by Matlab for the active methods.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.61-63
• /
• 1998

A B-H curve measuring system for testing softmagnetic materials was constructed. This system can measure the B-H curve in the low frequency(0.1 - 1 Hz) range. The drift of the integrator can be moderately removed by software technique. The advantages of the developed system are easier to measure B-H curve compared with conventional measuring system and low cost.

• Journal of Korean Port Research
• /
• v.5 no.2
• /
• pp.77-84
• /
• 1991

This paper is compared with fourier series and least square polynomial fit and interpolation to mechanism stated number in electro-optical distance measuring instrument. Systematic instrumental errors occurring in electro-optical systems include uncertainties in the position of the electrical center of the transmitter, uncertainties in the effective center of the reflectors. frequency drift and instrument nonlinearity. Microwave systems are affected by uncertainties in the electrical centers of the master and remote units and by a phenomenon called group swing or reflection. As the result of this study, mechanism stated number will be used as verification of electro0optical measuring instrument to distance measurement.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2064-2069
• /
• 2008

The Resonance Control Cooling System (RCCS) prototype installed in KAERI site has been designed to control the resonant frequency of the normal conducting drift tube linac (DTL) for the Proton Engineering Frontier Project (PEFP). The RCCS water pumping skid is composed of two channels as a by-passing the cooling water and a plate heat exchanger. The required temperature can be achieved by mixing both channels in order to control its the resonant frequency at 350 MHz. The temperature controlled water pumping skid operates in combination with the Low Level Radio Frequency (LLRF) system. We have discussed the design, modeling with each components, control scheme, fabrication and test results of the water pumping skid for resonant frequency control of the DTL cavity. In conclusion, the fabricated RCCS prototype through the optimization of modeling has corresponded with the design requirement and concept.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.317-325
• /
• 2022

In this paper, we developed a single frequency-based RRAIM to monitor integrity of the UAM landing vertically in urban area with only low-cost single-frequency GPS receiver. Conventional dual-frequency RRAIM eliminates ionospheric delay through a combination of frequencies. In this study, ionospheric delay was directly modeled. Drift error of residual ionospheric delay is modeled using the previously studied result on ionospheric rates of change. To verify the performance of the proposed RRAIM algorithm, a simulation of vertical landing UAM in urban area was conducted. It was assumed that the protection level at the initial position was calculated through SBAS correction data. During vertical landing, integrity monitored by receiver alone without external correction data. In the 60 sec simulation, the protection level of the proposed RRAIM compared to the conventional RRAIM was calculated to be 140% due to the accumulated ionospheric delay error. Nevertheless, it was confirmed that the final vertical protection level meeting the requirements of LPV-200, which cannot be achieved with single frequency GPS receiver alone.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.10-18
• /
• 2001

The very large floating structure which can be used for as airport may be as large as several kilometer long and wide. The first order wave forces as well as wave drift forces are very important forces on such a very large floating structures. In the present study, the time simulation of motion responses for dolphin-moored VLFS in waves is presented. The hydrodynamic coefficients and wave forces involved in the equations are obtained from a three-dimensional panel method in the frequency domain. The horizontal drift forces and mooring forces for dolphin systems are taken into account. As for numerical example, time domain analyses are carried out for a VLFS(Phase I) in irregular wave condition.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.1
• /
• pp.27-31
• /
• 2011

In this paper, the electron transport characteristics in $CF_4$ has been analysed over the E/N range 1~300[Td] by a two-term approximation Boltzmann equation method and by a Monte Carlo simulation. The motion has been calculated to give swarm parameters for the electron drift velocity, longitudinal diffusion coefficient, the ratio of the diffusion coefficient to the mobility, electron ionization and attachment coefficients, effective ionization coefficient, mean energy, collision frequency and the electron energy distribution function. The electron energy distribution function has been analysed in $CF_4$ at E/N=5, 10, 100, 200 and 300[Td] for a case of the equilibrium region in the mean electron energy and respective set of electron collision cross sections. The results of Boltzmann equation and Monte Carlo simulation have been compared with experimental data by Y. Nakamura and M. Hayashi. The swarm parameter from the swarm study are expected to serve as a critical test of current theories of low energy electron scattering by atoms and molecules, in particular, as well as crucial information for quantitative simulations of weakly ionized plasmas.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2741-2761
• /
• 2017

With the purpose of copyright protection for digital video, a novel H.264/AVC watermarking algorithm based on JND model is proposed. Firstly, according to the characteristics of human visual system, a new and more accurate JND model is proposed to determine watermark embedding strength by considering the luminance masking, contrast masking and spatial frequency sensitivity function. Secondly, a new embedding strategy for H.264/AVC watermarking is proposed based on an analysis on the drift error of energy distribution. We argue that more robustness can be achieved if watermarks are embedded in middle and high components of $4{\times}4$ integer DCT since these components are more stable than dc and low components when drift error occurs. Finally, according to different characteristics of middle and high components, the watermarks are embedded using different algorithms, respectively. Experimental results demonstrate that the proposed watermarking algorithm not only meets the imperceptibility and robustness requirements, but also has a high embedding capacity.