• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1060-1070
• /
• 2003

The frequency selective surface for use in Ka/Ku band parabolic antenna of domestic satellite communications is proposed. The frequency selective surface structure consists of the infinite periodic arrays of the triple square loop slot element with narrow width on the honeycomb structure of multi-layered dielectric. The frequency selective surface is fabricated and measured. The good agreement is obtained between theory and experiment. It is demonstrated that the frequency selective surface passes 14/12 GHz band wave while reflecting 30/20 GHz band wave as required.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.682-685
• /
• 2014

In this paper, we presented the window applicable blind-type frequency selective surface to control the coverage area of wireless communication in secure building or conference room. The proposed frequency selective structure has the reconfigurable frequency range depends on its blind rotation angle. To verify the proposed structure, we fabricated the window blind-type frequency selective surface with four-legged loaded element and ring-type element as a unit cell and performed measurements of the transmission characteristics for different blind rotation angles to prove the feasibility. The measurement results show good agreements with the simulation results. One of the advantages is that the proposed structure does not need to have a bias circuit, so it is very easy to implement at low cost and also can be applied to any planar surface for wireless security applications.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.69-75
• /
• 2017

This study presents a dual-band 3D frequency selective surface that provides a large degree of freedom in frequency and bandwidth adjustability. The proposed structure is evaluated in terms of its structural parameters, and prototypes are fabricated. The radius of the copper rings and the height of the cylinders are considered, and are shown through full-wave electromagnetic simulations to have a significant effect on the frequency characteristics of the frequency selective surface. The measurement results of the fabricated samples are compared with the simulation results, and a satisfactory agreement is obtained.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.481-485
• /
• 2004

We consider electromagnetic field radiation properties of a current filament placed at the origin of a cylindrical frequency selective surface (CFSS). The CFSS consists of free standing metal strips with two-dimensional periodicity. The analysis is based on a cylindrical Floquet mode wave expansion technique. We observed that near the half wavelength resonance frequencies, there exist some specific frequencies at which the surface becomes totally transparent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1242-1246
• /
• 2007

In this study, FSS(Frequency Selective Surface) with Koch Fractal Curve slot is positioned on the conventional single layer microstrip patch antenna. Numerical results of the proposed antenna bandwidth and the antenna gain are increased compared with those of the conventional single layer microstrip patch antenna. In the future, the fractal geometry of the slot in FSS(Frequency Selective Surface) as a supplementary microstrip patch is researched for the enhancement of the microstrip patch antenna characteristics.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.3
• /
• pp.311-317
• /
• 2014

In this paper, the flexible and reconfigurable frequency selective surface for C-band was designed using patch array and grid structure for radome and other curved surface applications. Frequency reconfigurability was obtained by varying the capacitance of varactor diode and flexibility is implemented by using flexible PCB. For the validity of the proposed structure, we fabricated the flexible and reconfigurable frequency selective structure and measured the frequency reconfigurability for different bias voltages and different curvature surfaces from the optimized design parameters. From the measurement results, we know that the proposed structure has the wideband reconfigurable frequency bandwidth of 6.05-7.08GHz. We can apply this proposed structure to the curved surface like as radome of aircraft or warship.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.71-77
• /
• 2023

In this paper, a dual-band stopband frequency selective surface that can be applied to Wi-Fi 6E systems is designed to block external interfering signals with adjacent operating frequency spectrum in indoor wireless LAN environments. The proposed frequency selective surface structure has frequency blocking characteristics in the 2.4GHz and 6GHz bands, and is realized through a modified crossed dipole structure and an interlocking puzzle form between unit structures. The proposed structure is designed to have stable frequency response characteristics with respect to incident angle and polarization, and the experimental results show good agreement with the simulation results for incident waves from 0° to 45°.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.328-334
• /
• 2012

In this paper, we analyzed the electromagnetic characteristics of the spherical frequency selective surface with different arrangement of crossed dipole slot elements for reducing the RCS(radar cross section). The three dimensional MOM(method of moment) with RWG basis is used to analyze the proposed structure. To reduce the simulation time, we applied the BiCGSTab(Biconjugate Gradient Stabilized) algorithm as an iterative method and presented the comparison results with Mie's theoretical results for PEC sphere to show the validity of this paper. From the simulation results, the different arrangement of elements array showed the difference RCS that cannot be negligible. The arrangement method of element in frequency selective surface will be one of variables for the design of curved frequency selective structures.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.607-615
• /
• 2019

In this paper, the electromagnetic effects on the discontinuity structures of the frequency selective radome in manufacturing process based on the X-band were analyzed. In order to fabricate a curved radome using a planar frequency selective surface structure, it is assumed that gaps, slanted gaps, pattern damage, and pattern misalignment between FSS patterns, which are discontinuous elements that can occur at the joint surface of the FSS panel. FSS specimens including continuous elements were fabricated and the frequency transmission characteristics were measured in a free space measurement environment. From the measurement results, resonance frequency shift, transmission performance degradation, and bandwidth variations were found to be the largest when the damaged pattern was bonded to the junction of FSS panels.