• 제목/요약/키워드: Freezing Method

검색결과 692건 처리시간 0.034초

인간 다-전핵기 (>2PN) 수정란의 초급속 동결에 관한 연구 (Cryopreservation of Human Multi-Pronuclear (PN) Zygote by Ultra-Rapid Freezing)

  • 김은영;이봉경;남화경;이금실;윤산현;박세필;정길생;임진호
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제25권2호
    • /
    • pp.129-134
    • /
    • 1998
  • 본 연구는 인간 전핵기 수정란의 동결시 election microscope grid론 사용하는 초급속 동결방법이 유용하는지 여부를 조사하고자 실시하였다. 본 실험에서는 인간 IVF 시술시 생성되는 다-전핵기 (>2PN) 수정란을 정상 2PN 수정란 대신 사용하였으며, 또한 이들은 3PN과 $\geq4PN$ 수정란으로 나누어 전핵의 수에 따른 냉해와 융해 후 체외 배발달율을 조사하였다. 동해제는 30% ethylene glycol, 18% ficoll, 0.5 M sucrose와 10% FBS 등이 D-PBS에 첨가되어 제작된 EFS30을 사용하였다. 본 연구에서 얻어진 결과는 다음과 같다. 초급속동결-융해 후, 인간 다-전핵기 수정란의 생존율은 85.5%였다. 대조군과 동결군의 난할율을 진핵의 수에 따가 니누어 비교하였을 때, 각 군간에는 유의한 차이를 나타내지 않았다 (3PN; 81.3%와 85.4%, $\geq4PN$; 90.0%와 95.7%). 또한, 융해 후 체외발달율을 조사하였던바, $\geq4PN$수정란에서는 동결군 (4.5%)의 체외발달이 대조군 (44.4%)보다 유의하게 낮게 나타났던 반면, 3PN 수정란에서는 동결군 (22.0%)의 결과가 대조군 (38.5%)에 비해 유의한 차이를 나타내지 않았다. (p<0.05). 따라서 인간 다-전핵기 수정란은 EM grid와 EFS30 동결액을 이용한 초급속 동결로 배발달을 유도할 수 있다는 것을 알 수 있었다.

  • PDF

a해산어의 부분동결에 의한 $Ca^{2+}\;및\;Mg^{2+}$ -dependent Adenosin Triphosphatase 활성 및 근섬유의 미세구조 변화 III. 저온저장 과정중 방어 근육조직의 미세구조의 변화 (Changes in the $Ca^{2+}\;and\;Mg^{2+}$ - dependent Adenosine Triphosphatase Activity and Ultrastructure of Marine Fishes by Partial Freezing III. Changes in the Ultrastructure of Muscle Tissues of Yellowtail during Low-temperature Preservation)

  • 최경호;박찬성
    • 한국식품영양과학회지
    • /
    • 제20권6호
    • /
    • pp.629-636
    • /
    • 1991
  • 방어를 공시어로 하여 빙장($0^{\circ}C$), PF저장($-3^{\circ}C$) 및 동결저장($-20^{\circ}C$)하면서 자장과정중 일어나는 근육 조직의 변화를 현미경적으로 관찰하여 다음과 같은 결과를 얻었다. 빙장의 경우에는 저장 3일째에 glycogen이 소실되고 mitochondria 내막이 퇴행되었으며 근원섬유도 절단되었다. 근원섬유의 절단면은 동근 형태를 나타내었다. PF저장시에도 glycogen이 소실되고 mitochondria가 퇴행되었으나 그 정도는 빙장에 비하여 경미하였다. 저장 3일째에 빙결정이 생성되어 저장기간이 길어질수록 크기와 숫자가 증가되었으나 빙결정의 모양이 둥근 모습이었으며 주된 생성부위가 섬유속 사이로서 myofibril의 손상은 경미하였다. 동결저장시에는 저장 14일까지 glycogen입자가 관찰 되었고 mitochondria도 내막구조를 유지하였으나 저장 3일째부터 섬유속 내부에까지 빙결정이 생성되었으며 이로 인하여 myofibril이 손상되었다. 절단된 섬유속의 선단은 빙장의 경우와는 달리 불규칙한 모습이었다. 이상의 결과로부터 PF저장법이 단기간(약 2주)의 생선저장에는 빙장에 비하여 효소활성이 억제되고 동결저장에 비하여 빙결정에 의한 myofibril의 손상이 적은 효과적인 방법으로 판정되었다.

  • PDF

Pressure Bomb법을 이용한 섬유방향 액체투과성 측정 (Measurement of Longitudinal Liquid Permeability Using Pressure Bomb Method)

  • 허종윤;강호양
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권3호
    • /
    • pp.66-74
    • /
    • 1997
  • Liquid permeabilities of red oak and several softwoods were measured by the pressure bomb method and a modified liquid permeability method in order to investigate their efficacy. The effect of preboiling and prefreezing on wood permeability were also examined for both green and resaturated specimens. Regardless of some disadvantages these two methods were revealed as a handy tool for quick evaluation of the permeability of an unknown species. The permeabilities of the resaturated specimens increased when preboiled. but decreased when prefrozen. For green specimens, however, pre freezing increased permeability. The discrepancy of the pre freezing effect on two specimens partially attributes to their difference of initial permeabilities. For all species except radiata pine heartwood, the radii of the effective capillary pores, derived from the water potential equation, distribute from $0.42{\mu}m$ to $7.2{\mu}m$. Those of radiata pine heartwood are below $0.46{\mu}m$.

  • PDF

디지털 포렌식 관점에서 SSD TRIM 명령의 선별적 복구 (Selective Recovery of the SSD TRIM Command in Digital Forensics)

  • 황현호;박동주
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제4권9호
    • /
    • pp.307-314
    • /
    • 2015
  • 최근 보조기억장치 스토리지 시장 추세는 HDD와 SSD가 혼용되어 사용되고 있다. 미래에는 HDD보다 SSD가 보조기억장치 역할로 더욱 많이 사용될 것으로 예상되고 있다. SSD 기술이 발달하면서 이를 효율적으로 사용하기 위해 TRIM 명령기법이 나오게 되었다. TRIM 명령기법은 과거 SSD의 문제점인 Freezing 현상을 해결하기 위해 나온 명령으로 운영체제와 SSD가 협동하여 작동한다. TRIM 명령기법은 사용자가 데이터를 삭제하였을 때 SSD 내부에서도 실제로 삭제하는 기법으로 유휴시간에 수행한다. 하지만, 디지털 포렌식 관점에서 본다면 디지털 범죄는 매년 급증하지만 데이터 미복구로 인한 검거율은 미흡하다. 본 논문에서는 기존 TRIM 명령의 장점인 안정성(Freezing Solution)과 쓰기 속도를 최대한 지원하며 선별적으로 데이터를 관리하여 삭제하는 기법을 제안한다. 실험을 통해 기존 기법과 선별된 기법의 성능을 측정하여 검증한다.

배관의 결빙에 의한 열변형 및 열응력 해석 (Thermal deformation and thermal stress analysis of pipe during pipe internal fluid freezing)

  • 박영돈;변상규;강범수
    • 대한기계학회논문집A
    • /
    • 제22권1호
    • /
    • pp.227-237
    • /
    • 1998
  • In case the systems have radioactivity, toxic liquid or expensive fluid, and have to be performed repair work at one point of the system pipe, the formation of an internal ice plug by the removal of heat from the pipe is often consideredas a useful method. In this procedure, an annular jacket is placed around the pipe, and the jacket is then filled with liquid Nitrogen(-196.deg. C). Thermal analysis by the finite element method based on the laboratory experiments has been constructed. The result of the finite element analysis on the experimental model shows to be reasonable, and thus the finite element analysis for different pipe size, material and thickness has been performed to see if the ice plugging procedure in various applications can be safely performed without possibility of damage to the pipe. It has been confirmed that in carbon steel pipes the maximum stress is found around the boundary of the freezing jacket, and the stress increases as pipe thickness increases, but the maximum stress shows no consistency along the increment of the pipe diameter. The maximum stresses appear lower than yield stress in carbon steel. It has been also shown that in stainless steel pipes the maximum stresses are also found around the boundary of the freezing jacket, but almost the same value in spite of different pipe size an thickness, and the maximum stresses show slightly higher than the yield stress of the stainless steel.

액상형 조강제의 동결특성 및 동결방지 방안에 관한 실험적 고찰 (Experimental Study of Freezing Characteristics and Antifreezing Method of Liquid Additive for Early Strength)

  • 이문환;류득현
    • 콘크리트학회논문집
    • /
    • 제19권5호
    • /
    • pp.647-653
    • /
    • 2007
  • 레디믹스트콘크리트 공장에서 동절기에 고분자 화학 혼화제, 특히 조기강도 확보를 위해 개발된 액상형 조강제를 사용할 경우, 해당 혼화제의 저장 안정성을 검토할 필요가 있다. 본 연구에서는 액상형 조강제의 동결 및 겔화 특성을 검토하고, 이를 방지할 수 있는 재료적, 설비적 해결 방안을 제시하여, 실무 적용시의 품질관리 방안으로 제시하고자 하였다. 검토 결과, 액상형 조강제의 동결온도는 $-11.8^{\circ}C$ 정도로 확인되어 콘크리트의 강도 발현 온도한계보다 낮은 온도 범위로서 안정적인 것을 확인하였으며, $SiO_2$$Na_2O$의 mol비를 0.31 수준으로 디자인한 sodium silicate를 $37{\pm}0.5%$ 포함시켜 제조함에 따라 저온에서의 겔화를 최소화하는 한편, 이의 저장 및 공급을 위해 고안된 설비 시설은 공급탱크의 온도를 $40^{\circ}C$ 정도로 설정하여 설비 전단계의 온도 분포가 실무 활용상 문제가 없음을 확인할 수 있었다.

고압동결고정을 이용한 애기장대 줄기의 cryo-SEM 분석법 (Cryo-SEM Methodology of Arabidopsis thaliana Stem Using High-Pressure Freezing)

  • 최윤정;이경환;제아름;채희수;장지훈;이은지;권희석
    • Applied Microscopy
    • /
    • 제42권2호
    • /
    • pp.111-114
    • /
    • 2012
  • The scanning electron microscopy is an ideal technique for examining plant surface at high resolution. Most hydrate samples, however, must be fix and dehydrate for observation in the scanning electron microscope. Because the microscopes operate under high vacuum, most specimens, especially biological samples, cannot withstand water removal by the vacuum system without morphological distortion. Cryo-techniques can observe in their original morphology and structure without various artifacts from conventional sample preparation. Rapid cooling is the method of choice for preparing plant samples for scanning electron microscopy in a defined physiological state. As one of cryo-technique, high-pressure freezing allows for fixation of native non-pretreated samples up to $200{\mu}M$ thick and 2 mm wide with minimal or no ice crystal damage for the freezing procedure. In this study, we could design to optimize structural preservation and imaging by comparing cryo-SEM and convention SEM preparation, and observe a fine, well preserved Arabidopsis stem's inner ultrastructure using HPF and cryo-SEM. These results would suggest a useful method of cryo-preparation and cryo-SEM for plant tissues, especially intratubule and vacuole rich structure.

동결 삼축압축시험을 통한 동결 사질토의 온도 및 구속압력에 따른 역학적 특성 평가 (Evaluation of the Mechanical Characteristics of Frozen Sand, Considering Temperature and Confining Pressure Effects, in a Cryogenic Triaxial Compression Test)

  • 박상영;정상훈;황채민;최항석
    • 한국지반공학회논문집
    • /
    • 제38권8호
    • /
    • pp.7-15
    • /
    • 2022
  • 대부분의 선행연구는 동결 삼축압축시험 수행 시, 몰드를 사용하여 시료를 조성하고 단방향으로 동결을 진행하였다. 이는 동결된 시료에 잔류응력이 발생할 가능성이 있기 때문에 인공동결공법이 적용된 지반을 모사하는데 한계가 있다. 본 연구에서는 기존 시험방법의 한계를 보완할 수 있는 시험장비 및 시험방법을 제안하고, 제안된 방법으로 온도 및 구속압력에 따른 동결 사질토의 역학적 특성을 평가하였다. 동결온도가 낮아질수록 동결 사질토는 취성이 증가하였고, 부동수분의 감소 및 얼음자체의 강도 증가로 인하여 강도가 증가하였다. 구속압력의 증가는 강도저감 효과를 발생시키는 압력융해 현상과 강도증진 효과를 발생시키는 흙 입자의 마찰력 증가 모두를 야기하였다. 이처럼 동결 사질토의 역학적 거동은 구속압력과 동결온도의 복합적인 영향을 받는 것으로 나타났다.

차염성 저발열시멘트의 급속동결융해 저항성에 관한 실험적 연구 (An Experimental Study on Resistance of rapid Freezing and Thawing of Chloride-inhibiting Low-Heat Cement)

  • 심종성;박철우;박성재;강태성;주민관;김태수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.589-592
    • /
    • 2008
  • 이 연구는 겨울철 동결융해 작용으로 인한 차염성 저발열시멘트(CLC)의 내구성을 알아보고자 수행하였다. 내구성 문제는 현장여건에 따라 다소 차이는 있으나, 계절변화에 따른 반복적인 동결융해작용에 의한 콘크리트의 동해는 내구성 저하의 대표적 현상이라 할 수 있으며, 겨울철 동결융해를 받는 콘크리트는 내부에서 큰 팽창력이 발생되어 콘크리트 균열, 표면 박리, 골재 이탈 등의 파손현상을 보이게 된다. 따라서 이 연구에서는 개발된 차염성 저발열시멘트(CLC)의 동결융해 저항성에 따른 내구성 지수를 알아보기 위해 차염성 저발열시멘트(CLC)와 현재 많이 사용되고 있는 고로슬래그시멘트(BFS), 보통 포틀랜드시멘트(OPC)을 각각 물/시멘트비 35%, 40%, 45% 을 변수로 하여 배합을 실시 하여 공시체를 제작하였다. 제작된 공시체를 KS F 2456(급속동결 융해에 대한 콘크리트의 저항 시험방법)방법에 따라 동결융해 시험을 실시하여 상대 동탄성 계수를 측정하였으며, 측정된 상대동탄성 계수를 가지고 내구성지수를 도출하였다. 내구성 지수를 비교 분석한 결과 차염성 저발열시멘트(CLC), 고로슬래그 시멘트(BFS), 보통 포틀랜드 시멘트(OPC) 모두 우수한 내구성 지수를 나타내는 것으로 확인 되었다.

  • PDF