• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.634-641
• /
• 2022

A frequency stable and tunable optoelectronic oscillator (OEO) incorporating an optical phase shifter and a phase-shifted fiber Bragg grating (PS-FBG) is designed and analyzed. The frequency tunability of the OEO can be realized by using a tunable microwave photonic bandpass filter consisting of a PS-FBG, a phase modulator. The optical phase compensation loop is used to compensate for the phase variations of the RF signal from the OEO by adjusting an optical phase shifter. Simulation results demonstrate that the output RF signals of the OEO can be tuned in a frequency range of 118 MHz to 24.092 GHz. When the ambient temperature fluctuates within ±3.9 ℃, the frequency drifts of the output RF signals are less than 68 Hz, the side-mode suppression ratios are more than 69.39 dB, and the phase noise is less than -92.49 dBc/Hz at a 10 kHz offset frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.656-665
• /
• 2015

In this paper, we improved the clarity and quality of the radar imaging by applying motion compensation for time-frequency transform in B-ISAR imaging. The proposed motion compensation algorithm using UWB radar is verified. B-ISAR algorithm procedure and time-frequency transform for improved motion compensation are provided for theoretical ground. The image was created by a UWB Radar B-ISAR imaging algorithm method. Also, creating a B-ISAR imaging algorithm for motion compensation of time-frequency transformation method was used. The B-ISAR Imaging algorithm is implemented using STFT(Short-Time Fourier Transform), GWT(Gabor Wavelet Transform), and WVD(Wigner-Ville Distribution) approaches. The performance of STFT is compared with the GWT and WVD algorithms. It is found that the WVD image shows more clarity and decreased spread phenomenon than other methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.223-228
• /
• 2010

In this paper, temperature compensation circuit for the X-band voltage controlled oscillator(VCO) is presented by using the temperature sensor with the OP-AMP circuit. The frequency drifting by the temperature could be compensated by applying the tuning voltage which include the linearly changing output voltage of the temperature sensor. As a result, the frequency variation is reduced to 6.6~4.4 MHzfrom the 71~73 MHz variation with the compensation circuit over -30~+$60^{\circ}C$ range, when VCO is operated in the frequency range of 9.95~10.05 GHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.76.3-76
• /
• 2001

In this paper, an adaptive disturbance compensation technique is used in a tracking problem, under which the tracking reference is unknown. Based on a simple disturbance observer that effectively estimates the low frequency components of disturbance, the feedforward compensation is applied in addition to the conventional feedback control. Under the proposed compensation method, sensitivity analysis is given to illustrate the effectiveness. Finally, the proposed method is applied to the tracking problem in an optical storage system.

• Journal of information and communication convergence engineering
• /
• v.14 no.3
• /
• pp.147-152
• /
• 2016

In radio-over-fiber (RoF) systems, nonlinear compensation is essential to improve performance. Among the several existing nonlinear compensation techniques, we investigate a predistortion technique for a directly modulated laser in an RoF system. First, we obtain the input-to-output response of a directly modulated laser at 160, 820, and 1,540 MHz. The results show that the laser response is dependent on the frequency band. Second, we design an optimal predistortion circuit to compensate for the nonlinear responses of three frequency bands. We design the predistortion circuit with two options: each predistortion circuit for each frequency band and one single predistortion circuit for all the three frequency bands. Finally, we present the simulation results of the predistortion system obtained using a commercial simulator. These results show that the third intermodulation distortion (IMD3) is improved by 0.6-9 dB for the three frequency bands with only a single predistortion circuit.

• Korean Journal of Child Studies
• /
• v.30 no.4
• /
• pp.1-14
• /
• 2009

This research examined perceptions of parents and directors of child-care centers about safety, injury prevention, and range and level of compensation. Subjects were 285 parents and 297 directors of child-care centersin Kyunggi Province.Data were analyzed by t-test. Results showed differences between perceptions of parents and directors : parents considered the content and frequency of safety education to be more important; directors considered preparation for safety and safety management of equipment for injury prevention to be more important. Parents thought that range of compensation should include travel to and from the child-care center; directors thought that range of compensation should include sudden infant death. There was no difference between parents and directors regarding amount, subject, and process of compensation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.3
• /
• pp.154-161
• /
• 2005

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.3
• /
• pp.173-184
• /
• 2022

Purpose : The purpose of this study was two-fold: to identify the effect of dental hygienist's self-determination motivation on their job engagement and to analyze the moderating effect of compensation satisfaction that affect the relevance. Methods : Data were collected using a structured self-report questionnaire administered to 260 dental hygienists working in dental hospitals and clinics in Busan, South Korea. These were analyzed using IBM SPSS Statistics version 26.0 and SPSS Process Macro 3.5. A frequency analysis, including the respondents' general characteristics, frequency, percentages, and standard deviations, was performed. A regression analysis was also performed using SPSS Process Macro to verify the moderating effect of compensation satisfaction in the effect of self-determination motivation on job engagement. Results : The self-determination motivation of the dental hygienists had a statistically significant positive effect on their job engagement, which was the dependent variable. Higher intangible compensation satisfaction levels led to a stronger effect of intrinsic motivation but a weaker effect of extrinsic motivation on job engagement. Moreover, higher tangible compensation satisfaction levels strengthened the effect of intrinsic motivation on job engagement. Conclusion : Recently, the demand for oral health care has been increasing, Competition in the dental medical service market warrants, high-quality dental services based on accurate diagnosis and treatment. In this context, dental hygienists' job engagement must be improved. For this purpose, increasing the satisfaction of dental hygienists with self-determination motivation and appropriate compensation is effective. In addition, attention must be paid to the moderating effect of compensation satisfaction on the relationship between intrinsic motivation and job engagement. On the basis of the implications of this study, the results can be used as basic data for improving dental hygienists' welfare system and manpower management.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.253-257
• /
• 2010

The frequency is an important operation parameter for the control, protection, and stability of a power system. The frequency as a key index of power quality can be indicative of system abnormal conditions and disturbances. Due to the sudden change in generation and loads or faults in power system, the frequency is supposed to deviate from its nominal value. It is essential that the frequency must be maintained very close to its nominal frequency. An accurate monitoring of the power frequency is essential to optimal operation and prevention for wide area blackout. As most conventional frequency estimation schemes are based on DFT filter, it has been pointed out that the gain error could cause defects when the frequency is deviated from nominal value. This paper presents an advanced frequency estimation technique using gain compensation to improve the performance of DFT filter based techniques. To evaluate performance of the proposed algorithm, the 765kV T/L system in Korea is simulated by EMTP-RV software. The proposed technique can reduce the gain error caused when the power system frequency deviates from nominal value.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1699-1709
• /
• 2015

Moving terminals like high-speed-train undergo high Doppler frequency shift, and this leads to carrier frequency offsets that have to be compensated to avoid degradation of communication performance. In multiple access mechanism like OFDMA, base-stations need complex hardware to compensate the uplink frequency offset. In this paper, we propose a method, which can reduce burden of the base-station and makes frequency offset estimation and compensation simple. This method contains transmitting new synchronization signal, estimating frequency offsets in base-station, transmitting feedback information to terminal, and compensating the offset in uplink transmission. Simulation results show the proposed method operates well in high Doppler frequency shift conditions of 500 km/h which is the requirements of 5G mobile communication.