• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.90-98
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions like high temperature and high pressure for an extended period time. Such material degradation lead to various component faliures causing serious accidents at the plant. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this study, both artificial creep degradation test using life prediction formula and frequency analysis by ultrasonic tests for their preparing creep degraded specimens have been carried out for the purpose of nondestructive evaluation for creep damage which can occur in high-temperature pipelline of fossil power plant. As a result of ultrasonic tests for crept specimens, we confirmed that the high frequency side spectra decrease and central frequency components shift to low frequency bans, and bandwiths decrease as increasing creep damage in backwall echoes.

• Journal of Biosystems Engineering
• /
• 제26권6호
• /
• pp.509-516
• /
• 2001

This paper introduced some advantages of the time-frequency analysis of vibration and investigated, using the time-frequency transform, the characteristics of the transient motion of a tractor seat, which occurred during the tractor traversed over a rectangular obstacle on the flat surface. The characteristics of the short-time courier and wavelet transforms as time-frequency analysis methods were introduced and discussed to figure out which is more suitable to the analysis of the transient motions of agricultural tractors. Using each transform, transient vibration of a tractor seat was analyzed. Results of the analysis showed that the transient vibration of the seat was influenced by the natural frequencies of vertical mode of chassis, pitching mode of engine and pitching mode of cab of the tractor. The time sequence of the natural mode of tractor vibration was also revealed by the time-frequency analysis. The vibration path analysis by the time-frequency transform showed that the vibration energies transmitted from the front mounts to the seat were less than those from the rear mounts. The energy reduction ratios between the cab mounts and seat were also estimated to be about 72∼78%. The front mounts showed larger reduction than the rear mounts. However, the reduction difference between the right and left sides mounts was negligibly small. The short time Fourier transform was found to be a proper method for investigating the transient motions of farm machines and their effects on the ride vibration.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.605-608
• /
• 2011

In this study, OSA (the obstructive sleep apnea) periods were detected in patients with OSA during sleep because of the treatment was different according to the frequency and symptoms of obstructive sleep apnea. ANS (autonomic nervous activity) was changed by obstructive sleep apnea periods so we intended to detect the periods to care the obstructive sleep apnea patients. RR intervals, SDNN (standard deviation of normal to normal) and RMSSD (root mean square standard deviation) were calculated in time domain analysis and LF (low frequency), HF (high frequency), NHF (normalized high frequency), NLF (normalized low frequency) were calculated in frequency domain analysis of HRV (heart rate variability) with obstructive sleep apnea patients. In this paper, SDNN (standard deviation of normal to normal) of time domain analysis were decreased in the obstructive sleep apnea periods. And NLF and LF/HF ratio were increased and NHF (normalized high frequency) was decreased in the frequency domain analysis. The parameters can be used to treat obstructive sleep apnea patients by detecting the obstructive sleep apnea periods such as CPAP (continuous positive airway pressure).

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.879-886
• /
• 2003

주파수 도약 대역확산시스템에서의 광대역 주파수 도약을 위해 주파수 합성기가 널리 이용된다. 따라서 본 논문에서는 효과적인 무선 디지털 데이터 전송 성능을 얻기 위한 FH-FSK 통신에 미치는 주파수 합성기의 영향을 분석하였다. 이를 위해 PLL의 성능을 좌우하는 위상 변화, 스퓨리어스의 발생, PLL의 과도응답 특성에 의해 영향을 받는 주파수 도약율 등 여러 가지 파라미터들에 따른 성능을 분석하였다. 전형적인 PLL을 사용한 주파수 도약 시스템에서는 주파수 도약을 위한 반송파 신호를 국부 발진기에서 만들어낸다. 반송파 간격이 협대역인 협대역 무선 통신 시스템일 경우에는 빠른 주파수 도약을 위한 PLL의 구현이 어렵다. 본 논문에서는 이런 문제점을 해결하기 위해 디지털 주파수 합성기/CPM 변조기를 사용하여 빠른 주파수 도약을 위한 PLL 구현이 가능함을 Matlab tool를 사용한 시뮬레이션 결과를 통해 분석할 수 있었다.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.431-441
• /
• 1999

In this study, the regional frequency analysis is used to determine each subbasin drought frequency with reliable monthly precipitation and the L-Moments method which is almost unbiased and has very nearly a normal distribution is used for the parameter estimation of monthly precipitation time series in Nakdong river basin. As the result of this study, the duration of '93-'94 is most severe drought year than any other water year and the drought frequency is established as compared the regional frequency analysis result of cumulative precipitation of 12th duration months in each subbasin with that of 12th duration months in the major drought duration. The Linear regression equation is induced according to linear regression analysis of drought frequency between Nakdong total basin and each subbasin of the same drought duration. Therefore, as the foundation of this study, it can be applied proposed method and procedure of this study to the water budget analysis considering safety standards for the design of impounding facilities large-scale river basin and for this purpose, above all, it is considered that expansion of reliable preciptation data is needed in watershed rainfall station.

• 대한의용생체공학회:의공학회지
• /
• 제38권4호
• /
• pp.211-217
• /
• 2017

During the emergency situation such as cardiac arrest, cardiopulmonary resuscitation(CPR) is the most important treatment to maintain patient's blood circulation. Since the quality of CPR can not be easily measured or evaluated by the eye, an assistive device with an accelerometer can help to assess the pressure depth of CPR. In this study, we propose a single frequency analysis method to reduce the error of the accelerometer by extracting only one frequency component from the Fourier transform process. To verify the effectiveness of the single frequency analysis, acceleration data at CPR conditions were measured at a sampling rate of 50 / sec using a wristband equipped with an acceleration sensor. Then, We compared the existing distance estimation method and the single frequency analysis method using the measured data. The amplitude value proportional to the compression depth was obtained by applying the single frequency analysis method.

• 한국지반공학회논문집
• /
• 제24권12호
• /
• pp.113-120
• /
• 2008

1차원 지반응답해석은 지반에 의한 지진동의 증폭현상을 모사하는 데 널리 사용되고 있다. 가장 널리 사용되고 있는 등가선형 지반응답해석기법은 유효변형률에 상응하는 전단탄성계수와 감쇠비를 전 주파수 영역에 일률적으로 적용하며, 진동주파수에 대한 지반 응답의 영향을 고려하지 않는다. 지반의 비선형 거동을 주파수영역에서 보다 정확하게 모사하기 위하여 진동주파수와 지반거동의 상관관계를 주파수-변형률 곡선으로써 모의하는 등가선형해석기법이 개발되었으며, 이 방법은 기존의 등가선형해석기법에 비하여 정확성을 향상시킨다고 알려져 있다. 이제까지 다양한 형상의 주파수변형률 곡선이 제안되었으며, 이들은 한결같이 해석의 정확성을 증가시킨다고 주장된 바 있다. 본 연구에서는 기존의 연구에서 제안되었건 두 개의 주파수-변형률 관계 완화곡선과 본 연구에서 새롭게 제안된 세 개의 곡선을 이용하여 주파수 의존성을 고려한 등가선형해석기법의 정확성을 검증하였다. 검증에는 세 개의 부지에서 기록된 6개의 지진파가 사용되었다. 해석결과, 완화곡선은 지반응답에 지배적인 영향을 미치는 것으로 나타났으며, 주파수 의존성을 고려한 해석은 정확성을 향상시킬수 있는 것으로 나타났다. 하지만, 모든 사례에서 가장 정확하게 응답을 예측하는 완화곡선은 없는 것으로 나타났으며, 해석사례별로 최적의 완화곡선이 다른 것으로 나타났다. 따라서, FDEL 해석 수행 시, 다양한 완화곡선을 사용해야 할 것으로 판단되며 등가선형해석과 병행해서 수행되어야 한다고 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.110-114
• /
• 2012

We studied on the nondestructive evaluation of the elastic wave signal of SiC ceramics and SiC/SiC composite ceramics under monotonic tensile loading. The elastic wave signal of cross and unidirectional SiC/SiC composite ceramics were obtained by pencil lead method and bending test. It was applied for the time-frequency method which used by the discrete wavelet analysis algorithm. The time-frequency analysis provides time variation of each frequency component involved in a waveform, which makes it possible to evaluate the contribution of SiC fiber frequency. The results were compared with the characteristic of frequency group from SiC slurry and fiber. Based on the results, if it is possible to shift up and design as a higher frequency group, we will can make the superior material better than those of exiting SiC/SiC composites.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.168-174
• /
• 2016

In this paper, current control using PI controller in the synchronous reference frame is analyzed through the relationship among bandwidth, resonance frequency, and sampling frequency in the grid-connected inverter with LCL filter. Stability is investigated by using bode plot in frequency domain and root locus in discrete domain. The feedback variable is the grid current, which is regulated by the PI controller in the synchronous reference frame. System delay is modeled as 1.5Ts, which contains computational and PWM modulator delay. Two resonance frequencies are given at 815 Hz and 3.16 kHz from LCL filter parameters. Sufficient phase and gain margins can be obtained to guarantee stable current control, in case that resonance frequency is above one-sixth of the sampling frequency. Unstable current control is performed when resonance frequency is below one-sixth of the sampling frequency. Analysis results of stability from frequency response and discrete response is the same regardless of resonance frequency. Finally, stability of current control based on theoretical analysis is clearly verified through simulation and experiment in grid-connected inverters with LCL filter.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.135-138
• /
• 2009

Most of the studies use model order reduction for low frequency (LF) response analysis due to their high computational efficiency. In LF response analysis, one of model order reduction, algebraic substructuring (AS) retains all LF modes when using the modal superposition. However, in mid-frequency (MF) response analysis, the LF modes make very little contribution and also increase the number of retained modes, which leads to loss of computational efficiency. Therefore, MF response analysis should consider low truncated modes to improve the computational efficiency. The current work is focused on improving the computational efficiency using a AS and a frequency sweep algorithm. Finite element simulation for a MEMS resonator array showed that the performance of the presented method is superior to a conventional method.