• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.130-135
• /
• 2007

The purpose of this paper is that investigates the Natural Frequency behavior characteristic of wind turbine jacket type tower model, and calculated that the stress values of thrust load, wave load, wind load, current loda, gravity load, etc., environment evaluation analysis during static operating wind turbine jacket type tower model, carried out of natural frequency analysis of total load case to stress matrix, frequency calculated that calculated add natural frequency to stiffness matrix for determinant to stress results. The finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape.

• 한국통신학회논문지
• /
• 제40권2호
• /
• pp.372-379
• /
• 2015

최근 동영상 압축 표준은 세밀한 움직임 정보를 확보하기 위해 1/4 화소 단위의 움직임 예측 알고리즘을 사용하고 있다. 일반적인 동영상 부호화기에서 사용하는 공간 영역에서의 움직임 예측은 부화소 단위 움직임 예측을 위한 보간 기술의 적용으로 인한 계산량 증가 문제가 발생한다. 본 논문에서는 주파수 영역에서 shifting matrix를 이용한 부화소 정밀도의 움직임 예측 알고리즘을 제안한다. 주파수 영역에서 shifting matrix 알고리즘을 사용함으로써 낮은 계산량으로 부화소 움직임 예측을 수행할 수 있었으며, 실험 결과 공간 영역에서의 움직임 예측 알고리즘에 비해 낮은 비트량과 높은 PSNR(peak signal-to-noise ratio)을 제공함을 확인하였다.

• Wind and Structures
• /
• 제25권5호
• /
• pp.459-474
• /
• 2017

In this study an analytical expression is derived for the natural frequency of the wind turbine towers supported on flexible foundation. The derivation is based on a Euler-Bernoulli beam model where the foundation is represented by a stiffness matrix. Previously the natural frequency of such a model is obtained from numerical or empirical method. The new expression is based on pure physical parameters and thus can be used for a quick assessment of the natural frequencies of both the real turbines and the small-scale models. Furthermore, a relationship between the diagonal and non-diagonal element in the stiffness matrix is introduced, so that the foundation stiffness can be obtained from either the p-y analysis or the loading test. The results of the proposed expression are compared with the measured frequencies of six real or model turbines reported in the literature. The comparison shows that the proposed analytical expression predicts the natural frequency with reasonable accuracy. For two of the model turbines, some errors were observed which might be attributed to the difference between the dynamic and static modulus of saturated soils. The proposed analytical solution is quite simple to use, and it is shown to be more reasonable than the analytical and the empirical formulas available in the literature.

• 대한전자공학회논문지SP
• /
• 제40권6호
• /
• pp.124-131
• /
• 2003

본 논문에서는 최근 비디오 스트리밍 응용을 위해 만들어진 FGS((me granular scalability) 방식에서 주어진 비트율에서 인간 시각에 좀더 나은 화질을 얻기 위해 주파수 가중 방법을 제안한다. 제안된 방식에서는 각 DCT 계수의 사람 눈에 미치는 중요도를 고려하여 구해진 주파수 가중행렬을 비트평면 부호화를 사용하는 FGS 상향계층 부호화 동작에 적용될 수 있도록 주파수 천이 행렬로 바꾸어서 가중치를 부여한다. 본 논문에서 제안된 주파수 가중 방법을 통해 화질의 향상, 더 미세한 계위 부호화, 시간 영역에서 화질의 균일화를 얻을 수 있었다. 또한, 주파수 가중 방법을 통해 얻은 화질 개선을 설명하기 위해 기존에 사용하던 PSNR(peak signal to noise ratio) 대신에 인간 시각적인 관점에서의 오차만을 고려한 JNDE(just noticeable difference ewer)를 Weber의 법칙을 근거로 하여 새롭게 제안하였다.

• Structural Engineering and Mechanics
• /
• 제67권5호
• /
• pp.517-525
• /
• 2018

In this study, we investigate the vibration of single-walled carbon nanotubes embedded in a polymeric matrix using nonlocal elasticity theories with account arbitrary boundary conditions effects. A Winkler type elastic foundation is employed to model the interaction of nanobeam and the surrounding elastic medium. Influence of all parameters such as nonlocal small-scale effects, Winkler modulus parameter, vibration mode and aspect ratio of nanobeam on the vibration frequency are analyzed and discussed. The mechanical properties of carbon nanotubes and polymer matrix are treated and an analytical solution is derived using the governing equations of the nonlocal Euler-Bernoulli beam models. Solutions have been compared with those obtained in the literature and The results obtained show that the non-dimensional natural frequency is significantly affected by the small-scale coefficient, the vibrational mode number and the elastic medium.

• Journal of electromagnetic engineering and science
• /
• 제7권4호
• /
• pp.195-200
• /
• 2007

Doubly-selective channel estimator for orthogonal frequency division multiplexing(OFDM) systems is proposed in this paper. Based on the generalized complex exponential basis expansion model(GCE-BEM), we describe the time-variant channel with time-invariant coefficients over multiple OFDM blocks. The time variation of the channel destroys the orthogonality between subcarriers, and the resulting channel matrix in the frequency domain is no longer diagonal, but the main interference comes from the near subcarriers. Based on this, we propose a channel estimator with low pilot ratio. We first develop a least-square(LS) estimator under the assumption that only the maximum Doppler frequency and the channel order are known at the receiver, and then verify that the correlation matrix of inter-channel interference(ICI) is a scaled identity matrix based on which we derive an optimal pilot insertion scheme for the LS estimator in the sense of minimum mean square error. The proposed estimator has the advantages of low pilot ratio and robustness against inter-carrier interference.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.200-207
• /
• 2003

Today we have excellent motor drive system using high frequency carrier PWM control voltage source inverter with vector control strategy. In the other hand, we have met serious problems caused by high frequency switching. PWM Cyclo-converter called Matrix converter is expected as the new strategy possible to improve these problems and add some more convenient features suitable for new drive system with system integration. In this paper, we will introduce the background of this development and features of this converter from our research, additionally introduce remarkable active promotions for this converter as a survey.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.801-810
• /
• 2004

Parameter modification of a linear finite element model(FEM) based on modal sensitivity matrix is usually performed through an effort to match FEM modal data to experimental ones. However, there are cases where this method can't be applied successfully; lack of reliable modal data and ill-conditioning of the modal sensitivity matrix constitute such cases. In this research, a novel concept of introducing feedback loops to the conventional modal test setup is proposed. This method uses closed-loop natural frequency data for parameter modification to overcome the problems associated with the conventional method based on modal sensitivity matrix. We proposed the whole procedure of parameter modification using the closed-loop natural frequency data including the modal sensitivity modification and controller design method. Proposed controller design method is efficient in changing modes. Numerical simulation of parameter estimation based on time-domain input/output data is provided to demonstrate the estimation performance of the proposed method.

• 소음진동
• /
• 제4권2호
• /
• pp.155-161
• /
• 1994

The dynamic behavior of a complex mechanical structure can be identified by dividing the structure into a series of smaller structure, called sub- structure and by studying the dynamic characteristics of these components. Generally, the dynamic characteristics of mechanical structure are strongly affected by the properties of joint parameters. In this paper, to identify the dynamic characteristics of mechanical structure, and experimental identification method in which directrly measured frequency response function(FRF) is used is considered. The method does not use the procedure of complex matrix calculation but use that of real matrix calculation. To confirm this method, computer simulation is performed by using frequency response function mixed with noise, and the experimental study is performed about the simple structure. The dynamic characteristics of joint parameters and identified more accurately than in using the prcedure of complex matrix calculation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.429-434
• /
• 1998

The previously developed control design methodology, EALQR(Eigenstructure Assignment/LQR), has better performance than that of conventional LQR or eigen-structure assignment. But it has a constraint for the weigting matrix in LQR, that is the weighting matrix could be indefinite for high-order systems. In this paper, the effects of the indefinite weighting matrix in EALQR on the Sequency domain properties are analyzed. The robustness criterion and quantitative frequency domain properties are also presented. Finally, the frequency do-main properties of EALQR has been analyzed by applying to a flight control system design example.