• 전산구조공학
• /
• 제9권4호
• /
• pp.107-115
• /
• 1996

변위응답은 교량구조의 진동특성을 결정하는데 중요한 인자 중의 하나이다. 계측된 가속도 데이타를 진동수 영역에서 적분하여 변위응답을 경제적이고 합리적으로 구할 수 있다. 이를 위해 계측된 가속도 데이타를 이산화하기 위해 적절한 표본추출 진동수가 제시되었다. 캔틸레버 보를 이용한 실내시험에서 직접 계측된 변위와 적분된 변위는 서로 잘 일치하였다. 평가된 변위응답으로부터 구한 모우드 형상도 해석치와 근접하므로 개발된 방법은 실제로 효율적으로 사용될 수 있음을 입증하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.227-232
• /
• 2003

As the most precision equipment requiring very strict vibration environment are vulnerable to the surrounding vibration condition, they adapt the passive or active vibration isolation system. When it comes to the passive isolation system, the resonance of the isolation system causes excessive resonance response, and finally results in the degrade the equipment performance. This paper deals with the active control method to control this resonance induced response, and includes the experiment on the active control for controlling the resonance response on the table against the excitation of the same frequency with the natural frequency of the isolation system. The electromagnetic actuator was designed and the control effect was verified by the experiment. The experiment showed that the electromagnetic actuator is effective for controlling the low frequency isolation resonance response of the precision equipment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.363.2-363
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.71-77
• /
• 2002

The spectrum of impulse response signal which is obtained from an impulse hammer testing is used for frequency response function, nevertheless it has serious faults when the record length for the signal processing is not very long. The faults cannot be avoided with the conventional signal analyzer that is processing all the signals as if they are always periodic. The signals generated by the impact hammer are undoubtedly non-periodic because of the damping, and are acquired for limited recording time due to the memory as well as the computation performance of the signal analyzer. This paper will make clear the relation between the faults and the length of recording time, and propose the way for solving the faults.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.121-128
• /
• 1999

This paper presents a time domain method for soil-structure interaction analysis for seismic loadings. It is based on the finite element formulation incorporating analytical frequency-dependent infinite elements for the far field soil. The dynamic stiffness matrices of the far field region formulated using the present method in frequency domain can be easily transformed into the corresponding matrices in time domain. At first, the equivalent earthquake forces are evaluated along the interface between the near and the far fields from the free-field response analysis carried out in frequency domain, and the results are transformed into the time domain. An efficient procedure is developed for the convolution integrals to evaluate the interaction force along the interface, which depends on the response on the interface at the past time instances as well as the concurrent instance. Then, the dynamic responses are obtained for the equivalent earthquake force and the interaction force using Newmark direct integration technique. Since the response analysis is carried out in time domain, it can be easily extended to the nonlinear analysis. Example analysis has been carried out to verify the present method in a multi-layered half-space.

• Structural Engineering and Mechanics
• /
• 제11권1호
• /
• pp.71-87
• /
• 2001

A frequency domain response analysis is presented for building frames passively controlled by viscoelastic dampers, under harmonic ground excitation. Three different models are used to represent the linear dynamic force-deformation characteristics of viscoelastic dampers namely, Kelvin model, Linear hysteretic model and Maxwell model. The frequency domain solution is obtained by (i) an iterative pseudo-force method, which uses undamped mode shapes and frequencies of the system, (ii) an approximate modal strain energy method, which uses an equivalent modal damping of the system in each mode of vibration, and (iii) an exact method which uses complex frequency response function of the system. The responses obtained by three different methods are compared for different combinations of viscoelastic dampers giving rise to both classically and non-classically damped cases. In addition, the effect of the modelling of viscoelastic dampers on the response is investigated for a certain frequency range of interest. The results of the study are useful in appropriate modelling of viscoelastic dampers and in understanding the implication of using modal analysis procedure for building frames which are passively controlled by viscoelastic dampers against base excitation.

• 지구물리와물리탐사
• /
• 제19권2호
• /
• pp.84-90
• /
• 2016

신규 센서의 성능과 노후화된 센서의 성능 평가를 하는 것은 지진 감시 및 지진연구에 있어서 매우 중요하다고 할 수 있다. 특히 센서 주파수 응답은 지진자료의 보정을 위해서 필수적으로 사용되고 있다. 이 연구에서는 주파수 스펙트럼비를 이용한 지진 기록계의 보정 방법과 시간영역 대역통과필터(bandpass filter)와 힐버트(Hilbert) 변환을 이용한 지진계 주파수 응답을 계산하는 방법을 제시하고자 하였다. 실내 진동대 실험에서 가속도 센서(CMG-5T 1g, 2g 센서)를 설치하고 제안된 방법으로 센서 주파수 응답스펙트럼을 구하였을 때 좋은 결과를 얻을 수 있었다. 또한 2011년 도호쿠 대지진에 대하여 서울대학교 관측소(SNU)의 STS-2와 ES-T에서 얻어진 자료에 대하여 제안된 방법을 적용한 결과 STS-2 광대역 센서의 저주파수 대역에 대한 주파수 응답을 얻을 수 있었다. 대역통과필터와 힐버트 변환 방법을 이용할 경우, 주파수 스펙트럼비를 이용한 방법보다 신호대 잡음이 낮은 부분에서도 명확한 주파수 응답스펙트럼을 보여주었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.623-628
• /
• 2001

The styling of passenger car wheels and their effect on vehicle appearance has increased in importance in recent years. The wheel designer has been given the task of insuring that a wheel design meets its engineering objectives without affecting the styling theme. The wheel and tire system is considered as a vehicle component whose dynamic modal information of the tire/wheel system are employed in the modal synthesis model of the vehicle. The Vibration characteristics of a passenger car wheel play an important role to judge a ride comfortability and quality for a passenger car. In this paper, the vibration characteristics of a AI-alloy and steel wheel for passenger car are studied. Natural frequency, damping and mode shape are determined experimentally by frequency response function method. Results show that wheel material property, size and design are parameter for shift of natural frequency and damping.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.7-14
• /
• 1997

A rigorous analysis method of electromagentic scattering from frequency selective surface with gridded square loop elements in case of oblique incident and arbitrary polarization is presented, which uses the roof-top subdomain basis function. The frequency response and polarization characteristics of the reflected wave and the transmitted wave for various widths of the grid and the conductor square loop, and for the various gaps between the grid and the conductor square loop, and for the various gaps between the grid and square loop is investigated. To confirm the validity of presented method, frequency selective surfaces with gridded square loop elements are fabricated with honeycomb structures, calculate dvalues for the frequency response of the reflected wave and the transmitted wave for arbitrary incident angle and polarization are compared with measured values.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.408-413
• /
• 2003

The frequency response function(FRF) of each substructure is used for the transfer function synthesis method(TFS). The dynamic characteristics of the full system are obtained by synthesizing FRFs of each substructure. The validation of TFS depends on accuracy for FRF of each substructure. Impact hammer testing Is widely used to obtain the modal characteristics of structures However. the FRF obtained from impact hammer testing contains bias errors, such as finite record length error and leakage error of which characteristic depends on data acquisition time which we call record length. In this paper, a method to remove hose errors is proposed so as to enhance results of TFS. Numerical and experimental examples show that the FRF of full structure can be predicted nearly exactly by the method proposed in this paper.