• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.25-30
• /
• 1998

Time-lapse crosswell seismic data, recorded before and after the cavity filling, showed that the filling increased the velocity at a known cavity zone in an old mine site in Inchon area. The seismic response depicted on the tomogram and in conjunction with the geologic data from drillings imply that the size of the cavity may be either small or filled by debris. In this study, I attempted to evaluate the filling effect by analyzing velocity measured from the time-lapse tomograms. The data acquired by a downhole airgun and 24-channel hydrophone system revealed that there exists measurable amounts of source statics. I presented a methodology to estimate the source statics. The procedure for this method is: 1) examine the source firing-time for each source, and remove the effect of irregular firing time, and 2) estimate the residual statics caused by inaccurate source positioning. This proposed multi-step inversion may reduce high frequency numerical noise and enhance the resolution at the zone of interest. The multi-step inversion with different starting models successfully shows the subtle velocity changes at the small cavity zone. The inversion procedure is: 1) conduct an inversion using regular sized cells, and generate an image of gross velocity structure by applying a 2-D median filter on the resulting tomogram, and 2) construct the starting velocity model by modifying the final velocity model from the first phase. The model was modified so that the zone of interest consists of small-sized grids. The final velocity model developed from the baseline survey was as a starting velocity model on the monitor inversion. Since we expected a velocity change only in the cavity zone, in the monitor inversion, we can significantly reduce the number of model parameters by fixing the model out-side the cavity zone equal to the baseline model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.728-739
• /
• 2020

Using webometric big data, this study examines the diversity of online information sources about the novel coronavirus causing the COVID-19 pandemic. Specifically, it focuses on some 28 countries where confirmed coronavirus cases occurred in February 2020. In the results, the online visibility of Australia, Canada, and Italy was the highest, based on their producing the most relevant information. There was a statistically significant correlation between the hit counts per country and the frequency of visiting the domains that act as information channels. Interestingly, Japan, China, and Singapore, which had a large number of confirmed cases at that time, were providing web data related to the novel coronavirus. Online sources were classified using an N-tuple helix model. The results showed that government agencies were the largest supplier of coronavirus information in cyberspace. Furthermore, the two-mode network technique revealed that media companies, university hospitals, and public healthcare centers had taken a positive attitude towards online circulation of coronavirus research and epidemic prevention information. However, semantic network analysis showed that health, school, home, and public had high centrality values. This means that people were concerned not only about personal prevention rules caused by the coronavirus outbreak, but also about response plans caused by life inconveniences and operational obstacles.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.107-117
• /
• 2004

The growing demand for customer-response, made-to-order manufacturing and satisfactory delivery are stimulating the importance of commercial fleet management problem. Moreover, the rapid transformation to the customer-oriented multi-frequency, relatively small fleet, such as home delivery and Perishable goods, requiring prompt delivery and advanced real-time operation of vehicle fleets. In this paper we consider the vehicle routing problem(VRP) to minimize delivery completion time which is equal to the time that last customer wait for the vehicle in fleet operation. The mathematical formulation is different from those for the classical VRP which is minimizing cost/distance/time by running vehicles in manager's point of view. The key aspect of this model is not considering the return time from the last customer to depot in every vehicle path. Thereby, the vehicle dispatcher can afford to dynamically respond to customer demand and vehicle availability. The customer's position concerned with minimizing waiting time that may be applied for the delivery of product required freshness or delivery time. Extensive experiments are carried out to compare the performance of minimizing delivery completion time by using the ILOG Solver which has the advantage of solving quickly an interim solution very near an optimal solution. The experimental results show that the suggested model can easily find near optimal solution in a reasonable computational time under the various combination of customers and vehicles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1301-1307
• /
• 2011

Electrosurgical knee wand (EKW) is a high-frequency thermocautery instrument and is often used for coagulation, ablation, excision, and extirpation of knee ligaments and tissues. In order to maximize the success rate, ease, and safety of knee surgery using EKW and radiofrequency ablation, it is necessary to ensure that the EKW selectively approaches the lesion with utmost accuracy and safety. The key feature of this instrument is its excellent maneuverability. Hence, the authors constructed a tensile spring model based on a shape memory alloy (SMA), which exhibits the shape memory effect. This model can be used in knee surgery as it is considered the most biocompatible femorotibial surgical actuator. The changes in external temperature with current and the thermoelectric characteristics of the SMA were investigated. The relationship between the restoring force and the typical stroke (TS) in response to the conditions in the SMA tensile spring design were evaluated. In conclusion, as the diameter of the SMA tensile spring decreased, the maximum temperature increased. The strain in the actuator caused a stable and proportional increase in the force and induced current for up to 15s, but this increase became very unstable after 30s. Moreover, the relationship between the current and the TS was more stable than that between the current and the restoring force.

• Toxicological Research
• /
• v.22 no.4
• /
• pp.357-364
• /
• 2006

This study was undertaken to develop a reliable mice model demonstrating similar immunologic phenomena as human atopic dermatitis characterized with predominance of type-2 immune response. BALB/C mice and NC/Nga mice were sensitized twice with $100{\mu}l$ of 1% 2,4-dinitrochlorobenzene (DNCB) or vehicle (acetone : olive oil=4:1 mixture) in a week and challenged twice with $100{\mu}l$ of 0.2% DNCB or the vehicle at the following week. Mice were sacrificed at 19 days following the second DNCB or vehicle challenge for NC/Nga mice and at 28 days following the second DNCB or vehicle challenge for BALB/c mice. Upregulation of plasma 1gE, a hallmark of atopic dermatitis occurrence, was evident in the plasma obtained 4 day after the second DNCB challenge from BALB/c mice (approximately 4-fold) and NC/Nga mice (approximately 6-fold) treated with DNCB in comparison with that of the vehicle treated-control mice, and remain higher $3{\sim}4$ week after the second challenge. Ratio of plasma IgG1 versus IgG2a concentration was significantly higher in the mice treated with DNCB than the control mice, which also implies the skewed type-2 reactivity in vivo. Ratio of interleukin-4 versus interferon gamma produced in the splenic T cell culture supernatants was approximately 3-fold higher in the both strains of mice treated with DNCB than their control mice, respectively. The DNCB-treated mice demonstrated atopic dermatitis-like skin legions characterized with erythma, scaling, and hemorrhage, which was not observed with the control mice. Scratching on face or dorsal area was significantly more frequent (approximately 25-fold) in the DNCB-treated mice than the control at next day of the second DNCB challenge, and scratching frequency remains higher (approximately 4-fold) in the mice treated with DNCB than the control at 14 day following the second DNCB challenge. Overall, the mice model developed through sensitization and challenge with DNCB may be useful for research on atopic dermatitis and development of treatment materials for atopic dermatitis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.200-214
• /
• 1993

This paper presents the results of fluidelastic instability analysis performed for the U-tube bundle of a Westinghouse model 51 steam generator, one of the recirculating types designed at an early stage, in which the principal region of external cross-flow is associated with the U-bend portion of tube. The prerequisites for this analysis are detailed informations of the secondary side flow conditions in the steam generator and the free vibration behaviours of the U-tubes. In this study, the three-dimensional two-phase flow field in the steam generator has been calculated employing the ATHOS3 steam generator two-phase flow code and the ANSYS engineering analysis code has been used to calculate the free vibration responses of specific U tubes under consideration. The assessment of the potential instability for the suspect U-tubes, which is the final analysis process of the present work, has been accomplished by combining the secondary side velocity and density distributions obtained from the ATHOS3 prediction with the relative modal displacement and natural frequency data calculated using the ANSYS code. The damping of tubes in two-phase flow has been deduced from the existing experimental data by taking into account the secondary side void fraction effect. In operation of the steam generator, the tube support conditions at the tube-to-tube support plate intersections due to either tube denting degradation or deposition of tube support plate corrosion products or ingression of dregs. Thus, various hypothetical cases regarding the tube support conditions at the tube-to-tube support plate intersections have been considered to investigate the clamped support effects on the forced vibration response of the tube. Also, the effect of anti-vibration bars support in the curved portion of tube has been examined.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1069-1077
• /
• 2008

The railway abrasion measurement system have to satisfy two conditions to increase the measurement accuracy as follows. The laser region which is projected on the rail have to be extracted without the geometrical distortion. The mapping of the acquired laser region data on the rail profile have to be processed exactly. But, the conventional railway abrasion measurement system is deeply effected by the foreign substance( dust, rainwater, and so on ) on the railway or the sensitive response characteristic of the laser to the external measurement circumstance, and then the measurement errors arise from above factors. When the laser region is projected on the rail extracts from the acquired image, the interference of the light with the same frequency as the laser system occurs the serious problems. In the process of the mapping between the railway profile and the extracted laser region, the measurement accuracy is very highly effected by the geometrical distortion and the abnormal variation. In this Paper, we propose the novel method to increase the accuracy of the railway abrasion measurement dramatically. we designed and manufactured the high precision and fast image processing board with DSP Core and FPGA to measure the railway abrasion. The image processing board has the capability that the image of 1024X1280 from camera can be processed with the speed of 480 frame/sec. And, we apply the image processing algorithm base on the wavelet to extract the laser region is projected on the rail exactly. Finally, we developed high precision railway abrasion measurement system with the error range less than +/-0.5mm by which 2D image data is covered 3D data and mapped on the rail profile using the camera model and the perspective transform.

• Atmosphere
• /
• v.30 no.4
• /
• pp.377-390
• /
• 2020

Not only emissions, but also atmospheric circulation is a key factor that affects local particulate matters (PM) concentrations in Korea through ventilation effects and transboundary transports. As part of the atmospheric circulation, air stagnation especially adversely affects local air quality due to weak ventilation. This study investigates the large-scale circulation related to air stagnation over Korea during winter and projects the climate change impacts on atmospheric patterns, using observed PM data, reanalysis and regional climate projections from HadGEM3-RA with Modified Korea Particulate matter Index. Results show that the stagnation affects the PM concentration, accompanied by pressure ridge at upper troposphere and weaken zonal pressure gradient at lower troposphere. Downscaling using HadGEM3-RA is found to yield Added-Value in the simulated low tropospheric winds. For projection of future stagnation, SSP5-8.5 and SSP1-2.6 (high and low emission) scenarios are used here. It has been found that the stagnation condition occurs more frequently by 11% under SSP5-8.5 and by 5% under SSP1-2.6 than in present-day climate and is most affected by changes in surface wind speed. The increase in the stagnation conditions is related to anticyclonic circulation anomaly at upper troposphere and weaken meridional pressure gradient at lower troposphere. Considering that the present East Asian winter monsoon is mainly affected by change in zonal pressure gradient, it is worth paying attention to this change in the meridional gradient. Our results suggest that future warming condition increase the frequency of air stagnation over Korea during winter with response of atmospheric circulation and its nonlinearity.

• Journal of Korea Water Resources Association
• /
• v.56 no.6
• /
• pp.393-402
• /
• 2023

Drought, which has been increasing in frequency and magnitude due to recent abnormal weather events, poses severe challenges in various sectors. To address this issue, it is important to develop technologies for drought monitoring, forecasting, and response in order to implement effective measures and safeguard the ecological health of aquatic systems during water scarcity caused by drought. This study aimed to predict water quality fluctuations during drought periods by integrating the watershed model HSPF and the water quality model QUAL-MEV. The researchers examined the SPI and RCP 4.5 scenarios, and analyzed water quality changes based on flow rates by simulating them using the HSPF and QUAL-MEV models. The study found a strong correlation between water flow and water quality during the low flow. However, the relationship between precipitation and water quality was deemed insignificant. Moreover, the flow rate and SPI6 exhibited different trends. It was observed that the relationship with the mid- to long-term drought index was not significant when predicting changes in water quality influenced by drought. Therefore, to accurately assess the impact of drought on water quality, it is necessary to employ a short-term drought index and develop an evaluation method that considers fluctuations in flow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.721-733
• /
• 2023

As the frequency of extreme rainfall events increase due to climate change, climate change adaptation measures have been proposed by the central and local governments. In order to reduce flood damage in urban areas, various flood response policies, such as low impact development techniques and enhancement of the capacity of rainwater drainage networks, have been proposed. When these policies are established, regional characteristics and policy-effectiveness from the cost-benefit perspective must be considered for the flood mitigation measures. In this study, capacity enhancement of rainwater pipe networks and low impact development techniques including green roof and permeable pavement techniques are selected. And the flood reduction effect of the target watershed, Gwanak campus of Seoul National University, was analyzed using SWMM model which is an urban runoff simulation model. In addition, along with the quantified urban flooding reduction outputs, construction and operation costs for various policy scenarios were calculated so that cost-benefit analyses were conducted to analyze the effectiveness of the applied policy scenarios. As a result of cost-benefit analysis, a policy that adopts both permeable pavement and rainwater pipe expansion was selected as the best cost-effective scenario for flood mitigation. The research methodology, proposed in this study, is expected to be utilized for decision-making in the planning stage for flood mitigation measures for each region.